ADAM S6X Active Studio Monitor 500W

18,800.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
PRICE PER UNIT   ΤΙΜΗ ΤΕΜΑΧΙΟΥ Main Monitors: S6X & S7A Mk2 The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAMʼs main […]

 

Read more

PRICE PER UNIT

 

ΤΙΜΗ ΤΕΜΑΧΙΟΥ

Main Monitors: S6X & S7A Mk2

The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive
concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAMʼs main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means superior imaging and better localization, facilitating the best possible transportability of mixes across the widest range of playback systems.

Advanced DʽAppolito-array

The arrangement of the seven discrete drivers facilitates a gradual transition of the chassis dimensions. One of the most important aspects of these monitorʼs new approach is the horizontal symmetry of the drivers, which could be referred to as advanced D´Appolito array. If the drivers are filtered properly there are – besides the dispersion characteristics mentioned previously – two more advantageous results:

  • There is an absence of any sudden change in directivity with frequency, leading to harmonic dispersion behavior throughout the audio band. The absence of sudden changes in directivity is not visible in a frequency plot, but clearly audible – especially with a full range of materials, from single complex sources such as the human voice to the wide sonic palette of large orchestras.
  • The dynamic capabilities of the monitor are distributed over the audio band more equally, and louder recording or mixdown sessions with SPL´s of 120dB are handled without offending the ear.

Impulse Coupling

In order to get a precise and undistorted reproduction, all drive units are mounted on an ultra stiff Aluminum honeycomb plate (=IC).

Amplifiers

Both the S6X and the S7A Mk2 ADAM use the new generation of switching amps and power supplies (=PWM).

These are combined in an extremely powerful (1000 and 1500W rms respectively) yet cool amplifier assembly. Together with the built in overload protection circuits these amplifiers will run reliably and at constant safe operating temperatures not possible with conventional designs.

The amplifiers are of extremely low output impedance, leading to a damping factor >4.000, enabling them to strictly control the motion of the drive units.

The S6X: accuracy and power

The S6X is one of the most ambitious studio monitors available today. They can be found in some of the highest profile studios in the industry, from elite private studios to world class jazz, from rock and orchestral tracking and mixing facilities to high powered hip hop production rooms. The concept of the horizontal symmetry of the drivers is greatly affected by the generous proportions of the larger diaphragms, resulting in both exceptionally flat frequency response and extremely realistic dynamic reproduction across the entire audio spectrum. Numerous controls at the front panel allow detailed adaptations to different acoustic environments.

This main monitor offers very high accuracy and power in sheer abundance. SPL peaks beyond 120 dB are produced without any compression or harshness. The S6X is a top shelf choice for larger control rooms and film or sound studios.

Control panel (S6X & S7A Mk2)

Numerous controls on the front panel introduce a new degree of control for main monitors. Along with the input gain, there are level controls for each of the four drivers, shelving filters on both ends of the frequency spectrum, and three full parametric EQs (20-200Hz) that can be used to combat standing waves in the control room. The EQ can be bypassed individually or as a group so that their overall effect can be analyzed in direct comparison to the unaffected signal.

In large film score mixing rooms, it may be desirable to have a representation of the sound in the theatres. To meet the ISO 2969 Standard, the Dolby™ X-curve has to be applied.

Using pink noise, the X-curve engages a 3 dB per octave roll-off above 2 kHz. Both the S6X and S7A Mk2 have a switch that activates this filter, eliminating the need for external processing during the film mix.

A second switchable input on the front allows servicing without moving the unit.

All LED indicators can be dimmed if necessary.

