TOA A-2060 60 Watt Amplifier

Discontinued

257.99 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
High cost-performance Suitable for commercial audio systems in schools, offices, shops, restaurants, factories, houses of worship, and large meeting rooms. Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs. Improved durability compared with conventional TOA models. Flexibility A wide range of power outputs from 30W to 240W Offers a […]

 

Read more

High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.

Specification
Power Source 220 – 240V AC or 24V DC
Rated Output 60W
Power Consumption 72W (EN60065), 150W(AC operation at rated output, 4A (DC operation at rated output)
Frequency Response 50 – 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 – 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:170W (100V)
LOW IMPEDANCE: 4Ω (15.5V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 – 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 280.2 (D) mm
Weight 7kg

 

Weight 7.00 kg

Reviews

There are no reviews yet.

Be the first to review “TOA A-2060 60 Watt Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA A-2060 60 Watt Amplifier removeCrown CDI-1000 2x700W-4Ω Power Amplifier removeTOA VP-200VX-BGM Input & BGM Module for VX-2000 Series removeCROWN CDI-4000 Power amplifier 2X1200W/4ohm, 2Χ1000W/70V removeINTER-M PAM-120 Mixer/Amplifier removeINTER-M PAM-510 ZONE AMPLIFIER 120W remove
NameTOA A-2060 60 Watt Amplifier removeCrown CDI-1000 2x700W-4Ω Power Amplifier removeTOA VP-200VX-BGM Input & BGM Module for VX-2000 Series removeCROWN CDI-4000 Power amplifier 2X1200W/4ohm, 2Χ1000W/70V removeINTER-M PAM-120 Mixer/Amplifier removeINTER-M PAM-510 ZONE AMPLIFIER 120W remove
Image
SKUA-2060CDI-1000VP200VX-BGMCDI-4000PAM-120PAM-510
Rating
Price 257.99 incl. GR VAT 1,235.00 incl. GR VAT 83.81 incl. GR VAT 2,215.00 incl. GR VAT 437.00 incl. GR VAT 796.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

In stock

In stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 60W
Power Consumption 72W (EN60065), 150W(AC operation at rated output, 4A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:170W (100V)
LOW IMPEDANCE: 4Ω (15.5V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 280.2 (D) mm
Weight 7kg

 

Crown CDi 1000 2x700W-4Ω Power Amplifier

The Crown? CDi 1000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply.
The outputs shall be usable as dual or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items and front panel lockout.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, illuminates when a very low-level
signal is present at input.
?10 Indicator: Green LED fl ashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED fl ashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature
conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker. Dual connectors shall work with 2-8 ohm or
70V loads. Bridge-mono connectors shall work with 4-8 ohm or 140V loads.
HiQnet USB Connector: Type B, connects to a USB port on a PC.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Dual (per channel): 700W with 1% THD, 4 ohm Dual (per
channel): 500W, 8 ohm Dual (per channel) 275W, 4 ohm Bridge-Mono: 1,400W
with 1% THD, 8 ohm Bridge-Mono: 1,000W, 70V Dual (per channel): 500W.
Voltage Gain at 1kHz, 8 ohm rated output: 30.5 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity: 1.4V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 100 dB
(A weighted).
Damping Factor: Better than 500 from 20 Hz to 400 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 6.5A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
Input EQ: 6 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
Also adjustable high and low shelving fi lters. This 8-fi lter EQ section can be
bypassed.
Crossover Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24
dB per octave and Linkwitz-Riley 24/48 dB per octave. Also includes ±15 dB
bandpass gain and polarity control.
Output EQ: 8 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
This 8-fi lter EQ section can NOT be bypassed. Filters are enabled individually.
Delay: Up to 50 msec total delay per channel.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Presets: 20 presets. 19 are user-definable.
Protection shall include the following:
CDi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airfl ow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg).
The amplifier shall be designated the Crown CDi 1000.

The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with theVP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.

