| Content |
Product Description
The FBT PSR 212m floor monitor features 13 ply Baltic Birch plywood construction cabinetry in a low profile design, internally braced to
prevent undesirable cabinet vibrations. A rugged touring grade scratch resistant black paint finish protects the cabinetsʼ exterior.
A heavy duty perforated steel grille provides protection for the coaxial speaker. An integrated carrying handle is built into the cabinet
providing easy transportability.
The FBT PSR 212 is of two-way bass reflex design incorporating a Italian manufactured 12” B&C Custom coaxial woofer with a 3” voice coil
with aluminum windings and a concentric 2.6” B&C titanium compression driver with a 1.4” exit. The PSR 212m floor monitors dispersion
factor is 80° x 80°. The internal crossover is constructed with a military grade dual flooded fiberglass circuit board utilizing military spec
components including metallized polyester condensers, and large diameter choke coils. All crossover components are embedded in a
special resin to ensure total imperviousness to vibrations in operation and shock transmitted by mechanical impacts when transporting. The
internal crossover allows either full range or bi amplified operation by means of a jumper located internally on the crossover unit on the
underside of the rear control panel input plate. This type of selectable crossover frequency design provides against accidental crossover
settings when either full range or bi amplified operation is desired. When used in full range operation, the internal crossover frequency is
preset at 1.6khz (24dB oct). Recommended amplifier power output when used in full range operation is 600w RMS total and 600 w RMS LF,
160 w RMS HF when operated in bi amp mode. A sensitivity factor of 99 dB applies in full range mode and 99 dB LF, 108 dB HF in bi amp
mode. Frequency response is an ample 60Hz – 18kHz.
The rear facing input panel provides 2 Neutrik® Speakon NL-4 female connectors. FBTʼs S.T.E.P.® (soft trip electronic protection) circuitry
ensures correct speaker operation even in overdriven conditions.
Specifications
System Type: 2 way Floor Monitor
Dispersion: 80° H x 80° V
Components: 12” B&C Coaxial woofer with concentric HF driver
Protection: FBT S.T.E.P.® Protection circuitry
Frequency Response: 60Hz - 18kHz
Inputs/Outputs: 2- Neutrik® Speakon
Nominal Impedance: 8 ohms
Cabinet Design: Asymmetrical
Power Handling: 600w RMS, 1200w Program (full range)
Enclosure Material: 13 ply Baltic Birch plywood
Sensitivity: 99 dB @ 1 watt, 1 meter (full range)
Dimensions: 21”w x 14.60” h x 20.80” d
Maximum SPL: 129dB (full range)
Net Weight: 55 lbs.
Internal Crossover Frequency: 1.6 kHz
Shipping Weight: 62 lbs.
|
Chassis Size 304.8 mm (12“)
Color Black
Directivity Index 11.6 dB
Input Connections 2 four-pin Speakon
Speaker Type Two-Way
Speaker Type Wedges
Frequency Response (-3 dB) 65 - 16000 Hz
Frequency Response (-10 dB) 50 - 20000 Hz
Internal Crossover No
Sensitivity 1 W/1 m 98 dB
Max. SPL/1m (calc) 129 dB
Coverage
(Nominal -6 dB) H° 55 °
Coverage
(Nominal -6 dB) V° 80 °
Rotatable Horn No
LF Transducer DL12ST
Low Frequency Power Handling (Continuous/Program/Peak) 300 Watts
High Frequency Power Handling (Continuous/Program/Peak) 75 Watts
LF Nominal Impedance 8 Ω
HF Transducer ND6-16
HF Nominal Impedance 16 Ω
Minimum Impedance 8.2/10.5 Ω
Enclosure Material 13-ply birch plywood with Futura
Flying No
Outdoor No
Height 584 mm (22.99“)
Width 449 mm (17.68“)
Depth 313 mm (12.32“)
Weight Net 21.9 kg (48.28 lbs) |
JBL VRX915M 15'' 2-way 800W RMS Stage Monitor
Key Features :
Compact and low-profile for minimal obstruction of audience sightlines
50 x 90 nominal coverage
Bi-amplified or full-range passive operation
Differential Drive woofer with neodymium magnet for high power capacity and very light weight
4" (voice coil) diameter compression driver with neodymium magnet
Specifications:
|
Frequency Range
|
:
|
60 Hz - 20 kHz
| |
Frequency Response
|
:
|
70 Hz - 20 kHz
| |
Coverage Pattern
|
:
|
50 x 90 nominal
| |
Crossover Modes
|
:
|
Passive / Bi-amp
| |
Crossover Frequency
|
:
|