Subwoofer
Number 2
Basket Ø 12″ (305 mm)
Voice coil Ø 3″ (75 mm)
Cone material HexaCone
Woofer
Number 2
Basket Ø 7.5″ (186 mm)
Voice coil Ø 2″ (50 mm)
Cone material HexaCone
Midrange
Number 2
Type X-ART
Diaphragm area 26 inch² (16800 mm²)
Equiv. Diaphragm Ø 5.5″ (146 mm)
Velocity transform ratio 3.5:1
Diaphragm weight 0.7 g
Tweeter
Number 1
Type X-ART
Diaphragm area 4 inch² (2420 mm²)
Equiv. Diaphragm Ø 2″ (56 mm)
Velocity transform ratio 4:1
Diaphragm weight 0.17 g
Built-in Amplifiers
Subwoofer 2
Type PWM
Amp. power RMS / music 500 W / 700 W
Woofer 2
Type PWM
Amp. power RMS / music 250 W / 350 W
Midrange 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Tweeter 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Control panel
Input Sensitivity ±10 dB
EQ 80 Hz (Quality / Hz / Level) 3 x 0.2 – 20 / 20 – 200 / ±12 dB
High Shelf EQ > 6 kHz ±6 dB
Low Shelf EQ ±6 dB
Sub Gain ±4 dB
Mid-Woofer Level ±2 dB
Mid level ±2 dB
Tweeter gain ±4 dB
Input connectors
Analog XLR
General data
Panel Front
X-Curve-Filter yes
Frequency response 23 Hz – 50 kHz
THD 90dB/1m > 100 Hz ≤0.5 %
Long term output ≥123 dB
Max. peak ≥133 dB
Crossover frequencies 85 / 800 / 3100 Hz
Input impedance 10 KOhm
Weight 213.8 lb (97 kg)
Height x Width x Depth 28.5″ (720 mm) x 37″ (940 mm) x 19.5″ (490 mm)
Warranty 5 Years
Delivery contents

Power cord, Manual

 

 

 

Weight 100.00 kg

Reviews

There are no reviews yet.

Be the first to review “ADAM S6X Active Studio Monitor 500W”

Your email address will not be published. Required fields are marked *

Quick Comparison

ADAM S6X Active Studio Monitor 500W removeJBL LSR 6325P COMPACT STUDIO REFERENCE MONITOR removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeBEHRINGER MS20 24-Bit-192 kHz Digital 20-Watt Stereo Near Field Monitors pair removeADAM S1X Active Studio Monitor 200W removeADAM A77X Active Studio Monitor 100W remove
NameADAM S6X Active Studio Monitor 500W removeJBL LSR 6325P COMPACT STUDIO REFERENCE MONITOR removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeBEHRINGER MS20 24-Bit-192 kHz Digital 20-Watt Stereo Near Field Monitors pair removeADAM S1X Active Studio Monitor 200W removeADAM A77X Active Studio Monitor 100W remove
Image
SKUS6XLSR 6325P040050E005320S1XA77X
Rating
Price 18,800.00 incl. GR VAT 590.00 incl. GR VAT 155.00 incl. GR VAT 119.00 incl. GR VAT 930.00 incl. GR VAT 1,175.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

PRICE PER UNIT

 

ΤΙΜΗ ΤΕΜΑΧΙΟΥ

Main Monitors: S6X & S7A Mk2

The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive
concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAMʼs main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means superior imaging and better localization, facilitating the best possible transportability of mixes across the widest range of playback systems.

Advanced DʽAppolito-array

The arrangement of the seven discrete drivers facilitates a gradual transition of the chassis dimensions. One of the most important aspects of these monitorʼs new approach is the horizontal symmetry of the drivers, which could be referred to as advanced D´Appolito array. If the drivers are filtered properly there are – besides the dispersion characteristics mentioned previously – two more advantageous results:

  • There is an absence of any sudden change in directivity with frequency, leading to harmonic dispersion behavior throughout the audio band. The absence of sudden changes in directivity is not visible in a frequency plot, but clearly audible - especially with a full range of materials, from single complex sources such as the human voice to the wide sonic palette of large orchestras.
  • The dynamic capabilities of the monitor are distributed over the audio band more equally, and louder recording or mixdown sessions with SPL´s of 120dB are handled without offending the ear.

Impulse Coupling

In order to get a precise and undistorted reproduction, all drive units are mounted on an ultra stiff Aluminum honeycomb plate (=IC).

Amplifiers

Both the S6X and the S7A Mk2 ADAM use the new generation of switching amps and power supplies (=PWM).

