ADAM S5X-H Active Studio Monitor 500W

6,908.56 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
PRICE PER UNIT S5X: Main Monitors a notch above Both Versions of the S5X models have been designed for medium and large sized control rooms in which the precision and the power of the sound production are essential. The main task of these monitors is to bring the extraordinary sound quality all ADAM monitors are […]

 

Read more

PRICE PER UNIT

S5X: Main Monitors a notch above

Both Versions of the S5X models have been designed for medium and large sized control rooms in which the precision and the power of the sound production are essential. The main task of these monitors is to bring the extraordinary sound quality all ADAM monitors are famous for into areas of higher dynamics and higher sound pressure levels.

Drivers

The S5X-H features two 12” HexaCone woofers, a 7.5” HexaCone midwoofer unit, an X-ART midrange and an X-ART tweeter. This combination is capable of filling large control rooms with breathtaking realism and stunning dynamic performance.

Amplifiers

The upper three drivers are each powered by a 250 W discrete PWM amplifier while two 500 W digital amp drive the two 12” woofers.

The X-ART midrange

The most famous and highly acclaimed feature of all ADAM monitors is the proprietary Accelerating Ribbon Technology tweeters. An exclusive feature of the main monitors is the application of this technology to the midrange as well.

In accordance to the X-ART tweeters, also the midrange units now feature the improved X-ART. Compared to their ART predecessors, these midranges show improvements namely in higher efficiencies and higher maximum sound pressure levels.

Subwoofer
Number 2
Basket Ø 12″ (305 mm)
Voice coil Ø 3″ (75 mm)
Cone material HexaCone
Mid-Woofer
Number 1
Basket Ø 7.5″ (186 mm)
Voice coil Ø 2″ (50 mm)
Cone material HexaCone
Midrange
Number 1
Type X-ART
Diaphragm area 26 inch² (16800 mm²)
Equiv. Diaphragm Ø 5.5″ (146 mm)
Velocity transform ratio 3.5:1
Diaphragm weight 0.7 g
Tweeter
Number 1
Type X-ART
Diaphragm area 4 inch² (2420 mm²)
Equiv. Diaphragm Ø 2″ (56 mm)
Velocity transform ratio 4:1
Diaphragm weight 0.17 g
Built-in Amplifiers
Subwoofer 2
Type PWM
Amp. power RMS / music 500 W / 700 W
Mid-Woofer 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Midrange 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Tweeter 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Control panel
Input Sensitivity (coarse) -20 to +8 dB (4 dB steps)
Input Sensitivity (fine) -1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz 0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz ±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain ±2 dB (0.5 dB steps)
Input connectors
Analog XLR
Digital (optional) AES/EBU / SPDIF / word clock
General data
Frequency response 24 Hz – 50 kHz
THD 90dB/1m > 100 Hz ≤0.5 %
Long term output ≥121 dB
Max. peak ≥131 dB
Crossover frequencies 200 / 800 / 4000 Hz
Input impedance 10 KOhm
Weight 139.8 lb (63,4 kg)
Magnetically shielded No
Height x Width x Depth 27.5″ (700 mm) x 27.5″ (700 mm) x 18.5″ (473 mm)
Warranty 5 Years
Delivery contents

Power cord, Manual

Weight 65.00 kg

Reviews

There are no reviews yet.

Be the first to review “ADAM S5X-H Active Studio Monitor 500W”

Your email address will not be published. Required fields are marked *

Quick Comparison

ADAM S5X-H Active Studio Monitor 500W removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeSAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR) removeMACKIE HR624mk2 Monitor - Active Reference Monitor removeADAM A8X Active Studio Monitor 150W removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM remove
NameADAM S5X-H Active Studio Monitor 500W removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeSAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR) removeMACKIE HR624mk2 Monitor - Active Reference Monitor removeADAM A8X Active Studio Monitor 150W removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM remove
Image
SKUS5XHDM-2100GT149.018A8XMYTHO8
Rating
Price 6,908.56 incl. GR VAT 378.80 incl. GR VAT 204.80 incl. GR VAT 499.00 incl. GR VAT 1,045.00 incl. GR VAT 976.50 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

PRICE PER UNIT

S5X: Main Monitors a notch above

Both Versions of the S5X models have been designed for medium and large sized control rooms in which the precision and the power of the sound production are essential. The main task of these monitors is to bring the extraordinary sound quality all ADAM monitors are famous for into areas of higher dynamics and higher sound pressure levels.

Drivers

The S5X-H features two 12” HexaCone woofers, a 7.5” HexaCone midwoofer unit, an X-ART midrange and an X-ART tweeter. This combination is capable of filling large control rooms with breathtaking realism and stunning dynamic performance.

Amplifiers

The upper three drivers are each powered by a 250 W discrete PWM amplifier while two 500 W digital amp drive the two 12” woofers.

