Content |
Alesis Elevate 3 studio speakers enable you to listen to mixes, masters and multimedia content with impressive clarity and warm, full sound. Built using technology adopted from Alesis' award-winning Monitor One and M1Active professional studio monitors, Elevate 3 studio speakers are the perfect way to upgrade your computer or mobile device experience.
Elevate 3 speakers bring out every detail of your sound, unencumbered and crystal clear. Their custom wooden cabinets have a dense construction that provides natural bass. You'll also have the ability to increase power and bass extension by connecting an optional powered subwoofer.
Packaged in stereo-matched sets, Elevate 3 studio speakers give you everything you need, all in one box.
SOUNDSATIONAL
Elevate 3 studio speakers contain powerful, three-inch woofers, crisp, one-inch silk-dome tweeters and dedicated power. Alesis engineers carefully selected and tuned these crucial components to work in concert as a single unit within the custom wood cabinet to deliver full lows, clean highs and a detailed compelling stereo image. Magnetic shielding ensures that you'll never have to worry about placement or interference with displays, TVs and other electronic equipment. And unlike passive speakers, Elevate 3 speakers have a volume knob built right in to the front panel for easy control.
TIME-TESTED TECHNOLOGY
Alesis has been creating studio monitors for nearly a quarter century. In that time, we've learned a thing or two about maximizing sound and sonic clarity. Elevate 3 speakers leverage Alesis' experience in designing studio loudspeakers by employing custom-designed wood cabinets that stay natural and neutral, regardless of the frequency content or volume.
FLEXIBLE I/O
A pair of rugged RCA jacks is onboard, perfect for connecting mixers, interfaces, and virtually any other piece of audio gear. A 1/8-inch stereo connection gives you the ability to switch to headphones easily at anytime, and connecting the speakers is just as easy, requiring just one standard 1/8-inch cable (included). If you're frequently on the move, Elevate 3 is the speaker for you: they feature a built-in power supply so they'll work worldwide with no wall-wart power supply to lose!
Elevate 3 studio speakers are designed to produce natural frequency response. But if you need a little more low-end punch, a convenient bass-boost switch does the trick. And if you need even more power and low-end extension, Elevate 3 features a subwoofer output compatible with virtually any powered subwoofer.
Trust your sound to the clarity, precise design and premium performance of Alesis Elevate 3 studio speakers.
Key Features:
- Precise audio amplification for project studios, video playback, gaming and mobile devices
- Separate high- and low-frequency drivers with crossover
- High-fidelity amplification with 60-watt peak power
- Custom wooden cabinets with dense construction for full, warm sound
- Carefully formed baffle radiuses reduce edge diffraction
- Magnetic shielding for desktop use next to computer monitors, displays, TVs and other electronic equipment
- Flexible I/O and worldwide power options
- Dedicated subwoofer output for use with virtually any powered subwoofer
Includes: - (2) Elevate 3 Speakers
- Audio Cable
- Interconnection Cable
- Power Cable
- Quickstart Guide
- Safety & Warranty Manual
Specs:
- Audio Inputs: RCA
- Interconnection: 1/8“
- Subwoofer Output: 1/8“
- LF Driver: 3-inch
- HF Driver: 1-inch, silk dome
- Power, peak: 60W
- Power, continuous: 10W x 2
- Front Baffle Thickness: 15mm
- Magnetically Shielded: yes
- Frequency Response: 80-20,000 Hz
- Voltage: Universal input switch mode power supply
|
PRICE PER UNIT S1X The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers. The smallest reference speaker The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs. The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation. Woofer | | Number | 1 | Basket Ø | 6" (156 mm) | Voice coil Ø | 1.5" (37 mm) | Cone material | HexaCone | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Woofer | 1 | Type | PWM | Amp. power RMS / music | 200 W / 280 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel | | Input Sensitivity (coarse) | ±10 dB | High Shelf EQ > 6 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR | General data | | Panel | Rear | Frequency response | 40 Hz - 50 kHz | THD > 80 Hz | ≤1.5 % | Long term output | ≥103 dB | Max. peak | ≥113 dB | Crossover frequencies | 2200 Hz | Input impedance | 10 KOhm | Weight | 13.2 lb (6 kg) | Magnetically shielded | Optional | Height x Width x Depth | 11.5" (295 mm) x 7" (175 mm) x 10" (260 mm) | Warranty | 5 Years | Delivery contents | Power cord, Manual |
|
* Active studio monitors with USB audio interface
* 4.25-inch magnetically shielded, inverted cone, copolymer woofer
* 1-inch silk dome high frequency driver
* 2 x 20 watts of internal stereo power
* Two combination mic and instrument/line inputs