These are combined in an extremely powerful (1000 and 1500W rms respectively) yet cool amplifier assembly. Together with the built in overload protection circuits these amplifiers will run reliably and at constant safe operating temperatures not possible with conventional designs.

The amplifiers are of extremely low output impedance, leading to a damping factor >4.000, enabling them to strictly control the motion of the drive units.

The S6X: accuracy and power

The S6X is one of the most ambitious studio monitors available today. They can be found in some of the highest profile studios in the industry, from elite private studios to world class jazz, from rock and orchestral tracking and mixing facilities to high powered hip hop production rooms. The concept of the horizontal symmetry of the drivers is greatly affected by the generous proportions of the larger diaphragms, resulting in both exceptionally flat frequency response and extremely realistic dynamic reproduction across the entire audio spectrum. Numerous controls at the front panel allow detailed adaptations to different acoustic environments.

This main monitor offers very high accuracy and power in sheer abundance. SPL peaks beyond 120 dB are produced without any compression or harshness. The S6X is a top shelf choice for larger control rooms and film or sound studios.

Control panel (S6X & S7A Mk2)

Numerous controls on the front panel introduce a new degree of control for main monitors. Along with the input gain, there are level controls for each of the four drivers, shelving filters on both ends of the frequency spectrum, and three full parametric EQs (20-200Hz) that can be used to combat standing waves in the control room. The EQ can be bypassed individually or as a group so that their overall effect can be analyzed in direct comparison to the unaffected signal.

In large film score mixing rooms, it may be desirable to have a representation of the sound in the theatres. To meet the ISO 2969 Standard, the Dolby™ X-curve has to be applied.

Using pink noise, the X-curve engages a 3 dB per octave roll-off above 2 kHz. Both the S6X and S7A Mk2 have a switch that activates this filter, eliminating the need for external processing during the film mix.

A second switchable input on the front allows servicing without moving the unit.

All LED indicators can be dimmed if necessary.

Subwoofer
Number2
Basket Ø12" (305 mm)
Voice coil Ø3" (75 mm)
Cone materialHexaCone
Woofer
Number2
Basket Ø7.5" (186 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Midrange
Number2
TypeX-ART
Diaphragm area26 inch² (16800 mm²)
Equiv. Diaphragm Ø5.5" (146 mm)
Velocity transform ratio3.5:1
Diaphragm weight0.7 g
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Subwoofer2
TypePWM
Amp. power RMS / music500 W / 700 W
Woofer2
TypePWM
Amp. power RMS / music250 W / 350 W
Midrange1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypePWM
Amp. power RMS / music250 W / 350 W
Control panel
Input Sensitivity±10 dB
EQ 80 Hz (Quality / Hz / Level)3 x 0.2 - 20 / 20 - 200 / ±12 dB
High Shelf EQ > 6 kHz±6 dB
Low Shelf EQ ±6 dB
Sub Gain±4 dB
Mid-Woofer Level±2 dB
Mid level±2 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR
General data
PanelFront
X-Curve-Filteryes
Frequency response23 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥123 dB
Max. peak≥133 dB
Crossover frequencies85 / 800 / 3100 Hz
Input impedance10 KOhm
Weight213.8 lb (97 kg)
Height x Width x Depth28.5" (720 mm) x 37" (940 mm) x 19.5" (490 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

 

 

 

The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.

Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
 


Features

    Professional 2-way active DJ monitors
    Output: 2x 30 W RMS
    Frequency response: 35 Hz - 20 kHz
    S/N Ratio: > 75 dB
    Impedance: 8 ohm
    Magnetically shielded bass drivers
    Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter



    Technical Data

    Dimensions: 232 x 320 x 180 mm
    Weight: 5.0 kg (per piece)

Behringer MS-20 24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors

OVERVIEW

The MS20 Studio Monitors from Behringer are a pair of extremely compact, 2 x 10-Watt nearfield monitors that feature high-resolution 24-bit/192 kHz D/A converters. With the MS20, you can connect directly to your digital signal sources and eliminate annoying analog line-loss and hum forever. Whether you connect to your computer sound card, keyboard, or MP3 player, you will enjoy exceptional sound quality with great dynamics. The built-in amplifiers provide lots of headroom, while the powerful woofers and tweeters provide ultra-linear frequency response.