Specifications

Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) +0/–1 dB
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) 100 dB
Damping Factor (8 ohm): 20 Hz to 400 Hz > 500
Input Stage Input is electronically balanced and employs
precision 1% resistors
AC Line Current CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A
At idle: Draws no more than 45 watts.
Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB
Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads)
Dual
Bridge mono
2–8 ohms
4–16 ohms
Voltage Gain (at 1 kHz, 8 ohm rated output) CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB
Sensitivity (at 8 ohm rated output) 1.4V
Maximum Input Signal +22 dBu typical
Operating Temperature 0° C to 40° C at 95% relative humidity (non-condensing)
AC Line Voltage and Frequency Configurations Available (± 10%) 100V, 120V-240V, 50/60 Hz
Ventilation Flow-through ventilation from front to back
Cooling Heat sinks and proportional-speed fan
Dimensions: Width, Height, Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B)
x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D
Net Weight, Shipping Weight 19 lb (8.6kg), 22 lb (10.0 kg)

- MODULAR DESIGN

Optional modules can be installed in multiple configurations for convenience and ease of use. Choose the PAM-CDA (Compact Disc), PAM-T (AM/FM Tuner) or PAM-D (Cassette Deck) modules to expand the PAM-120A/340A/480Aʼs audio capabilities.

- INDIVIDUAL INPUT GAIN CONTROLS

Rear-panel gain controls for each input channel for total control of individual levels.

- SPEAKER SELECT

Six speaker select switches enable you to select any combination of up to five speakers.

- SELECTABLE PRIORITY MUTING

Switchable audio signal priority for Channels 1 and 2, Chime and Telephone input over other input sources.

- REMOTE CONTROL INPUT (only PAM-340A/480A)

Individual speaker zones can be selected and chime can be operated by wired remote control.

- ANNOUNCEMENT CHIME

Convenient four-tone chime for use with announcements.

- EM(EMERGENCY) - OPTIONAL EMERGENCY VOICE IC (only PAM-340A/480A)

When EM switch is pressed in emergencies, EM broadcasting stored in VOICE IC is outputted.

Rated Output Power

PAM-120A(THD 1%) : 120W (RMS)

PAM-340A(THD 3%) : 340W (RMS)

PAM-480A(THD 3%) : 480W (RMS)

Frequency Response

Amp In

80Hz~20kHz

Link In

80Hz~15kHz

CH1~CH6

120Hz~8kHz

Remote In

120Hz~8kHz(PAM-340A, PAM-480A)

T.H.D.(at 1kHz Rated Output)

Less than 1%(PAM-120A)

T.H.D.(at 1kHz Half Power Output)

Less than 0.5%(PAM-340A, PAM-480A)

S/N

Amp In

Better than 90dB(PAM-120A)

Better than 88dB(PAM-340A/480A)

Link In

Better than 65dB

CH1~CH6

Better than 50dB

Remote In

Better than 50dB(PAM-340A/480A)

Input Sensitivity/Impedance

CH1~CH6

TRIM VR -60dB Position

1mV/10kΩ

TRIM VR -16dB Position

158mV/10kΩ

Link In

100mV/10kΩ

Amp In

1V/47kΩ(PAM-120A)

1V/20kΩ(PAM-340A/480A)

Remote In

1V/10KΩ(PAM-340A/480A)

Speaker Output/Impedance

PAM-120A : 120W/4Ω, 70V/42Ω, 100V/83Ω

PAM-340A : 340W, 100V/29.4Ω

PAM-480A : 480W, 100V/20.8Ω

Preamp Output/Impedance

1V/600Ω

Tone Control (100Hz, 10kHz)

±12dB

CH1~CH6 EQ Control (100Hz, 1kHz, 10kHz)

±12dB

Power Source

100–120VAC or 220V–240VAC; 50/60Hz, 24V DC(only PAM-120A)

(Supplied AC mains transformer depends on country requirements)

Power Consumption

PAM-120A : 135W(1/8 POWER), 200W(1/3 POWER), 300W(FULL POWER)

PAM-340A : 260W(1/8 POWER), 400W(1/3 POWER), 620W(FULL POWER)

PAM-480A : 360W(1/8 POWER), 550W(1/3 POWER), 880W(FULL POWER)

Weight

PAM-120A : 13kg/28.7lb

PAM-340A : 13.5kg/29.7lb

PAM-480A : 15.5kg/34.2lb

Dimensions

420(W) x 132(H) x 360(D)mm/16.5(W) x 5.2(H) x 14.2(D)in

Operation Temperature

14F~104F (-10°C~+40°C)

※ Specifications and design subject to change without notice.

