Content |
Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8128):
Component: 200 mm (8 in) Full-Range
Frequency Range (-10 dB): 50 Hz – 16 kHz
Coverage: 90° conical
Sensitivity (2.83V@ 1m): 97 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 25 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 287 mm (11.3 in) diameter round baffle x 104 mm (4.1 in)
depth from back of baffle
Cutout Dimension: 260 mm diameter (10.1 in)
Net Weight: 1.4 kg (3.0 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8128C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums
|
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20 - 100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 8-15/16“(22.70cm)
Cut-out Diameter 7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-5/8" (6.67cm)
Overall Depth 3-1/8" (7.94cm)
Shipping/Other
Shipped As each
Product Weight 2.55 lbs. (1.16kgs) each
Total Shipping Weight 3.00 lbs. (1.36kgs)
Speaker Warranty Lifetime Warranty
|
Outer Flange Dimensions | Metric :15-1/2” W x 15-1/2” H | 39.4 x 39.4 cm
Cut Out Dimensions | Metric :14-3/8” W x 14-3/8” H | 36.5 x .36.5 cm
Depth from Flange | Metric :5-7/8” | 14.9 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 5-1/4" cast-basket bass/midrange drivers pressure coupled to two 6-1/2” bass radiators
Frequency Response :22 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :
Recommended Associated Amplifier Power :10 – 250 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Weight | Metric :22 lbs | 10 kg
Warranty :5 Years
|
In-Ceiling Audiophile Magic RC60i's round profile looks just like a lighting fixture so it will blend into your ceiling without calling attention to itself. But they sound sooooo much better than your typical in-ceiling speakers that resemble a watering spout. RC60i Features: - Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets.
- RCi speakers utilize the "virtual enclosure" of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.
- Lightweight and stiff blue polymer cones deliver excellent damping and bass response.
- Durable, computer-modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances for a lifetime of reliable sound.
- Aimable swivel tweeters for greater accuracy and more realistic imaging. (All models except RC6s.).
- Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms or even under eaves of an enclosed porch. (RCi series are not suitable for exposed outdoor use).
- RCi speakers have paintable grilles and practically disappear into any room.
- RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
Dimensions - Cut-Out Diameter | 7 5/8 (19.37cm) " | Dimensions - Mounting Depth (includes 1/2 drywall)“ | 2 3/8 (6.03cm) " | Dimensions - Overall Depth | 2 7/8 (7.30cm) " | Dimensions - Overall Diameter | 9 (22.86cm) " | Dimensions - Pre-Construction Bracket | PB 60 | Driver Complement Mid / Woofer - Diameter | 6 1/2 (16.51cm) " | Driver Complement Mid / Woofer - Quantity | 1 | Driver Complement Mid / Woofer - Type | Dynamic Balance driver with mineral-filled polymer cone and rubber surround | Driver Complement Tweeter - Diameter | 3/4 (1.91cm) " | Driver Complement Tweeter - Quantity | 1 | Driver Complement Tweeter - Type | Dynamic Balance tweeter with metalized soft dome in ball-and-socket swivel mount | Electrical - Efficiency | 89 dB | Electrical - Inputs | Spring-loaded clips | Electrical - Lower -3dB Limit | 60 Hz | Electrical - Nominal Impedance | 8 ohms | Electrical - Recommended Amplifier Power | 20 - 100 watts per channel | Electrical - Total Frequency Response | 40Hz - 20kHz | Electrical - Upper -3dB Limit | 20 kHz | Shipping - Total Shipping Weight | 6 pounds | Shipping - Unit of Measure | pair | Warranty - Speaker Warranty | Lifetime |
|
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-3/8” | 11.11 cm
Driver Complement :One 1" pure aluminum dome tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :30 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :4.5 lbs | 2.0 kg
Warranty :5 Years |
Reviews
There are no reviews yet.