TOA HS-1500BT Coaxial Array Speaker System 60W/100V

511.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The HS-1500BT is a 2-way speaker system made of resin, and features a large diameter woofer. It can be installed and used in many different applications with combined use of the supplied accessories and/or the optional mounting brackets. Specification Enclosure Sealed type Rated Input 60 W (High Impedance) Power Handling Capacity Continuous pink noise: 100 […]

 

Read more

The HS-1500BT is a 2-way speaker system made of resin, and features a large diameter woofer. It can be installed and used in many different applications with combined use of the supplied accessories and/or the optional mounting brackets.

Specification
Enclosure Sealed type
Rated Input 60 W (High Impedance)
Power Handling Capacity Continuous pink noise: 100 W (Low Impedance)
Continuous program: 300 W (Low Impedance)
Rated Impedance 8 Ω
100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W)
70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W)
Sensitivity 98 dB (1 W, 1 m)
Frequency Response 60 – 20,000 Hz
Crossover Frequency 3 kHz
Directivity Angle Horizontal: 90゜, Vertical: 40゜
Speaker Component Low frequency: 38 cm (15) cone-type
Input Terminal NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
Operating Temperature -10℃ to +50℃ (14゜F to 122゜F)
Finish Enclosure: Polypropylene, black
Punched net: Surface-treated steel plate, black
Dimensions 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05″ × 15.75“)“
Weight 14 kg (30.86 lb)
Accessory Handle …1, Handle fitting bracket …2, Handle mounting screw …2, Rubber foot …2,
Rubber foot mounting screw …2
Option Mounting bracket: HY-1500VB (for vertical speaker mounting)
HY-1500HB (for horizontal speaker mounting)
Ceiling mount bracket: HY-C0801
Wall mount bracket: HY-W0801
Speaker stand: ST-33B

 

Weight 14.00 kg

Reviews

There are no reviews yet.

Be the first to review “TOA HS-1500BT Coaxial Array Speaker System 60W/100V”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA HS-1500BT Coaxial Array Speaker System 60W/100V removeTOA BS-633A Wall mount speaker removeJBL CONTROL 28T-60-WH 8 inch, 2-way System with 70V/100V Transformer removeDAP AUDIO D6322 PST-215 Bi Direction Projector Speaker 15W incl.100V Line Transformer removeTOA F-2000WT Speaker 8" 2 Way, 60W/70Volt, White removeTOA F-2000BTWP Speaker, 8" 2 Way, 60W/70Volt, Black remove
NameTOA HS-1500BT Coaxial Array Speaker System 60W/100V removeTOA BS-633A Wall mount speaker removeJBL CONTROL 28T-60-WH 8 inch, 2-way System with 70V/100V Transformer removeDAP AUDIO D6322 PST-215 Bi Direction Projector Speaker 15W incl.100V Line Transformer removeTOA F-2000WT Speaker 8" 2 Way, 60W/70Volt, White removeTOA F-2000BTWP Speaker, 8" 2 Way, 60W/70Volt, Black remove
Image
SKUHS-1500BTBS-633ACONTROL 28T-60-WHD6322F-2000WTF-2000BTWP
Rating
Price 511.00 incl. GR VAT 24.73 incl. GR VAT 313.00 incl. GR VAT 64.45 incl. GR VAT 269.00 incl. GR VAT 226.99 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Only 2 left in stock

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockOnly 2 left in stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The HS-1500BT is a 2-way speaker system made of resin, and features a large diameter woofer. It can be installed and used in many different applications with combined use of the supplied accessories and/or the optional mounting brackets.

Specification
Enclosure Sealed type
Rated Input 60 W (High Impedance)
Power Handling Capacity Continuous pink noise: 100 W (Low Impedance)
Continuous program: 300 W (Low Impedance)
Rated Impedance 8 Ω
100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W)
70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W)
Sensitivity 98 dB (1 W, 1 m)
Frequency Response 60 - 20,000 Hz
Crossover Frequency 3 kHz
Directivity Angle Horizontal: 90゜, Vertical: 40゜
Speaker Component Low frequency: 38 cm (15) cone-type
Input Terminal NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
Operating Temperature -10℃ to +50℃ (14゜F to 122゜F)
Finish Enclosure: Polypropylene, black
Punched net: Surface-treated steel plate, black
Dimensions 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05" × 15.75“)“
Weight 14 kg (30.86 lb)
Accessory Handle …1, Handle fitting bracket …2, Handle mounting screw …2, Rubber foot …2,
Rubber foot mounting screw …2
Option Mounting bracket: HY-1500VB (for vertical speaker mounting)
HY-1500HB (for horizontal speaker mounting)
Ceiling mount bracket: HY-C0801
Wall mount bracket: HY-W0801
Speaker stand: ST-33B

 

The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.

