Content |
The waveguide surrounding the tweeter (high frequency driver) on all Radiance models features the DXT® Lens to match the way the high frequencies are dispersed into the room environment to that of the mid/bass woofer. The result is a far more natural integration than has previously been possible in a conventional cone speaker, both between the drivers and in the listening room itself.
Aluminium Drivers - This latest iteration of our famed Aluminium cone is more advanced than ever, featuring Pure-Piston™ performance (the cone retains its shape even at full excursion, meaning lower colouration to the sound). With dual-wound Aluminium voice-coils for even greater control, power-handling and heat dissipation - the result is simply less distortion, regardless of volume. |
Driver Complements
Mid/Woofer 2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Midrange
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31kHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 90 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Mounting Options keyhole slot; one .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclsoure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 4.70 lbs. (2.13kgs)
Shipping unit: each
Total Shipping Weight 5.50 lbs. (2.49kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
System Format: 3 Way Frequency Response: 40 Hz - 60 kHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 113.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 100 - 200 W Bass Alignment: Sealed Cabinet Crossover Frequency: L.F - M.F: 800 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment: 2 x 6.5" RST bass/mid-range driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 254 x 581 x 333 mm (10 x 22 7/8 x 13 1/8 inch) Weight (each) Excluding stands: 18.9 Kg (41.6lbs) AVAILABLE IN SIX COLOR FINISHES
|
Frequency Response: 45Hz- 100kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 112.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 60 - 200 W Bass Alignment: Rear Ported HiVe II Technology Mid / H.F Crossover Frequency: 1800 Hz Bass Low Pass Crossover Frequency: 250 Hz Drive Unit Complement: 2 x 6 1/2" RDT bass/mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand: Width: 583mm (22 15/16 inches) Height: 225mm (8 7/8 inches) Depth: 291.2mm (11 7/16 inches) Stand Dimensions: Width: 610mm (24 inches) Height: 335mm (13 13/16 inches) Depth 463mm (18 1/4 inches) Weight: 19 Kg (41.8lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
| Frequency Response +/- 3dB: 50Hz - 35KHz
Sensitivity (1W@1M): 90dB
Driver Compliment: 2 x 140mm (5 1/2“) C-CAM® mid/bass driver with RST® technology.
1 x 25mm (1“) C-CAM® gold dome tweeter.
Nominal Impedance: 8 ohms
Maximum SPL (each): 116.8 dBA
Recommended Amplifier Requirements (RMS): 50 - 200W
Bass Alignment: Bass reflex - twin front mounted Dual HiVE®II ports
Power Handling (RMS): 200W
Crossover Frequency: 600Hz & 3.0kHz
External Dimensions:
(H x W x D) 610 x 140 x 100 mm
24 x 5 1/2 x 3 15/16 inch
Weight (Individual): 6.85kg (15 1/8lbs)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
2 x 6 ½ ¨ Polymer Composite Cone
with Rubber Surround
1 x 1¨Silk Polymer Dome Tweeter
Amplifier Power 20-200 W/ch
Impedance 8 Ohms
Sensitivity 90dB
Dimensions (cm) 19 x 60 x 35
|
Reviews
There are no reviews yet.