* Two 1/8-inch stereo headphone outputs with level controls
* Includes Cakewalk® Sonar LE music production software
* Mic and instrument/line gain control with clip LED
* 16-bit 44.1kHz/48kHz
* Stereo RCA and 1/8-inch aux inputs
* 2-position switch for no-latency direct stereo and mono monitoring
* Mix control to balance computer and audio sources
* USB and speaker cable included
|
PRICE PER UNIT A revolutionary formula: 2 x 7 = 77 In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line. The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring. Driver technology Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels. The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. Review samples: “… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012 “… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012 Subwoofer | | Number | 1 / 1 | Basket Ø | 7" (175 mm) / 7" (175 mm) | Voice coil Ø | 1.5" (38 mm) / 1.5" (38 mm) | Cone material | Carbon / rohacell / glass / Carbon / rohacell / glass | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | Location | Rear | General data | | Panel | Front | Frequency response | 38 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥114 dB | Max. peak | ≥122 dB | Crossover frequencies | 400 / 3000 Hz | Input impedance | 30 KOhm | Weight | 28.2 lb (12,8 kg) | Magnetically shielded | Optional | Height x Width x Depth | 9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) | Warranty | 5 Years |
|
The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.
Specifications Frequency response : | 40Hz - 40kHz | Maximum SPL : | 115dB SPL (peak @ 1m) |
Input :
|
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
| Bass/mid-range : | 2x150W rms, BASH® technology | Treble : | 100W rms, AB class |
Electric supply :
|
Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire
|
Visualization and control :
|
Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector
| warning light : | Power on LED |
Electric supply :
|
Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire
| Woofer : | 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker | Tweeter : | TB871, Focal inverted dome tweeter in Beryllium | transducer shielding : | Integral through cancellation magnets or by magnet design | Box : | 7-1/2" (19mm) MDF panels |
Finish :
|
Dark red natural veneering side panels, black body
| Dimensions (HxWxD) : | 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm) | Weight : | 30.8lb (14kg) |
|
PRICE PER UNIT The original A5 The small A5 managed to make itself a big name in both professional environments as well as in computer or desktop applications. A wealth of truly outstanding reviews and many awards helped to establish this speaker as one "of the best small monitors” and a "great choice for the small studio.” (Future Music, 01/2009). The new A5X The similar dimensions and name could make one believe that the A5X is nothing more than a new version of the A5. A quick listening however leaves no doubt that the A5X is much more than that. Like all other models of the AX-Series it features the proprietary X-ART tweeter. The very data of this technology shows that it is at the forefront of what tweeters can accomplish. Numerous listening tests have confirmed this. A 5.5” Midwoofer reproduces the frequencies below 2.5kHz. The diaphragm is made from Carbon fiber/Rohacell/Glass fiber, which is the same composite structure shared in the next two bigger models. This material with minimum weight and maximum rigidity prevents break up resonances, resulting in an outstanding dynamic behaviour and impeccable sound characteristics. Stereolink A very handy and exclusive feature found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker. This new technology connects two A5X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily. Controls and Connectors The front of the A5X sports dual ports for surprisingly low frequency response down to 50Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting. Review: "The A5X: a superb impression.“ "A sparkling and lively desktop monitor with an open, powerful character. Good filters and practical ergonomics as well as useful equipment make ADAMs A5X an ideal partner in multimedia nearfield sound." (Stereo, 10/10) Mid-Woofer | | Number | 1 | Basket Ø | 5.5" (145 mm) | Voice coil Ø | 1.5" (32 mm) | Cone material | Carbon/Rohacell/Glass Fiber | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Mid-Woofer | 1 | Type | PWM | Amp. power RMS / music | 50 W / 75 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | General data | | Frequency response | 50 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.6 % | Long term output | ≥102 dB | Max. peak | ≥110 dB | Crossover frequencies | 2500 Hz | Input impedance | 30 KOhm | Weight | 14.6 lb (6,6 kg) | Magnetically shielded | No | Height x Width x Depth | 11" (280 mm) x 6.5" (170 mm) x 8.5" (220 mm) | Warranty | 5 Years | Delivery contents | Cinch-cable, Power cord, Manual |
|
Reviews
There are no reviews yet.