ZED-6 has been created for musicians, singer / songwriters and venues seeking Allen & Heathʼs renowned build and audio quality in a compact, portable format. Whether itʼs bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZED-6 is a versatile companion for every step of the creative journey. […]
ZED-6 has been created for musicians, singer / songwriters and venues seeking Allen & Heathʼs renowned build and audio quality in a compact, portable format. Whether itʼs bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZED-6 is a versatile companion for every step of the creative journey. Featuring the new GSPre boutique preamp design, developed from the revered GS-R24 studio recording console, the ZED boasts exceptionally low noise and massive headroom, with a signature analogue warmth and depth. Guitarists will be pleased to know that ZED-6 comes with a pair of Guitar DI high impedance inputs, allowing guitars to be plugged straight into the mixer without the hassle and expense of carrying separate DI boxes.
2 Mic / Line Inputs with separate XLR and TRS jack sockets
2 Stereo Inputs with TRS jack sockets
2 Guitar DI high impedance inputs, eliminating the need for DI boxes
Lo-cut filter for cleaning up unwanted low frequency noise
2 band EQ for easy creative and corrective tonal shaping
60mm smooth travel fader on main mix
XLR main outputs
Flexible signal monitoring
8 LED signal metering
48V Phantom Power for condenser mics
Robust internal power supply
Weight
1.27 kg
Reviews
There are no reviews yet.
Be the first to review “ALLEN HEATH ZED 6 Analog Mixing Desk” Cancel reply
ZED-6 has been created for musicians, singer / songwriters and venues seeking Allen & Heathʼs renowned build and audio quality in a compact, portable format. Whether itʼs bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZED-6 is a versatile companion for every step of the creative journey. Featuring the new GSPre boutique preamp design, developed from the revered GS-R24 studio recording console, the ZED boasts exceptionally low noise and massive headroom, with a signature analogue warmth and depth. Guitarists will be pleased to know that ZED-6 comes with a pair of Guitar DI high impedance inputs, allowing guitars to be plugged straight into the mixer without the hassle and expense of carrying separate DI boxes.
2 Mic / Line Inputs with separate XLR and TRS jack sockets
2 Stereo Inputs with TRS jack sockets
2 Guitar DI high impedance inputs, eliminating the need for DI boxes
Lo-cut filter for cleaning up unwanted low frequency noise
2 band EQ for easy creative and corrective tonal shaping
60mm smooth travel fader on main mix
XLR main outputs
Flexible signal monitoring
8 LED signal metering
48V Phantom Power for condenser mics
Robust internal power supply
Low-cost high-performance mixers
Soundcraft have unveiled another addition to the rapidly growing new Soundcraft family, the multi-format low-cost EPM mixers.
The emphasis with the Soundcraft EPM is very firmly on quality build and audio performance, with an easy to understand control surface uncluttered by unnecessary facilities, and Soundcraft have brought new technologies and ideas to this very cost-effective range. Surface mount technology is used throughout, using close-tolerance components for high accuracy and repeatable settings for EQ and gain controls. The highly-transparent GB30 Mic amp (designed by Graham Blyth for the company�s 30th anniversary, and also used on the larger LX7ii and GB Series consoles) features high-resolution adjustment over a wide gain range of 55dB, and provides a stunning +22dB headroom through the console. True professional 48-volt phantom power caters for condenser microphones of all types.
A unique feature of the signal monitoring is the PEAK led. This uses multipoint signal take-offs to watch for overload in several parts of the channel strip, and the led lights more brightly as the signal approaches the peak point. For smooth and accurate channel control, the EPM has 60mm high quality faders as used on other Soundcraft desks. The monitor output and headphone output work in parallel so that performers can still listen on phones while an engineer is listening on studio monitors.
Other Features:
Frame sizes 8+2
2 configurable auxiliary buses
XLR-type and Ό� metal jack connector sockets
RCA phono stereo playback inputs and record outputs
3-band EQ with a swept mid on mono inputs
2-band EQ on stereo inputs
TRS insert sockets and inserts on all mono inputs and mix output
Ten-segment LED output metering
Intuitive and comprehensive solo system
Headphone output
Easily rack mountable
Soundcraft FX16ii - rebirth of a classic
The Soundcraft FX16ii mixer uses the same AudioDNA processor featured in many of the Digitech and Lexicon outboard equipment including the highly respected Lexicon MX500 processor. With over 35 years experience, the Lexicon name is synonymous with the best reverb and processing in the business, ensuring the finest quality effects not usually found in a console at this price level.
The Soundcraft FX16ii offers a combination of powerful live and recording features; each channel has a Direct Output which is individually switch-able pre or post fader to enable use with 16-track recording systems. The Lexicon effects work just as well in the live as well as the recording environment with a tap tempo function, 3 parameter controls, user effects settings store ability, effects clip LED and 32 powerful and editable effects to choose from.
