| Content |
PRICE WITHOUT V.A.T.
DBX 2231 Dual 31-Band Graphic Equalizer with noise reduction-2nd Hand-
It's amazing. One little button. It has so much effect. The Type III? Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box. We started out to build the finest EQ's possible, boxes with the heritage and performance to rival our famous 30 Series EQ's. And to no one's surprise they came out awfully darn good. (Ask to see the Audio Precision plots compared to the competition.) But then, Roger (our chief engineer, a nice guy, as far as engineers go) got the crazy idea of putting this new noise reduction stuff in the box. We listened to it and were amazed. The EQ's sounded great without it but with it the performance was nothing short of incredible. Check it out yourself and see.
But hey, Roger wasn't about to stop there. PeakPlus? Limiter. Who knows more about limiting than the folks at dbx?; nobody... that's who. So when the guys were developing this new series of EQ's they wanted something that would be unique to these EQ's. That's when Roger got another one of his bright ideas and said "I bet they'll work a lot better if there's a cool limiter built in." Next thing you know, all the guys are in the studio amazed at the new limiter Roger had designed specially for the 20 Series. Once again, hearing is believing... With a threshold range of 0 to +20dbu, the PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.
20 Series EQ's. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III? Noise Reduction. Check out the dbx? 20 Series graphic EQ's at your pro audio outfitter. You'll see, with the 20 Series EQ's you get both MORE!!!
SPECIFICATIONS:
|
INPUT
| |
Connectors:
|
1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
| |
Type:
|
Electronically balanced/unbalanced, RF filtered
| |
Impedance:
|
Balanced 40k ohm, unbalanced 20k ohm
| |
Max Input Level:
|
>+21dBu balanced or unbalanced
| |
CMRR:
|
>40dB, typically >55dB at 1kHz
| |
OUTPUTS
| |
Connectors:
|
1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
| |
Type:
|
Impedance-balanaced/unbalanced, RF filtered
| |
Impedance:
|
Balanced 200 ohm, unbalanced 100 ohm
| |
Max Output Level:
|
>+21dBu balanced/unbalanced into 2k or greater
>+20dBm balanced/unbalanced (into 600)
| |
SYSTEM PERFORMANCE
| |
Bandwidth:
|
20Hz to 20kHz, +/-0.5dB
| |
Frequency Response:
|
50kHz, +0.5/-3dB
| |
Noise Reduction In:
|
(+/-6 and +/-12dB range):
| |
Signal-to-Noise:
|
>102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
| |
Dynamic Range:
|
>120dB, unweighted
| |
Noise Reduction Out:
|
(+/-6dB range):
| |
Signal-to-Noise:
|
>94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
| |
Dynamic Range:
|
>112dB, unweighted
| |
Noise Reduction Out:
|
(+/-12dB range):
| |
Signal-to-Noise:
|
>90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
| |
Dynamic Range:
|
>108dB, unweighted
| |
THD + Noise:
|
| | PRICE WITHOUT V.A.T.
BSS Opal FCS-966 Constant Q Graphic Eq
Graphic equalisers are found in just about every sound application, from room contouring to feedback control and general audio sweetening.
Traditionally, much general eq'ing takes place on the faders alone, but this restricts the use of the faders at each end of the scale for further precision eq work. So we provided the Opal FCS-966 with separate LF and HF contour filters which can change an overall sound balance without disturbing a detailed room or loudspeaker response.
These filters are very musical gentle boost and cut shelving filters which can be used to add (or remove) room effects that change with temperature, audience numbers or humidity.
All these effects can be easily made without disturbing the critical fader settings already made.
Constant Q Filters
The modern generation of graphic eq's
uses the Constant Q topology, pioneered by BSS Audio, which means that the filter width is constant whatever the fader gain setting.
Compared to the earlier 'gyrator' style of filters, Constant Q filters provide a smoother and more predictable interaction between adjacent faders and the resulting eq curve more closely resembles the actual fader positions.
More Gain Control Per Filter
Each eq fader has +/-15dB of adjustable gain, more than many competitive graphic eq's. The faders are long-throw 45mm types for precision control.
High Pass Filter
Also provided on the FCS-966 is a sweepable high-pass filter which can be used very effectively to restrict the low-energy output for better amplifier and loudspeaker performance. Stage monitors also benefit from the application of a high-pass filter to remove bass signals e.g. from vocal-only wedges.
