FBT PSR-212M 600W RMS PASSIVE FLOOR MONITOR

Discontinued

1,058.53 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Product Description The FBT PSR 212m floor monitor features 13 ply Baltic Birch plywood construction cabinetry in a low profile design, internally braced to prevent undesirable cabinet vibrations. A rugged touring grade scratch resistant black paint finish protects the cabinetsʼ exterior. A heavy duty perforated steel grille provides protection for the coaxial speaker. An integrated […]

 

Read more

Product Description
The FBT PSR 212m floor monitor features 13 ply Baltic Birch plywood construction cabinetry in a low profile design, internally braced to
prevent undesirable cabinet vibrations. A rugged touring grade scratch resistant black paint finish protects the cabinetsʼ exterior.
A heavy duty perforated steel grille provides protection for the coaxial speaker. An integrated carrying handle is built into the cabinet
providing easy transportability.
The FBT PSR 212 is of two-way bass reflex design incorporating a Italian manufactured 12” B&C Custom coaxial woofer with a 3” voice coil
with aluminum windings and a concentric 2.6” B&C titanium compression driver with a 1.4” exit. The PSR 212m floor monitors dispersion
factor is 80° x 80°. The internal crossover is constructed with a military grade dual flooded fiberglass circuit board utilizing military spec
components including metallized polyester condensers, and large diameter choke coils. All crossover components are embedded in a
special resin to ensure total imperviousness to vibrations in operation and shock transmitted by mechanical impacts when transporting. The
internal crossover allows either full range or bi amplified operation by means of a jumper located internally on the crossover unit on the
underside of the rear control panel input plate. This type of selectable crossover frequency design provides against accidental crossover
settings when either full range or bi amplified operation is desired. When used in full range operation, the internal crossover frequency is
preset at 1.6khz (24dB oct). Recommended amplifier power output when used in full range operation is 600w RMS total and 600 w RMS LF,
160 w RMS HF when operated in bi amp mode. A sensitivity factor of 99 dB applies in full range mode and 99 dB LF, 108 dB HF in bi amp
mode. Frequency response is an ample 60Hz – 18kHz.
The rear facing input panel provides 2 Neutrik® Speakon NL-4 female connectors. FBTʼs S.T.E.P.® (soft trip electronic protection) circuitry
ensures correct speaker operation even in overdriven conditions.


Specifications
System Type: 2 way Floor Monitor
Dispersion: 80° H x 80° V
Components: 12” B&C Coaxial woofer with concentric HF driver
Protection: FBT S.T.E.P.® Protection circuitry
Frequency Response: 60Hz – 18kHz
Inputs/Outputs: 2- Neutrik® Speakon
Nominal Impedance: 8 ohms
Cabinet Design: Asymmetrical
Power Handling: 600w RMS, 1200w Program (full range)
Enclosure Material: 13 ply Baltic Birch plywood
Sensitivity: 99 dB @ 1 watt, 1 meter (full range)
Dimensions: 21”w x 14.60” h x 20.80” d
Maximum SPL: 129dB (full range)
Net Weight: 55 lbs.
Internal Crossover Frequency: 1.6 kHz
Shipping Weight: 62 lbs.

Weight 25.00 kg

Reviews

There are no reviews yet.

Be the first to review “FBT PSR-212M 600W RMS PASSIVE FLOOR MONITOR”

Your email address will not be published. Required fields are marked *

Quick Comparison

FBT PSR-212M 600W RMS PASSIVE FLOOR MONITOR removeHK AUDIO PREMIUM PRO 15X 2 WAY MONITOR 400W removeLD Systems ICOA 15 15" PASSIVE LOUDSPEAKER COAXIAL 2 WAY 250Wrms 8Ohm 1000w peak removeELECTRO VOICE XW12A 12'' 2 WAY STAGE MONITOR 675W removeELECTRO VOICE XW15A 15'' 2 WAY STAGE MONITOR 675W removeJBL STX815M 2WAY LOUDSPEAKER 15'' 800W remove
NameFBT PSR-212M 600W RMS PASSIVE FLOOR MONITOR removeHK AUDIO PREMIUM PRO 15X 2 WAY MONITOR 400W removeLD Systems ICOA 15 15" PASSIVE LOUDSPEAKER COAXIAL 2 WAY 250Wrms 8Ohm 1000w peak removeELECTRO VOICE XW12A 12'' 2 WAY STAGE MONITOR 675W removeELECTRO VOICE XW15A 15'' 2 WAY STAGE MONITOR 675W removeJBL STX815M 2WAY LOUDSPEAKER 15'' 800W remove
ImageLD Systems ICOA 15 15" PASSIVE LOUDSPEAKER COAXIAL 2 WAY 250Wrms 8Ohm 1000w peak
SKUPSR-212MPRO 15XLDICOA15001964001965STX 815M
Rating
Price1,058.53 incl. GR VAT 545.60 incl. GR VAT 353.39 incl. GR VAT2,082.00 incl. GR VAT2,391.00 incl. GR VAT 1,446.85 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock (can be backordered)

