Allen & Heath ICE-16 Multitrack recorder 16 chan.

Connect

Multiple units can be daisy-chained over the FireWire bus, or kept in sync using the DIN connectors when recording on multiple USB devices, making iCE-16 the perfect companion for both small and large analogue consoles such as our acclaimed ZED, MixWizard and GL mixers. Plug into your desk Direct Outs or use a mix of Groups and Aux sends to save on channels.

Record

The USB DRIVE is automatically detected and checked by the system. Starting the recording is as simple as pushing a button. Remove and plug the key into a computer to access or transfer the WAV files to any DAW.

Interface

Removing the USB stick or powering up the unit without one enables the USB / FireWire interface. Signals present at the inputs will be sent to the Mac or PC on channels 1-16. WDM/ASIO drivers and USB2.0 class compliance ensure full compatibility with most DAWs, including Logic, Sonar, Cubase and Pro Tools.
Play

Fancy a ʽvirtual soundcheckʼ or just need to play cues during a live gig? Tracks can be played back directly from the USB drive and full multichannel audio can be sent from the computer to the ICE-16 analogue Outputs.

Features at a glance

• XLR plug-on connection
• Compatible with dynamic mics as well as bettery-powered condenser mics
• 48kHz/24-bit linear PCM mono recording
• WAV files (compatible with BWF format)
• Media: microSD/SDHC cards (supports 32GB capacities)
• Sliding record switch and hold function to prevent misoperation during recording
• Dual recording function
• automatic file closing function to prevent the loss of already recorded data
• XLR connector also can use as external input for external input
• High/Mid/Low recording level settings
• Low-cut filter
• Limiter
• Automatic level function
• With a built-in clock function, supports BWF files that can have time information added, which is convenient for editing and searching
• Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
• Playback function allows recorded data to be checked immediately
• Headphone output
• Locking mechanism assure a tight connection with the microphone body
• Easy-to-read organic EL display
• micro USB B port enables easy data exchange with computers
• Records at least 10 hours on a single AAA battery by using alkaline batteries (EVOLTA)
• Unit settings can be created and transferred as a computer text file
• Settings can be transferred between multiple DR-10X units using the infrared transmission function
• Firmware can be updated using a microSD card
• RoHS-compliant product

The new Fostex FR-2 has been designed specifically for location sound recording; high quality sound effects acquisition; TV & radio documentary; in fact any application where quality audio recording is required.
With excellent quality (up to 24-bit / 192KHz recording - a first for a CF recorder), huge feature list and a cost-effective price point, the FR-2 offers users of portable DAT and other formats the opportunity to make the switch to a more flexible, higher quality audio acquisition machine without sacrificing features.

• Recording industry standard, PC-compatible BWF files (stereo/mono) on a FAT32 media format
• Up to 24-bit/192kHz uncompressed recording
• Includes a unique 22.05kHz sampling frequency setting for extended recording
• Records to both Type I & II CompactFlash cards and PCMCIA 1.8” hard disk drives*1
• Fostexʼs "File per Take” system with auto scene & take naming/increment
• Two balanced XLR microphone inputs with switchable phantom power and top quality, high headroom mic pre-amps
• 132 x 64 dot matrix LCD screen for ease of use & high visibility in the field
• Uses AA-sized rechargeable NiMH batteries which are widely available due to the popularity of digital cameras. 8 AA cells will provide approximately 2.5 hours operation when recording to a CF card
• Easy file transfer to PC/Mac via PCMCIA, CF adaptor or standard on-board USB connection for data editing and/or backup*2
• Quick and easy on-board file naming or via external keyboard through standard USB keyboard port
• “Pre-record” loop buffer of approximately 10 seconds*3
• Easy software update via CF or PCMCIA card with downloads from the internet
• Optional timecode generator / reader card
  
  Notes
  *1 May require software update for PCMCIA HD operation
  *2 Complies with Windows ME/2000/XP, Mac OS 10.2 or higher
  *3 Varies depending on sampling frequency“

• GENERAL
  Recording Media CompactFlash card, PCMCIA HD
  Recording Format BWF
  Number of Channels Stereo / Mono
  Sampling Frequency 22.05 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz
  Quantization 16 bit (22.05 - 48kHz), 24 bit (44.1 - 192kHz)
  
• PHYSICAL
  Power Requirement 8 x AA type dry cell (NiMH recommended)
  AC adaptor (optional)
  DC 12V
  Power Consumption approx. 5W
  Dimension 250(W) x 77(H) x 220(D) mm
  Weight 1.5kg (w/out battery)
  