Metering
BSS Audio believes in providing engineers with information, and the FCS-966's 8-segment led meter shows output level and warns of signal clipping within the eq. When the unit is switched to bypass, the meter will read the input level, allowing accurate matching of the 'dry' and equalised signals using the gain control.
Centre Bypass
When any eq fader is in its centre detent position, the filter is automatically bypassed, for optimum performance.
Input/Outputs
All the inputs and outputs of the FCS-966 are electronically balanced, with optional transformer balancing. To make installation of the FCS-966 easier, we've provided three differerent interface connectors: XLR-type, 1/4" TRS jack and Phoenix/Combicon screw terminals.
Relay Bypass
The EQ IN buttons switch the EQ path
into circuit. When switched out, or power fails, a high-quality relay switches the input signal directly to the output connectors.
Control Descriptions
Faders
30 EQ filter faders on ISO centres, each with nominal +/-15dB of gain. Positive centre-detent on 45mm long-throw precision faders.
HP Filter
Sweepable high pass filter, frequency adjustable from OUT (flat) up to 250Hz.
LF Contour
Smooth shelving filter, +/-6dB of gain at 50Hz
HF Contour
Smooth shelving filter, +/-6dB of gain at 14kHz.
GAIN
Used for overall unity gain adjustment. Adjustable from - infinity to +10dB.
CLIP
Triple-point clip detector that indicates red when the internal signal is clipping at any one of three critical points.
LED Meter
Shows output signal level (input signal when eq is bypassed) from -24dBu to +18dBu in 8 steps. |
PRICE DOES NOT INCLUDE VAT
Art + Science = Magic
The Engineering Group at TC Electronic were given carte blanche to create the optimal studio
signal processor. Being musicians and studio engineers themselves, they know what is important
and have a feel for what you are looking for. Working on the borderline between art and science,
they created the M2000.
Designed for the artist within you, you will create magic when using the M2000.
Main features
Magic
The M2000 provides you with a broad palette of high quality effects enabling you to
create magical effects. The true dual engine configuration allows you to run two full-
blown effects simultaneously, i.e. on two individual effects sends. The effects have
been developed for optimal sonic quality with no compromises made. This has only
been possible because our engineers succeeded in combining the latest technology
with TC's powerful DARC? chip.
Ultimate User-Interface
The user-friendly TC feature, the Recall Wizard, instantly finds the preset that suits
your need in any situation. You simply enter your preferences, such as gentle reverb
for vocal, or extra pitch for guitar and the Wizard serves you a short list of presets ready
to compare and use.
Uncompromising Effects
The M2000 gives you access to a stunning array of Reverb, Pitch-shifting, Delays, Chorus,
Dynamics etc. Among the included reverbs you?ll find the unique Co-efficient Optimized
Room Emulator or C.O.R.E. Reverb? based upon TC?s famous reverberation Technology.
Another unique feature in the M2000 is the Dynamic Morphing. This function enables you to
apply e.g. Chorus to a vocal at low volume levels, while the same effect is being morphed into
flanging at high levels giving the signal a totally new dynamic dimension.
The Sensation
The M2000 is fully prepared for the digital age with Digital I/O connectors, S/PDIF and the
professional format AES/EBU. However, specifications never tell the whole story. What really
matters is how your final mix sounds. This is where TC?s long experience and know-how in high-end
studio signal processing becomes important.
More Features
250 factory presets, including Delay, Reverb, Ambience, Pitch, Dynamics, EQ + more.
True stereo Twin Engine processing with six different routings available.
Dynamic Morphing? and Patch Glide with adjustable glide times.
20bit Analog Conversion (105dB Dynamic Range A to D): 10Hz-20Khz bandwidth
AES/EBU (24bit) and SPDIF (24bit) digital I/O. + 16bit dithering tool for DAT output.
Wizard Help menus assist user in preset choices on an easy to read scrolling bit-mapped display.
Tap tempo and MIDI tempo Delay presets. Tap tempo button and footswitch jack.
Both 128 user and 128 Combi-user presets + 4 snapshot memories.