1.1 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive Full-Range 800 W / 1600 W / 3200W, 2 hrs1 Passive Full-Range 600 W / 1200 W / 2400W, 100 hrs
| |
System Maximum SPL
|
:
|
127 dB SPL continuous (133 dB SPL peak)
| |
System Sensitivity (1w @ 1m
|
:
|
98 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2265H 380 mm (15 in) Differential Drive?? woofer 8 Ohms
| |
HF Driver
|
|
1 x JBL 2452H, 100 mm (4.0 inch) diameter voice coil, 38 mm (1.5 inch) exit, neodymium magnet compression driver 8 Ohms
| |
Nominal Impedance
|
:
|
8 ohms
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
Symmetrical stage monitor, 15/18 mm, plywood
| |
Finish
|
:
|
Black DuraFlex finish
| |
Grille
|
:
|
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing
| |
Input Connectors
|
:
|
Neutrik Speakon NL-4 (x2), one on each end
| |
Dimensions (H x W x D)
|
:
|
629 mm x 432 mm x 324 mm (375 mm stage height) 24.75 in x 17 in x 12.75 in (14.75" stage height)
| |
Net Weight
|
:
|
21 kg (46.0 lb)
|
|
Description
The MON 15 A G3 is part of an entirely newly developed family of powered stage monitors for high performance. The MON G3 Series incorporates the advanced technology and premium materials found in high-end monitors typically rented by professionals, making this quality available to everyone. These include, for example, advanced coaxial loudspeakers with integrated 50° x 90° CD horn, which ensure the acoustic ideal of a true point source and thus outstanding audio characteristics even at short listening distances. Besides this, the series offers a high-level of robustness, a comprehensive set of features and the elegant LD Systems design.
A maximum sound pressure level of 129 dB and superior bass reproduction make the MON 15 A G3 the best choice for loud band stages, as a drum fill or for stand-alone use as a compact front PA without an additional subwoofer. For a 15" stage monitor, it is unusually compact and elegant, so despite its impressive performance data, it blends harmoniously into the stage set.
Both the signal (XLR/jack combo) and the power connection (PowerCON compatible) can be looped through. This allows for elegant, tidy cabling in multi-monitor set-ups or for distributed sound reinforcement.
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 129 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 15" woofer with 3" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front griller
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
122 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
129 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
58 - 18000 HZ
Frequency response (-10 dB)
48 - 20000 Hz
Crossover frequency
1300 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
75 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Description:
Following in the tradition of the original 12MX, the 10MX offers most of the same features but in a more compact enclosure. Due to its unique cabinet geometry, the 10MX is at home either on the stage as an extremely low profile stage monitor, or as a main, medium duty, front of house speaker. Adamson's Acoustic Waveguide is employed in the 10MX and its integral pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. The 10MX carries on the tradition of multi-purpose versatility.
Applications:
Extremely Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate
Features:
Unique Cabinet Geometry
Adamson AX10 Low Frequency Driver
1" High Frequency Compression Driver
Passive Operation
Adamson Acoustic Waveguide
Durable Dual Component Finish
Roadworthy Construction
Weight: 22 |
Features : Specifications :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
Twelve M10 suspension points.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Frequency Range ( –10 dB) : 41 Hz-20 kHz
Frequency Response (± 3 dB) : 55 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 96 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 131 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 721 mm x 436 mm x 329 mm
(28.4" x 17.2" x 13.0“)
Net Weight : 26 kg (58 lbs
|
Reviews
There are no reviews yet.