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockAvailable on backorderIn stock (can be backordered)Available on backorderAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • A genuine all-rounder for full-range, satellite and monitor applications as well as fixed installations
  • Passive loudspeaker with 125 dB max. SPL and 1000 W peak power
  • Vertical and horizontal use thanks to coaxial design with rotating, BEM-optimised CD horn (Patent pending)
  • Horn-loaded woofer
  • 36 mm dual tilt stand attachment with 0° and 5° tilt angle, 55° monitor angle with sturdy stand
  • 6 x M10 flying points
  • Shock-resistant front grille for optimal speaker protection
  • Four aluminium grips with ergonomic, rubber surface
  • Extensive range of optionally available accessories for installation and transport
Content

Product Description
The FBT PSR 212m floor monitor features 13 ply Baltic Birch plywood construction cabinetry in a low profile design, internally braced to
prevent undesirable cabinet vibrations. A rugged touring grade scratch resistant black paint finish protects the cabinetsʼ exterior.
A heavy duty perforated steel grille provides protection for the coaxial speaker. An integrated carrying handle is built into the cabinet
providing easy transportability.
The FBT PSR 212 is of two-way bass reflex design incorporating a Italian manufactured 12” B&C Custom coaxial woofer with a 3” voice coil
with aluminum windings and a concentric 2.6” B&C titanium compression driver with a 1.4” exit. The PSR 212m floor monitors dispersion
factor is 80° x 80°. The internal crossover is constructed with a military grade dual flooded fiberglass circuit board utilizing military spec
components including metallized polyester condensers, and large diameter choke coils. All crossover components are embedded in a
special resin to ensure total imperviousness to vibrations in operation and shock transmitted by mechanical impacts when transporting. The
internal crossover allows either full range or bi amplified operation by means of a jumper located internally on the crossover unit on the
underside of the rear control panel input plate. This type of selectable crossover frequency design provides against accidental crossover
settings when either full range or bi amplified operation is desired. When used in full range operation, the internal crossover frequency is
preset at 1.6khz (24dB oct). Recommended amplifier power output when used in full range operation is 600w RMS total and 600 w RMS LF,
160 w RMS HF when operated in bi amp mode. A sensitivity factor of 99 dB applies in full range mode and 99 dB LF, 108 dB HF in bi amp
mode. Frequency response is an ample 60Hz – 18kHz.
The rear facing input panel provides 2 Neutrik® Speakon NL-4 female connectors. FBTʼs S.T.E.P.® (soft trip electronic protection) circuitry
ensures correct speaker operation even in overdriven conditions.


Specifications
System Type: 2 way Floor Monitor
Dispersion: 80° H x 80° V
Components: 12” B&C Coaxial woofer with concentric HF driver
Protection: FBT S.T.E.P.® Protection circuitry
Frequency Response: 60Hz - 18kHz
Inputs/Outputs: 2- Neutrik® Speakon
Nominal Impedance: 8 ohms
Cabinet Design: Asymmetrical
Power Handling: 600w RMS, 1200w Program (full range)
Enclosure Material: 13 ply Baltic Birch plywood
Sensitivity: 99 dB @ 1 watt, 1 meter (full range)
Dimensions: 21”w x 14.60” h x 20.80” d
Maximum SPL: 129dB (full range)
Net Weight: 55 lbs.
Internal Crossover Frequency: 1.6 kHz
Shipping Weight: 62 lbs.

Professional Sound Tools for Musicians
 
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.

Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.

Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.

PREMIUM PR:O - PR:O 15 X
 
Description  The multi-talented prodigy in the PREMIUM PR:O family. The
Description  housing shape enables the PR:O 15 X to be used as a main
Description  PA or a monitor speaker.
Power handling capacity  RMS: 400 W
Power handling capacity  Program: 800 W
Frequency response within +/-3dB  60 Hz ? 19 kHz
Frequency response @ -10dB  53 Hz- 19 kHz
Speaker  1x 15?
Impedance  8 Ohm
HF driver  1?
Axial sensitivity 1w/1m half-space  104 dB
Maximum SPL 10% THD half-space  128 dB
Crossover frequency  2 kHz/12 db Octave
Connections  2x Speakon
Mounting collar  DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar  orientation of the speakers towards the audience
Rigging points  side-mounted M8 threaded rigging points for easy installation
Dimensions (WxHxD)  47 cm x 61,5 cm x 44,5 cm
Dimensions (WxHxD)  18 1/2? x 24 1/4? x 17 1/2?
Weight  21.6 kg
Weight  47.52 lbs