• PERFORMANCE
  R/P Frequency Response 20Hz to 10kHz +/-1dB (fs: 22.05kHz)
  20Hz to 20kHz +/-1dB (fs: 44.1 / 48kHz)
  20Hz to 40kHz +/-2dB (fs: 88.2 / 96kHz)
  20Hz to 80kHz +/-3dB (fs: 176.4 / 192kHz)
  S/N (ADC-DAC, 24-bit, ref: -20dB, fs:48kHz)
  Line (input gain: +4dBu): 100dB (typical)
  Mic: (input gain: -60dBu): 87dB (typical)
  Dynamic Range 100dB (ADC-DAC, 24bit, ref:-20dB, fs:48kHz) typical
  T.H.D. (ADC-DAC, 24-bit, ref:-20dB, fs:48kHz)
  Line (input gain: +4dBu): Less than 0.005% (at 1kHz, -1dB typical)
  Mic (input gain: -60dBu): Less than 0.008% (at 1kHz, -1dB typical)
  Power Life approx. 2 hours 30 min. (8 x AA NiMH type/2300mAH)
  
• INPUT / OUTPUT CONNECTORS
  ANALOG AUDIO INPUT L/R
  Connector XLR-3-31 type (Pin2: Hot)
  Line Input Impedance : More than 6k ohm
  Reference Input Level +4dBu
  Maximum Input Level +24dBu (Trim: +4dBu, at the prefader stage)
  MIC
  Input Impedance More than 6k ohm
  Input Level -60dBu
  Maximum Input Level -40dBu (Trim: +4dBu, at the prefader stage)
  Phantom Power P48
  ANALOG AUDIO OUTPUT L(Mono)/R
  Connector RCA pin type
  Output Load Impedance more than 10k ohm
  Nominal Output Level +4dBu
  HEADPHONE OUTPUT 50 + 50mW (32 ohm)
  Max Speaker Output Level 1W
  DIGITAL INPUT/OUTPUT (except for 176.4, 192kHz)
  Connector XLR
  Input Format S/P DIF / AES/EBU automatic
  Output Format S/P DIF / AES/EBU switchable
  USB x 2 (keyboard / PC only)
  TIMECODE CARD (OPTIONAL, T.B.A.)
  LTC Input/Output LEMO
  Frame Rate 23.976/24/25/29.97DF/29.97ND/30DF/30ND
  Gen Mode 24H RUN / REC RUN / FREE RUN / EXT RUN

The Denon Professional DN-700R Network SD and USB Recorder is a 1U rack mountable recorder and audio playback device designed for installed sound applications such as houses of worship, education, and more. The unit can record to both SD/SDHC cards and USB media either one at a time for longer recording times or simultaneously to both mediums for backup. The unit features extensive DLNA/UPnp networking capabilities such as automatic or timed FTP file archiving of recorded audio with scheduled Network Timer Protocol, as well as full Web setup and control using IP. The built-in Web remote enables full control of the recorder using a mobile browser.

The front panel of the recorder features an OLED display for showing information such as time, sample rate, and file name. A set of rubberized buttons control basic functions such as record, stop, pause, play, forward, back, as well as menu control and file management functions such as move, copy, combine, divide, and undo. A shift button changes these buttons to functions such as dimming the display, marking files, record monitoring, switching to frame mode, and adjusting pitch. A rotary knob button controls recording level, recording balance, and navigates the menu settings. The front of the unit has two SD/SDHC card slots for inserting recording media with ejection buttons, as well as a USB female type A port for plugging in USB media such as thumb drives and external USB hard drives. A second USB female type A port allows you to plug in a USB QWERTY keyboard for entering file information while recording. The unit also includes a 1/4" headphone out and headphone level control knob for monitoring while recording or listening to recorded tracks.

For I/O, the back of the unit features left and right balanced analog 3-pin XLR female inputs, left and right unbalanced analog RCA inputs, a balanced digital 3-pin XLR AES/EBU input, an unbalanced digital coaxial SPDIF input, left and right balanced analog 3-pin XLR male outputs, left and right unbalanced analog RCA outputs, a balanced digital 3-pin XLR AES/EBU output, and an unbalanced coaxial SPDIF output. For remote control, the unit features both an RS-232C and a 25-pin parallel port. The included rack ears can be removed for tabletop operation.

Professional digital recording 24channel system, 24 bit/96 kHz, with hard disk drive and 24 analog in/out and 3 adat in/out