The X-ART midrange

The most famous and highly acclaimed feature of all ADAM monitors is the proprietary Accelerating Ribbon Technology tweeters. An exclusive feature of the main monitors is the application of this technology to the midrange as well.

In accordance to the X-ART tweeters, also the midrange units now feature the improved X-ART. Compared to their ART predecessors, these midranges show improvements namely in higher efficiencies and higher maximum sound pressure levels.

Subwoofer
Number2
Basket Ø12" (305 mm)
Voice coil Ø3" (75 mm)
Cone materialHexaCone
Mid-Woofer
Number1
Basket Ø7.5" (186 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Midrange
Number1
TypeX-ART
Diaphragm area26 inch² (16800 mm²)
Equiv. Diaphragm Ø5.5" (146 mm)
Velocity transform ratio3.5:1
Diaphragm weight0.7 g
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Subwoofer2
TypePWM
Amp. power RMS / music500 W / 700 W
Mid-Woofer1
TypePWM
Amp. power RMS / music250 W / 350 W
Midrange1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypePWM
Amp. power RMS / music250 W / 350 W
Control panel
Input Sensitivity (coarse)-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain±2 dB (0.5 dB steps)
Input connectors
AnalogXLR
Digital (optional)AES/EBU / SPDIF / word clock
General data
Frequency response24 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥121 dB
Max. peak≥131 dB
Crossover frequencies200 / 800 / 4000 Hz
Input impedance10 KOhm
Weight139.8 lb (63,4 kg)
Magnetically shieldedNo
Height x Width x Depth27.5" (700 mm) x 27.5" (700 mm) x 18.5" (473 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

DM-2100: 2.1-ch Speaker System Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.

  • Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
  • Powered bass reflex speakers with 15 watts per side and flat frequency response
  • Active subwoofer with 50-watt amplifier for increased low end
  • Front-mounted controls convenient located on right speaker
  • Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
  • Sleek black wooden cabinets with magnetic shielding

Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight

Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches

    * Active studio monitors with USB audio interface
    * 4.25-inch magnetically shielded, inverted cone, copolymer woofer
    * 1-inch silk dome high frequency driver
    * 2 x 20 watts of internal stereo power
    * Two combination mic and instrument/line inputs
    * Two 1/8-inch stereo headphone outputs with level controls
    * Includes Cakewalk® Sonar LE music production software
    * Mic and instrument/line gain control with clip LED
    * 16-bit 44.1kHz/48kHz
    * Stereo RCA and 1/8-inch aux inputs
    * 2-position switch for no-latency direct stereo and mono monitoring
    * Mix control to balance computer and audio sources
    * USB and speaker cable included


Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB

Benefit: Sound true to actual recording

Benefit: Any pair of speakers is a matched pair

Active Technology

2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W

Benefit: Precise dividing slope, correct phase, and low distortion

Benefit: Minimal chance of speaker damage due to overdriving

Servo Loop Woofer Technology

Electronic control and dampening

Benefit: Speaker output is as true to incoming signal as possible

Frequency Response Controls

80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)

Benefit: Excellent response in a variety of acoustic environments

Wide Sweet Spot

Custom-designed die-cast wave guide

Benefit: User hears the same thing across a wider range of motion

3-Position Acoustic Space Switch

Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement

Benefit: As close-to-flat performance as possible regardless of placement in room

Applications
Professional Recording Studios

Home and Project Studios

Film (THX) and Post Production Studios

Home Theater Installations

 

Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
 

Acoustical Specifications
Frequency Response -3 dB:35 Hz÷ 20 kHz
Max SPL:116 dB 
Horizontal coverage angle:110° 
Vertical coverage angle:70° 
Compression Driver:1" neo, metal dome 
Woofer:8" neo, ICC technology 
INPUT/OUTPUT SECTION
Input connectors:combo XLR/Jack 
Input sensitivity:-6/+6 dBu 
PROCESSOR SECTION
Crossover frequencies:1800 Hz 
Protections:thermal, excurs., rms 
Limiter:soft limiter 
Controls:bass tilt, roll-off, treeble tilt, desktop, DSP controlled 
AMPLIFIER SPECIFICATIONS
High frequencies:100 Watts 
Low frequencies:200 Watts 
Cooling:convection 
Connections:vde 
CABINET
Cabinet Material:die cast aluminum 
Hardware:orientation adjustable stand 
PHYSICAL SPECIFICATIONS
Height:430/17 mm/inch 
Width:310/12.2 mm/inch 
Depth:300/11.8 mm/inch 
Net Weight:16.150/35.60 Kg/Lbs

 

Weight65.00 kg15.00 kg4.30 kg12.25 kg13.00 kg20.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 65.00 kg
Weight 15.00 kg
Weight 4.30 kg
Weight 12.25 kg
Weight 13.00 kg
Weight 20.00 kg