The MS20 connectivity includes stereo 1/8" and RCA jacks, which can be used simultaneously or mixed with a digital stereo source. Digital duties are handled by either RCA or TOSLINK sockets, providing for ultra-simple hookup. Individual volume controls for both Line inputs plus Bass and Treble EQ controls are provided on the front panel, along with a 1/4" headphone jack that automatically mutes the internal speakers.

Sound Quality
Sporting 3.625" woofers and 2.5" high-resolution tweeters, MS20 monitor speakers bring quality audio within the reach of anyone that operates a computer workstation. Whether you're a musician tracking your latest masterpieces, or just someone who listens to your favorite songs at work, MS20 loudspeakers will make them sound significantly better. They also make excellent add-on speakers for electronic keyboards. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.

Built-in Mixer
The MS20 takes audio to an even higher level with its multiple input options. The built-in mixer features 1/8" stereo inputs for connecting CD/MD/MP3 players, dual RCA jacks for tape decks and stereo keyboard modules, and even both RCA and TOSLINK connectors for digital signal sources. This adds up to a system that lets you play along with a variety of prerecorded tracks. And you can wail away to your heart's content in total privacy, thanks to MS20's powerful headphone jack.

 FEATURES

  • 2-Way active studio monitor pair
  • Ideally suited for computer studios, multimedia workstations and keyboards
  • Built-in 2 x 10-Watt powerful amplifiers with lots of headroom
  • Powerful woofers and high-resolution tweeters
  • High-resolution 24-bit/192 kHz D/A converters for extended dynamic range
  • Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
  • Two stereo analog inputs featuring 1/4'' TRS and stereo RCA connectors
  • Individual volume controls for both Line inputs plus Bass and Treble EQ controls
  • 1/4'' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel

SPECIFICATIONS

MS20 Digital Monitor Speakers (Pair)

  • Loudspeakers
    Tweeter: ˜ 65 mm (2 1/2“), 8 ?
    Woofer: ˜ 92 mm (3 5/8“), 4 ?
    Audio Inputs
    Line 1: 1/8" TRS stereo, impedance 20 k?
    Line 2: 2 RCA, impedance 20 k?
    Digital Inputs
    Optical: TOSLINK
    Coaxial: RCA
    Converter: 24-bit
    Sample rate: System Specs
    Output power: 2 x 20W
    Frequency response: 50Hz to 25kHz
    Power Supply
    Mains Voltages: USA/Canada 120 V, 60 Hz
    Power Consumption: 80W
   

PRICE PER UNIT

 

S1X

The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.

The smallest reference speaker

The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.

The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.

Woofer
Number1
Basket Ø6" (156 mm)
Voice coil Ø1.5" (37 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music200 W / 280 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)±10 dB
High Shelf EQ > 6 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR
General data
PanelRear
Frequency response40 Hz - 50 kHz
THD > 80 Hz≤1.5 %
Long term output≥103 dB
Max. peak≥113 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight13.2 lb (6 kg)
Magnetically shieldedOptional
Height x Width x Depth11.5" (295 mm) x 7" (175 mm) x 10" (260 mm)
Warranty5 Years
Delivery contents

Power cord, Manual


 

 

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

Subwoofer
Number1 / 1
Basket Ø7" (175 mm) / 7" (175 mm)
Voice coil Ø1.5" (38 mm) / 1.5" (38 mm)
Cone materialCarbon / rohacell / glass / Carbon / rohacell / glass
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
LocationRear
General data
PanelFront
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥114 dB
Max. peak≥122 dB
Crossover frequencies400 / 3000 Hz
Input impedance30 KOhm
Weight28.2 lb (12,8 kg)
Magnetically shieldedOptional
Height x Width x Depth9.5" (235 mm) x 21" (530 mm) x 11" (280 mm)
Warranty5 Years

 
Weight100.00 kg8.00 kg3.50 kg6.00 kg6.00 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 100.00 kg
Weight 8.00 kg
Weight 3.50 kg
Weight 6.00 kg
Weight 6.00 kg
Weight 13.00 kg