| Content |
Celestion CDX14-3050 CDX20-3000 8 ohm Aftermarket Diaphragm
This is an aftermarket diaphragm that fits many Celestion models.
Our diaphragm is rated for the same amount of power and sounds just like the original diaphragm.
Overall Diaphragm Diameter: 3.75"
Voice Coil Diameter: 3"
Impedance: 8 ohms.
DCR is 6.6 ohms.
Fit with: CDX14-3050 and CDX20-3000 and more.
No soldering needed and the diaphragm is self centering for an easy install
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
-
JBL Original Speaker Diaphragm Part # D8R2418-1
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
The JBL D16R2450 is the replacement HF diaphragm for the following JBL products:
- SR4731A
- SR4733A
- SR4731X
- SR4732X
- SR4733X
Note: If your speaker has an Ultra HF driver as well as a HF driver, the Ultra HF driver takes a different diaphgragm.
|
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
| |
This diaphragm is used in models 2404H, 2404H-1, and 2405. This diaphragm is also the correct replacement for the Peavey HT94!
Specifications:
8 ohm
DCR is 6.1 +or- 8%
Overall diaphragm diameter 2 15/16-in or 75mm
Voice coil diameter 1 3/4-in or 44mm
|
Reviews
There are no reviews yet.