| Content |
Defender Compact BASE
Base for 85100 Cable Protector 5-channel
- Fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- resistant to oil, acids, solvents, and petrol
- Dimensions 80 x 43 x 4 cm
- reliable protection for cables and personnel for indoor and outdoor use
- suitable for higher loads such as forklifts and lifting trucks
- channels with base: 5 channels 22 x 21 cm
- weight with base: 7 kg
- not suitable for vehicular traffic
Defender® Compact with Base
Attached to the optional 5-channel base the Defender® COMPACT drop-over cable protector transforms into a heavy-duty guard with high load capacity to support trucks, forklifts and other vehicles. The ribbed surface provides excellent traction while integrated connectors on the base and drop-over facilitate lining up to form a rigid continuous protection system. The range of applications includes construction sites, carnivals, fairs, trade shows, exhibitions, warehouses, shopping malls and music events.
Product type
Cable Protector Accessories
Type
5-channel , Bases
Length
804 mm
Height
37 mm
Width
241 mm
Channels
5
Width channel 1
22 mm
Height channel 1
21 mm
Width channel 2
22 mm
Height channel 2
21 mm
Width channel 3
22 mm
Height channel 3
21 mm
Width channel 4
22 mm
Height channel 4
21 mm
Width channel 5
22 mm
Height channel 5
21 mm
Material
polyurethane
Max. load
Fork lift, lifting truck
Chemical resistance
acid-resistant , oil-resistant , petrol-resistant
Weight
2,031 kg
Special feature
DEKRA-certified
|
End ramp for cable outlet reduces the risk of tripping
| 6 narrow cable channels – discreet cable protection for indoor and outdoor use
Defender® NANO cable crossovers are particularly flat and easy to cross with a wheelchair. They are suitable for a wide range of indoor and outdoor applications and are available with either a yellow or black lid. These cable crossovers boast 6 cable channels for neat, orderly cable routing, T-connectors and a load capacity of 2 tonnes on an area of 20 x 20 cm; besides pedestrian traffic, they also take light-duty vehicles, trolleys and – thanks to their flat profile – even forklift and pallet trucks. Separately available end ramps (male/female) ensure safe insertion and removal of cables. Defender NANO cable crossovers can be used at carnival events, trade shows, exhibitions, shopping centres and storage facilities as well as in theatres, studios and TV stations. Not suitable for road traffic.
Label your cable crossovers! All Defender cable crossovers can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Don’t hesitate to contact us.
- especially flat, non-slip cable protector made of black, recyclable polyurethane, wheelchair-compatable
- yellow polyethylenelid with high warning effect and secure closure (also available with black lid, Item No. 85150BLK)
- patented, self-cleaning lid hinge
- 6 channels 17 x 18 mm
- load bearing capacity approx. 2t / 20 x 20 cm
- fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- resistant to oil, acids, solvents, and petrol
- dimensions 100 x 28 x 3.2 cm; Weight 4.37 kg
- reliable protection for cables and personnel for indoor and outdoor use
- not suitable for vehicular traffic
- end ramps for secure cable inlet and exit as accessories
Product type
Cable Protectors
Type
6 Channels
Length
1000 mm
Width
280 mm
Height
32 mm
Channels
6
Width channel 1
17 mm
Height channel 1
18 mm
Width channel 2
17 mm
Height channel 2
18 mm
Width channel 3
17 mm
Height channel 3
19 mm
Width channel 4
17 mm
Height channel 4
19 mm
Width channel 5
17 mm
Height channel 5
18 mm
Width channel 6
17 mm
Height channel 6
18 mm
Material
polyurethane
Max. load
ca. 2t on a surface area of 20 x 20 cm
Chemical resistance
acid-resistant , oil-resistant , petrol-resistant
Hardness range
88 ± 4 Shore
Fire protection class
B2
Temperature range
-30 to + 60 °C
Weight
4,37 kg
Special feature
DEKRA-certified |
Technical drawing - 85002 [356,1 KB]
Technical Inspection Agency report [655,3 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Cable Crossover with lid load bearing capacity per typical tyre imprint (20 x 20 cm): 5 tons. Crossover lengths are joined by individually available connector plugs. Each crossover is supplied with one pair of connector plugs. The lid closes down onto a patented "interlock zipper" (EU Patent No.: EP1366550) which is moulded into the base and lid - no Velcro to tear off or clog with dirt. A complete range of accessories expands the Defender III into a flexible system to protect your cables and multicores.
- Basic module with approved and patented interlocking lid
- Lenght: 100 cm
- Width: 60 cm
- Height: 7.3 cm
- Channels: 3
- Width (Channels): 52 mm, 45 mm, 56 mm
- Height (Channels): 49 mm, 50 mm, 49 mm
- Flame Class: B2
- Load bearing: Approx 5 tons per typical tyre imprint (20 x 20 cm)
- The Cable-Crossover is oil, acid & petrol resistant
- Operating Range: -30°C up to +60°C
- DEKRA certified - Certified product safety
- 2 connector plugs included
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information.
|
Technical drawing - 85200 [219,8 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Small but sturdy. Light, professional and universally applicable, with the familiar black and yellow design. The new Defender Mini meets every expectation for professional cable protection, expanding the Defender series with a very light (only 5 kg!), compact cable crossover, capable of supporting vehicle traffic.
Featuring three cable ducts and a cable cross-section of 35 mm², with an overall height of 48 mm, although used primarily indoors, this crossover can readily support car traffic, due to the load-bearing capacity of more than 2 tons.The bottom of the Defender Mini has a non-slip surface, to ensure an optimal grip on the widest variety of surfaces. Like all of the Defender series crossovers, the Defender Mini is resistant to oils, acids, and petrol, and has a patented self-cleaning hinged closure.
- Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
- Length: 100 cm
- Width: 29 cm
- Height: 4.8 cm
- Channels: 3
- Width Channels: 35 mm
- Height Channels: 30 mm, 35 mm, 30 mm
- Material: PU (polyurethane)
- Shore A hardness: 88 ± 4
- Flammability class: B2
- Operating temperature: -30°C to +60°C
- Load-bearing capacity: approx. 2 tons, for a surface area of 20 cm x 20 cm
- DEKRA certified - Certified product safety
- Weight 4,65 Kg
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information.
|
Rubber matting cable cover - 10m x 1m roll Fine-grooved rubber mat, black, SBR quality,
3 mm thick, width 100cm, length 10m, non-slip, resilient covering for all high traffic areas,
weather proof, lies flat, coarsely patterned underside, ideal for protecting cables of all types,
matting can be trimmed to the desired size.32.9 kg/Piece |
Reviews
There are no reviews yet.