| Content | The Swiss Army Knife of microphones
for vocal and instrumental recording, on stage, in ENG/EFP and video production
The C1000 S from AKG is a small-diaphragm condenser microphone with a cardioid pattern designed for recording, live-sound, ENG and video-production applications with vocals and instruments. Using the included polar-pattern converter accessory, the microphone can be switched from cardioid to hypercardioid to reduce feedback when used on stage. The presence-boost adapter offers three discrete frequency settings to add clarity to speech and instrument sounds.
A switchable low-cut filter at 80 Hz helps reduce rumble or wind noise, and a switchable 10 dB pad enables distortion-free recording of very loud sound sources associated with proximity miking. If no phantom power is available, the C1000 S can be powered by two standard AA batteries for up to 120 hours.
Featuring a pre-polarized design encased in a sturdy metal chassis, a gold-sputtered microphone capsule housing and gold-plated XLR pins, this microphone is well suited for mobile applications such as broadcast and interviews, even in high-humidity environments.
The C1000 S comes with a stand adapter, a foam windscreen and a microphone bag.
- Presence-boost adapter offers three discrete frequency settings to add clarity to speech and instrument sounds
- Polar-pattern converter allows microphone pattern to be switched from cardioid to hypercardioid
- Pre-polarized design, gold-sputtered microphone-capsule housing and gold-plated XLR pins make this microphone well suited for portable applications and high-humidity environments
- Switchable low-cut filter at 80 Hz to reduce rumble or wind noises which may cause distortion at low frequencies.
- Switchable 10 dB pad to enable distortion-free recording of very loud sound sources in proximity miking
- If no phantom power is available, the C1000 S can be powered by two standard AA batteries for up to 120 hours
- Sturdy metal chassis and specialized mic clip to keep microphone securely attached to stands
| General |
| Audio Frequency bandwidth |
50 to 20000 Hz |
| Sensitivity |
6 mV/Pa |
| Equivalent Noise Level |
21 dB-A |
| Signal to Noise |
73 dB-A |
| Preattunation Pad |
10 dB |
| Bass Cut Filter |
80 Hz |
| Electrical Impedance |
200 Ohms |
| Recommended Load Impedance |
2000 Ohms |
|
| Polar Patterns |
| Polar Pattern |
hypercardioid; cardioid |
| Number |
2 |
|
| Powering Interface |
| Voltage |
9 to 52 V |
| Current |
3 mA |
|
| Audio Output |
| Type |
Balanced XLR |
| Gender |
Male |
| Contacts |
3-pin |
|
| Design |
| Body |
metal |
| Finish |
matte grayish blue |
|
| Dimensions / Weight |
| Length |
229 mm |
| Height |
34 mm |
| Diameter |
34 mm |
| Net Weight |
320 g |
|
| AKG C411L Ultralight Condenser Microphone
- Ultra-light vibration pickup
- Condenser transducer in sealed enclosure
- Cable with lockable miniature XLR connector
Weighing only 18 grams (0.6 oz.), this ultra-light condenser pickup is ideal for acoustic guitar, mandolin, violin, and most other stringed instruments. The C 411 will give a clear and uncolored sound without changing the balance of the instrument. Attaching the C 411 on or near the bridge or anywhere else on the instrument is easy with the included non-marring, reusable, solventfree adhesive compound.
C 411 L: With mini XLR connector for use with B 29 L battery operated power supply, MPA V L external phantom power adapter, or AKG WMS bodypack transmitters.
| Frequency range |
10 to 18,000 Hz |
| Max. SPL |
100 dB (for 1% THD) |
| Impedance |
200 ohms unbalanced |
| Recommended load impedance |
>=1000 ohms |
| Supply voltage |
9 to 52 V phantom power to DIN 45596 or battery powering from B 29 L or AKG bodypack transmitter |
| Current consumption |
approx. 2.2 mA |
| Connector |
C 411 L: 3-pin mini XLR |
| Cable |
C 411 L: 1.5 m (5 ft.) |
| Finish |
matte black |
| Dimensions |
27 x 14 x 9.5 mm / 1.1 x 0.5 x 0.3 in. |
| Net weight |
C 411 L: 18 g / 0.7 oz. |
| Shipping weight |
C 411 L: 150 g / 5.5 oz. |
| The NT5 matched pairs are a masterpiece of small-diaphragm cardioid-
condenser microphone design.Intended for recording acoustic instruments,
drum overheads, cymbals and live performances, the compact externally
polarized mic employs a .5? capsule, an active J-FET impedance converter
with bipolar output buffer.
Finished in durable satin nickel, the NT5 is intended for either single or stereo
X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case
with windshields and mounts.
SPECIFICATIONS:
Acoustic principle: Externally polarised single diaphragm
Directional pattern: Cardioid
Frequency range: 20Hz - 20kHz
Output impedance: 100?
Signal noise ratio din iec 651: 78dB
Equvalent noise: Maximum spl: 143 dB @ 1% THD into 1k_
Sensitivity:
-38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL
Power supply voltage: P48 Supply (38V?52V), P24 Supply (20V-26V)
Current consumption: 4 mA, 2 mA,
Weight: 100g |
The ME 65 is a super-cardioid microphone head designed for use with the K6 and K6P powering modules. It is especially suited to vocal and speech applications. Matt black, anodised, scratch-resistant finish.
- Pick-up pattern : super-cardioid
- Sensitivity in free field, no load (1kHz) : 10 mV/Pa +- 2,5 dB
- Nominal impedance : 200 Ohm (K6)
- Min. terminating impedance : 1000 Ohm (K6)
- Equivalent noise level : 20 dB
- Dimensions : d 44 x 131 mm
-
Weight :
|
Weighing only 18 grams (0.6 oz.), this ultra-light condenser pickup is ideal for acoustic guitar, mandolin, violin, and most other stringed instruments. The C 411 will give a clear and uncolored sound without changing the balance of the instrument. Attaching the C 411 on or near the bridge or anywhere else on the instrument is easy with the included non-marring, reusable, solventfree adhesive compound.
C 411 PP: For hardwire applications, with standard XLR connector for phantom powering. | Technical specifications
| Polar pattern |
cardioid |
| Frequency range |
50 to 20,000 Hz |
| Sensitivity |
20 mV/Pa (?34 dBV) |
| Max. SPL |
125 dB (k=1 %) |
| Equivalent noise level |
21 dB-A |
| Signal/noise ratio (A-weighted) |
73 dB |
| Impedance |
600 ohms |
| Recommended load impedance |
>2000 ohms |
| Supply voltage |
9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules) |
| Current consumption |
|
| Connector |
Discreet Acoustics Modular standard |
| Finish |
matte dark gray |
| Dimensions |
13.5 x 20 mm dia. (0.5 dia. x 0.8 in.) |
| Net weight |
5 g (0.17 oz.) |
| Shipping weight |
88 g (3.1 oz.) |
| Accessories (included) |
W 30 |
|
Reviews
There are no reviews yet.