The use of the latest PCB surface mount technology means that the Soundcraft FX16ii fits all of these features into a rugged, compact frame which can be optionally rack-mounted into a 10U space via Soundcraft FX16ii's rotating connector pod which allows cables to be connected conveniently behind the rack and save rack space.
Soundcraft FX16ii main features include:
26 inputs
16 mono microphone channels
4 stereo returns
4-bus architecture, with sub-group routable to mix
Built-in 24 bit Lexicon digital effects processor
32 FX settings
Tap Tempo
3 FX parameter adjust rotaries
User FX settings store function
Direct outputs for multi-track recording individually switch-able for pre-post-fade operation
Inserts on all mono channels
Inserts on stereo mix output
Classic Soundcraft 3-band EQ with swept mid-band
Stereo 18dB/octave 100Hz high-pass filter
Dual global +48V phantom power split channels 1-8 and 9-16
Channel Mute control
10-segment tri-coloured metering
Two sub-group outputs
Separate mono sum output
Integral universal power supply
Low-cost high-performance mixers
Key Features
6 Mono & 2 Stereo Input Channels
6x GB30 Microphone Preamplifiers
Recording and Live Sound Audio Console
Compact Mobile Enclosure
The Soundcraft EPM Series provides a straight-forward, yet professional alternative to complex audio mixers. Constructed in a 6-, 8- or 12-channel chassis, the EPM mixers are well-suited for recording and sound reinforcement applications.
The EPM 6 features 6 mono and 2 stereo input channels providing the flexibility needed to accommodate the recording studio, venue or touring musician. All mono inputs feature 1/4" phone line and balanced XLR microphone inputs. The famed GB30 microphone preamps provide the quiet, detailed signal synonymous with Soundcraft\'s large FOH consoles. The stereo inputs provide L/R 1/4" phone connections and are ideal for connecting stereo devices such as keyboards, returning effects, etc.
The EQ section features a sweepable mid-range on all mono channels and provides smooth frequency contouring. Inserts on all mono channels and stereo output enable signal routing to external signal processors. The compact profile, rich sound quality and flexibility of the EPM Series provides everything necessary for use in project recording, video editing, night clubs, bars, meeting halls, houses-of-worship, and more.
6 Mono and 2 Stereo Channels
The EPM 6 features 6 mono microphone and line input channels, 2 stereo inputs feature L/R 1/4" phone connections
Comprehensive Controls
The comprehensive layout is designed to attract users who require a straight-forward mixing environment
GB30 Microphone Preamplifiers
All 12 mono inputs feature Soundcraft\'s GB30 microphone preamps for quiet, clean large-format FOH console quality
Compact and Professional
The EPM Series consoles pack a professional feature set in a compact, mobile enclosure
Total # Of Inputs
6x Mono
2x Stereo
Mic/Line Inputs
6x Line Mono: 1/4" TRS Phone
2x Line Stereo: L/R 1/4" TRS Phone
6x Microphone: 3-pin XLR
10-Segment L/R Peak LEDs
+48 V Phantom Power LED
PFL Active LED
Power Indicator LED
Frequency Response
20 Hz to 20 kHz +/-1.5 dB
Dynamic Range
Not specified by manufacturer
Signal-to-Noise Ratio
Noise (22 Hz - 22 kHz measurement bandwidth)
Mic EIN @ max gain, 150 ohms source impedance -127 dBu
Mix @ max, faders to down
Total Harmonic Distortion (THD)
Mic sensitivity 30 dB, +14 dBu @ mix output:
MIC/LINE Input Channels The XLR microphone input is equipped with an extremely high quality, ultra-low noise, discrete preamp. The +48V phantom power for condenser microphones can be switched in groups of six. The Line Input and Channel Insert are implemented as jack sockets. The Gain can be controlled in the range 0-60 dB. The switchable Lo Cut filter (80Hz, 18dB/oct.) serves to eliminate low-frequency noise. A very typical DYNACORD feature is the asymmetrical Voicing Filter by means of which, if desired, the voice can be powerfully emphasized in the mix. Optimized for ease-of-use, the 3-band semi-parametric equalizer makes it possible even for unpracticed users to perform the requisite corrections swiftly and intuitively. With their extended buss structures, the CMS3 mixers offer very flexible configuration options. In all, 6 AUX busses are available in each case: 2 (FX) are assiged to the two effects devices; 2 (AUX) can be configured either as monitor or effects sends by means of a switch in the Main section; 2 (MON) are designed as monitor sends, each being equipped with a sweepable anti-feedback filter in the Master section. MUTE and PFL switches, each with its own LED, make it possible to mute each input channel individually and/or listen to its pre-fader signal. Each channel offers a Signal Present and Peak LED for level control. The channel faders are dust-protected and offer not only excellent crosstalk attenuation but also a practice-optimized control characteristic. All potentiometers and faders are high-quality components from ALPS. Stereo MIC/LINE Input Channels The stereo input channels are equipped in much the same way, but optimized, naturally, to carry stereo signals. Two of the four stereo inputs of each model are additionally equipped with cinch (RCA) sockets