SPECIFICATIONS
BS-633A  
Rated Input: 6W (100V line), 3W (70V line)
Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W)
Sensitivity (1W, 1m): 91dB
Frequency Response: 120 – 15,000Hz (–20dB)
Speaker Component: 5" (12cm) cone-type
Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)
Connetion: Push-in connector (bridging terminal)
Operating Temperature: –10°C to 50°C (14°F to 122°F)
Finish: Case: ABS resin, off-white
Rear bord: Hard board
Dimensions: 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“)
Wall Mounting Case front mount: 184mm (7.24“)
Dimensions: Fixing hole mount: 120mm (4.72“)
Weight: 780g (1.72 lb)
Accessory: Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16(0.16" x 0.63“)) × 2

 

  • 55 Hz to 15 kHz frequency range (-10 dB)
  • 175 watts continuous program power capacity
  • 60W, 30W, 15W, 7.5W taps at 70V
  • 60W, 30W, 15W taps at 100V
  • 2.8 kHz crossover frequency
  • High-Impact Polystyrene (HIPS) enclosure
  • Spring-loaded input terminals
  • Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
  • Net Weight: 6.3 kg (14 lb)

100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.

 

Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin

 

F-2000 Series indoor speaker designed to provide high quality sound and reliable performance for restaurants, retail and audio/visual applications. Features include two-way bass-reflex design, high impact polystyrene enclosure with an 8" low frequency driver and dome tweeter. For challenging acoustic environments, users can easily reduce the high frequency dispersion of F-2000 models by simply installing an included horn adapter. White, 70V.

Features:

  • Compact box speakers for music and voice paging distribution
  • Excellent sound quality
  • Octagonal horn design for smooth coverage
  • Adjustable high frequency dispersion
  • Extruded cabinet design improves low frequency performance
  • Individual protection circuit on each component
  • Screwdriver-adjustable power taps
  • Paintable grille and enclosure
  • Wall/ceiling-mount bracket included
  • Optional board, cluster and pole-mount brackets
  • OmniMount-compatible (Series 20.5CA/WA)
  • Optional subwoofers, model HB-1, FB-100 or FB-120
  • Five year warranty

Specifications:

  • LF Driver: 8” cone woofer
  • HF Driver: 1” hard-dome tweeter
  • Crossover: 2.5kHz
  • Power Handling: 180W (cont. PGM), 60W (pink noise), 60W (70V transformer version)
  • Sensitivity (1W, 1m): 93dB SPL
  • Dispersion (adjustable):
    110° H x 100 ° V
    80° H x 80° V

F-2000 Series outdoor speaker designed to provide high quality sound and reliable performance for restaurants, retail and audio/visual applications. Features include two-way bass-reflex design, high impact polystyrene enclosure with an 8" low frequency driver and dome tweeter. For challenging acoustic environments, users can easily reduce the high frequency dispersion of F-2000 models by simply installing an included horn adapter. Black, 70V.

Features:

  • Compact box speakers for music and voice paging distribution
  • Excellent sound quality
  • Octagonal horn design for smooth coverage
  • Adjustable high frequency dispersion
  • Extruded cabinet design improves low frequency performance
  • Individual protection circuit on each component
  • Screwdriver-adjustable power taps
  • Paintable grille and enclosure
  • Wall/ceiling-mount bracket included
  • Optional board, cluster and pole-mount brackets
  • OmniMount-compatible (Series 20.5CA/WA)
  • Optional subwoofers, model HB-1, FB-100 or FB-120
  • Five year warranty

Specifications:

  • LF Driver: 8” cone woofer
  • HF Driver: 1” hard-dome tweeter
  • Crossover: 2.5kHz
  • Power Handling: 180W (cont. PGM), 60W (pink noise), 60W (70V transformer version)
  • Sensitivity (1W, 1m): 93dB SPL
  • Dispersion (adjustable):
    110° H x 100 ° V
    80° H x 80° V
Weight14.00 kg0.78 kg6.30 kg1.00 kg6.50 kg6.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 14.00 kg
Weight 0.78 kg
Weight 6.30 kg
Weight 1.00 kg
Weight 6.50 kg
Weight 6.50 kg