Universal auto-switching power supply (100-240V.)
| Outline FSC1 Processor-2nd Hand-
FEATURING
Customized functions
FOC1 dedicated controller for Flyone loudspeaker system
SC1 dedicated controller for Spectra loudspeaker system
NC1 dedicated controller for Integra loudspeaker system
MEC1 dedicated controller for Media loudspeaker system
FSC1 dedicated controller for Formula Stack louds. System
TFC1 dedicated controller tor Topfly loudspeaker system
MRC1 dedicated controller for Road loudspeaker system
TLC1 : dedicated controller for Tripla loudspeaker system
Dynamically invariant filter transfer function
RMS limiters on each output
Subwoofer dedicated output
Adjustable band gain
Polarity inversion switches
Muting switches
DESCRIPTION
Designed with the most advanced audio technologies the Outline Controller Series are true professional active dedicated control units for some Outline loudspeaker system models. Developed to meet the most demanding requirements of the sound reinforcement applications, the Outline Controller Series provides nonstop operation with absolute stability and reliability. Only IEC approved components and parts are used in these active controllers and they are manufactured to satisfy and to be in according with safety objects stated for “electrical device” working within the limits of pertinent CE, European Community directive.
Based on a plugin filter card design, the Outline Controller Series allows the operation to those Outline loudspeaker systems that needs this kind of external assistance to perform of its best.
The Outline FOC1, SC1, MEC1, NC1 two ways with subbass output controllers, are designed for the Outline Flyone, Spectra, Media, Integra loudspeaker system.
The Outline FSC1, TFC1, MRC1, TLC1, three ways with subbass output are designed for the Outline FormulaStack, TopFly, RoadSystem, Tripla loudspeaker system.
All models have customized band splitting, filter transfer function and signal time alignment tailored to the loudspeaker system for which are designed.
All models have dynamic control with loudspeaker protection purposes, obtained with RMS limiters with adjustable threshold that are available on each output.
All models have a very low frequency output that can be used to drive the Outline Bass Series or Sub Series low frequency units.
All models have level control on each output, polarity inverters, muting switches, subsonic filters, RMS limiters and active balanced input and outputs with XLR connectors. Perspex security cover are included.
Dimensions of all models are 483mm width, 44mm height, 210mm depth.
SPECIFICATIONS
Product name:
Outline FOCI, SC1, NCI, MEC1, FSC1, TFC1, MRC1, TLC1
Product type: Dedicated active controller
Channels: 1
Ways:
FOCI: 2 ways + subwoofer
SC1: 2 ways + subwoofer
NCI: 2 ways + subwoofer
MEC1 : 2 ways + subwoofer
FSC1: 3 ways + subwoofer
TFC1: 3 ways + subwoofer
MRC1: 3 ways + subwoofer
TLC1: 3 ways + subwoofer
Crossover frequencies: fixed customized
Filter slope: fixed customized
Filter transfer function: fixed customized
Input impedance: 20 kΩ balanced
Frequency response: 20-20000 Hz ± 0.3 dB
Output impedance: 600Ω balanced
Total harmonic distortion (THD): <0.01%
Total intermodulation distortion (SMPTE): <0.01%
Signal to noise ratio: > 100dBA
Subsonic filter: Butterworth 18 Hz, 18 dB octave
Controls:
Front panel: Power on, output level, polarity, output mute, limiting threshold, input gain adjust
Rear panel switches: Balanced/unbalanced input and outputs, limiters on
Display:
Front panel: Power on, signal present, limiting action, input overloading
Connectors: XLR, Pin 1 ground, Pin 2 hot, Pin 3 cold
Power supply: AC from 100 -to 240V/50-60 Hz
Power consumption: 20W
Dimensions and net weight: Front panel Standard EIA 19" 1 U
483mm width, 44mm height, 210 mm depth, all models 3.3 net weight.
Dimensions volume and gross weight: all models, 55cm width, 8cm height, 30cm depth, volume 0.01 m3, 4.3 gross weight.
|
PRICE WITHOUT V.A.T.
The BSS FDS-334T is a 2 input / 4 output loudspeaker management system with
Features such as : Fast-access edit input and output, Each output is assignable
to either input or to sum of inputs, Navipad menu navigation, Bright blue text display,
Crossover, assignable PEQ mid-filter limiters, polarity and delay on each output,
Assignable parametric EQ and delay on each input, LED bargraphs on every input
and output, 6, 12, 18, 24 or 48dB per octave Butterworth, Bessel or Linkwitz crossover
alignments, 60 user programs, Lockable front panel mutes and level trims and MIDI control.
|
PRICE DOES NOT INCLUDE VAT
Gepco Passive D.I. Box-2nd Hand-
|
Reviews
There are no reviews yet.