- SPEAKER SELECT(5ZONE SPEAKER OUTPUT)

Six speaker select switches enable you to select any combination of up to five speakers.

- SELECTABLE PRIORITY MUTING

Switchable audio signal priority for MIC Channels 1, siren, Chime and Telephone input over other input sources.

- MONITOR SPEAKER

You can monitor output signal by using the monitor speaker, and can control the monitor level on front panel by 3 step lever switch.

- ANNOUNCEMENT CHIME

Convenient four-tone chime for use with announcements.

- REMOTE CONTROL INPUT

Individual speaker zones can be selected and chime can be operated by wired remote control.

- EM(EMERGENCY)

When EM switch is pressed in emergencies, EM broadcasting stored in VOICE IC is outputted.

- REMOTE POWER

You can turn on/off amplifier by remote control.

- INDIVIDUAL INPUT GAIN CONTROLS

Rear-panel gain controls for each input channel for total control of individual levels.

- MODULAR DESIGN

Optional modules can be installed in multiple configurations for convenience and ease of use. Choose the PAM-CDA (Compact Disc), PAM-T (AM/FM Tuner) or PAM-D (Cassette Deck) modules to expand the PAM-510/520ʼs audio capabilities.

ACCESSORIES

One detachable AC power cord is provided for use with this product.

PAM-510

PAM-520

Amplifier Section

(Amp In@1kHz,

4Ω Load Output)

Rated Output Power (THD 1%)

120W(RMS)

240W(RMS)

Speaker Zone 1~5 Output

25W MAX

50W MAX

Input Sensitivity/Impedance

1V/20kΩ

S/N

Better than 85dB

Frequency Response

(at 1kHz Half Power Output, ±3dB)

80Hz~18kHz

Mic Input Section

(Mic 1~4 In@1kHz,

Preamp Out)

Input Sensitivity/Impedance

–60dBV/600Ω

S/N

Better than 55dB

Frequency Response (±3dB)

120Hz~10kHz

Tone Control

(Bass:100Hz,Treble:10kHz)

±12dB

Phantom Power

+24VDC

Line Input Section

(Line 1~2 In@1kHz,

Preamp Out)

Input Sensitivity/Impedance

–30dBV/10kΩ

S/N

Better than 65dB

Frequency Response (±3dB)

80Hz~15kHz

Tone Control

(Bass:100Hz,Treble:10kHz)

±12dB

Remote Amp Section

(Remote In@1kHz,

Preamp Out)

Mic Input Sensitivity/Impedance

–60dBV/600Ω

S/N

Better than 55dB

Frequency Response (±3dB)

120Hz~10kHz

Tel In Section

(Tel In@1kHz,

Preamp Out)

Input Sensitivity/Impedance

0.3V/600Ω(USA/Canada)

0.775V/600Ω(EC & Associated)

S/N

Better than 65dB

Frequency Response (±3dB)

330Hz~3kHz

Pre Amp Out(Mic 1~4, Line 1~2, Tel In, Remote In)

0dBV/600Ω

T.H.D

Less than 0.5%

Record Out

–10dBV/3kΩ

Operating Temperature

–10°C~40°C

Power Source

100–120VAC or 220–240VAC; 50/60Hz, 24VDC

Power Consumption (1/8 POWER)

180W

320W

Weight

17kg/37.6lb

19kg/42lb

Dimensions

482(W) x 132(H) x 398(D)mm

19(W) x 5.2(H) x 15.7(D)in

※ Specifications and design subject to change without notice.

Weight7.00 kg10.00 kg0.50 kg10.00 kg13.00 kg17.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 7.00 kg
Weight 10.00 kg
Weight 0.50 kg
Weight 10.00 kg
Weight 13.00 kg
Weight 17.00 kg