switched in parallel for CD or MP3 players. The two other stereo inputs receive in addition the four channels of the digital audio interface USB 1-2 and USB 3-4 Separate Gain controls are provided for the Stereo Line and Mic inputs to permit them to be used in parallel if desired. Three-band tone controls are provided, and a Balance control replaces the PAN control found in the mono channel strips. MASTER In the Master Section, too, the CMS3 mixers are lavishly equipped. The 11-band stereo equalizer can be routed to the Master channels or else to either or both of the Monitor Sends according to choice. The FX1+2 Returns as well as the AUX1+2 and MON1+2 Sends are on faders just like the Master L/R signal, which makes for comfortable and intuitive operation. The Master B signal is available pre or post MASTER L/R fader and can be mono-summed if desired. The Master signal is also available on the REC Send cinch (RCA) output with level control. The level meters of the CMS3 comprise two LED chains of 12 LEDs each. The display range covers 40 dB; what is shown is the level in dBu at the master outputs. When the PFL switch is activated, the left-hand LED chain shows the internal level of the master buss in dBu. The Standby switch mutes all channels e.g. during pauses, with only the 2TRACK-to-Master input remaining active for the playback of interval music. A 4-pin XLR socket is provided for the connection of a standard 12V/5W gooseneck lamp. DIGITAL USB 2.0 AUDIO INTERFACE The USB 2.0 port serves as a digital audio interface between the CMS3 and a PC or Mac. Four channels can be transmitted in either direction simultaneously. This interface can therefore be used either for the input of audio signals (e.g. for playback or interval music) or else for live- or studio-recording applications. It is configured by selecting the relevant setting in the menu. For the use of the CMS3 with a PC or Mac, a free Cubase LE license as well as the requisite USB drivers are included free-of-charge on the supplied DVD. PC MIDI Interface The CMS3 also offers a fully-featured PC MIDI interface. The MIDI input also supports the remote switching of both internal effects units using a master keyboard or MIDI footswitch. Professional Effects, OLED Display and Processing Menus The CMS3 has two integrated stereo multi-effects processors that work independently of one another, each offering 100 effects algorithms optimized for live performance, the most important parameters of which are editable. Linear 24-bit AD/DA converters and 48-bit double-precision processing guarantee the finest studio quality based on state-of-the-art technology. The 100 program locations of each device are packed with high-quality reverbs, halls and plates that deliver professional results in live performance on stage as well as in both studio and home recording environments. Other presets include Echo/Reverb and Chorus/Echo combinations, a variety of delay, flanger, chorus and doubling algorithms, as well as special reverb and delay programs. When a delay effect is active, the delay time can be synchronized to the beat of the music using the TAP key. Edited effects programs can be stored in the 20 User memories offered by each device, assigned names, and later selected and used in the same way as the presets. The large, high-contrast OLED display is easily read from a wide range of viewing angles—even in very bright surroundings. The operation of the effects units and processing menus is intuitive and made easier still through the use of soft keys and a rotary encoder. Processing Menus For the basic settings, configuration, use of the effects and special functions, a wide variety of editing options can be selected from the clearly arranged menus. Innovative Solution for Protection and Transportation Optionally available for the CMS 1000 and 1600 is a very robust plastic lid with an integrated handle—a highly innovative solution that offers optimal protection for the device as well as greater carrying comfort. For the CMS 2200, due to its greater size, a flight-case solution is recommended (available as a further option is a dust cover: the DC-PM2200-COVER). Accessories For rack installation of the CMS 1000 (or table installation of the models 1600 and 2200), the mounting kit RMK 1000-3 is available. Other accessories include the gooseneck light DC-LITLITE-4P and the DC-FS11 ON/OFF footswitch for the effects units.
Live 4-Bus Mixing Console
32 Input Channels (24 mono)
XLR Mic: 24 mono channels + 4 stereo channels
Frequency Response: 20Hz – 20kHz
Weight: 39.70 lbs (18.1kg)
Dimensions (H x W x D): 6.38" x 39.92" x 20.98" (162mm x 1014mm x 533mm)
4 Stereo Line Inputs
24 Inserts
Large Illuminated Mute Switches
Stereo inserts
4 Groups with inserts
3-Band EQ with sweepable mids
6 Aux sends
Dual DSP with 100 digital multi-effects
2 Stereo aux return
USB I/O (from aux sends or main mix)
Input gain trim on each channel
24 dB Low cut filter at 75Hz
100mm faders
PFL switches
AFL switches
Phantom power switch (+ 48V)
Mono Out & LPF with sub-woofer containing variable frequency control
2 x 12-segment LED level meter for Main L/R, PFL/AFL. Group 1–4
Talkback mic input
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.