This 15" full-range loudspeaker stands out with impressive sound even at low frequencies. As a jack-of-all-trades, the unpowered ICOA 15 speaker by LD Systems and its design with a coaxial design and rotating, BEM-optimised CD horn means it is extremely flexible. The horn-loaded woofer's outstanding bass reproduction makes the ICOA 15 the ideal choice for dance schools, musicians, bands and entertainers. It also allows DJs to play sets without the need for a subwoofer. The speaker also makes a good impression in fixed installations due to its freedom of flexibility. Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. It Delivers a maximum sound pressure level of 125 dB peak and has 1000 Watt peak performance. Thanks to its shock-resistant front grille and ideal 55° tilt angle make the ICOA 15 outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment. Extensive and smart accessories for installation and transport are optionally available. Four aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
Product type PA loudspeaker
Type Passive
Low/mid driver dimensions 15 "
Woofer size 381 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Horn BEM optimized CD Horn
HF driver dimensions 1 "
HF driver size 25.4 mm
HF driver magnet Ferrite
HF driver brand Custom-made
HF driver voice coil 1.4 "
HF driver voice coil 35 mm
Load rating (RMS) 250 W
Dispersion (H x V) 90° x 50°
Peak power 1000 W
Frequency response 48 - 20000 Hz
Crossover frequency 2000 Hz
SPL (1W/1m) 95 dB
Max. SPL 125 dB
Impedance 8 Ohm(s)
Loudspeaker inputs 1
Speaker input connections Speakon compatible
Loudspeaker outputs 1
Speaker output connections Speakon compatible
Cabinet material Polypropylene
Cabinet construction Bass Reflex
Mounting 36mm flange (0°, 5°), 6 x M10 flying points
Monitor angle 55 °
Width 416 mm
Height 695 mm
Depth 415 mm
Weight 24,7 kg
 

Chassis Size    304.8 mm (12“)
Color    Black
Directivity Index    11.6 dB
Input Connections    2 four-pin Speakon
Speaker Type    Two-Way
Speaker Type    Wedges
Frequency Response (-3 dB)    65 - 16000 Hz
Frequency Response (-10 dB)    50 - 20000 Hz
Internal Crossover    No
Sensitivity 1 W/1 m    98 dB
Max. SPL/1m (calc)    129 dB
Coverage
(Nominal -6 dB) H°    55 °
Coverage
(Nominal -6 dB) V°    80 °
Rotatable Horn    No
LF Transducer    DL12ST
Low Frequency Power Handling (Continuous/Program/Peak)    300 Watts
High Frequency Power Handling (Continuous/Program/Peak)    75 Watts
LF Nominal Impedance    8 Ω
HF Transducer    ND6-16
HF Nominal Impedance    16 Ω
Minimum Impedance    8.2/10.5 Ω
Enclosure Material    13-ply birch plywood with Futura
Flying    No
Outdoor    No
Height    584 mm (22.99“)
Width    449 mm (17.68“)
Depth    313 mm (12.32“)
Weight Net    21.9 kg (48.28 lbs)

Chassis Size    381 mm (15“)
Color    Black
Directivity Index    11.6 dB
Input Connections    2 four-pin Speakon
Speaker Type    Two-Way
Speaker Type    Wedges
Speaker Type    Fullrange
Frequency Response (-3 dB)    55 - 18000 Hz
Frequency Response (-10 dB)    46 - 20000 Hz
Internal Crossover    No
Sensitivity 1 W/1 m    99 dB
Max. SPL/1m (calc)    133 dB
Coverage
(Nominal -6 dB) H°    55 °
Coverage
(Nominal -6 dB) V°    80 °
Rotatable Horn    No
LF Transducer    EVX155
Low Frequency Power Handling (Continuous/Program/Peak)    600 Watts
High Frequency Power Handling (Continuous/Program/Peak)    75 Watts
LF Nominal Impedance    8 Ω
HF Transducer    ND6-16
HF Nominal Impedance    16 Ω
Minimum Impedance    7.2/14.3 Ω
Enclosure Material    13-ply birch plywood with Futura
Flying    No
Outdoor    No
Height    644 mm (25.35“)
Width    457 mm (17.99“)
Depth    340 mm (13.39“)
Weight Net    28.4 kg (62.61 lbs)

Features :           Specifications :

    Compact and low-profile for minimal obstruction of audience sight-lines.

    70°x 70° nominal coverage.

    Bi-amplified or full-range passive operation.

    Pole socket for applications requiring pole or tripod mounting.

    Twelve M10 suspension points.

    High power handling, low distortion Vented Gap Cooling™ LF driver.

    3 in. (diaphragm) neodymium magnet compression driver.

    Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.

    14-Gauge steel grille lined with acoustically transparent cloth.

         
Frequency Range ( –10 dB)       :       41 Hz-20 kHz

Frequency Response (± 3 dB)       :       55 Hz-20 kHz

Coverage Pattern       :       70˚ × 70˚ nominal

Sensitivity (1W/1m)       :       96 dB

Power Rating
(Cont. Pink Noise/Program/Peak)       :       800 W / 1600 W / 3200 W
(Continuous/Program/Peak)

Rated Maximum SPL       :       131 dB SPL Peak

Nominal Impedance       :       8Ω

Input Connectors       :       Two NL4

Operational Modes       :       Full Range/Bi-Amp

Dimensions (H x W x D)       :       721 mm x 436 mm x 329 mm
(28.4" x 17.2" x 13.0“)

Net Weight       :       26 kg (58 lbs

Weight25.00 kg21.60 kg25.00 kg21.90 kg28.40 kg26.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 25.00 kg
Weight 21.60 kg
Weight 25.00 kg
Weight 21.90 kg
Weight 28.40 kg
Weight 26.00 kg