ALTO ANALOG PARAMETRIC EQUALIZER ALTO-Q

General description The Alto Q is a 5-band parametric EQ for precision frequency processing and adjustment. It delivers wide dynamic range at all frequencies, and has High and Low cut filters. Additionally, each band has a switchable bypass and is bandwidth adjustable.

5 band parametric equalizer for precision frequency adjustment
If power supply fails, bypass function will connect automatically input with output
12 segment input and output LED display
Wide dynamic range at all frequencies
High and low cut filters
Each band is able to switch for input/bypass
Each band is adjustable for bandwidth

Versatile high quality 5 - band parametric EQ with lo - cut & hi - cut filters

• Wide overlap of frequencies between bands to achieve very precise control over your sound
• Lo - cut & Hi - cut 12dB / Oct. filters to reduce unwanted sounds and noises
• Individual In / Out switches for each band to compare equalized and original signals
• Balanced Inputs / Outputs XLR & 1 / 4" TRS jacks
• Dimensions (WxDxH): 483 x 194.1 x 44mm(19" x 7.6" x 1.7“)
• Weight: 2.9kg (6.4 lb)

• Control range 6dB or 12dB selectable
• Bypass function
• Switchable Hi - pass and Low - pass filters.
• Balanced XLR, 1 / 4" TRS and RCA input and output connectors
• Signal clip LED
• Ground "LIFT" switch to disconnect signal ground from chassis ground
• Line voltage selectable (115V / 230V)
• Control Range: +/-6dB or 12dB selectable
• Inputs and Outputs: XLR, 1 / 4" TRS and RCA jack
• Inputs Impedance: 20K ohm (bal) 15K ohm (unbal)
• Outputs Impedance:
• High Pass Filter: 40Hz (12dB/oct)
• Low Pass Filter: 16kHz (12dB/oct)
• Max. Input Level: +18dBV
• Max. Output Level: +16dBV
• THD%: 0.02% (at 1kHz, all slider at center)
• Frequency Response: 20Hz to 50kHz, 3dB (all slider at center)
• S / N Ratio: 117dB
• Power Supply: AC 100V - 120V, 60Hz / AC 200V - 240V, 50Hz
• Power Consumption: 15 watts (max)

The Rane ME 15S microGraphic Equalizer is a two-channel, 2/3-octave design with 20 mm sliders in a single rack space unit. It features a Range switch for high slider resolution in the ±6 dB mode, equivalent resolution to 45 mm sliders found on the DEQ 60L. The ±12 dB mode provides a wide range of control over system audio.

The active filter sections feature Raneʼs innovative constant-Q (constant bandwidth) design. Constant-Q means the bandwidth of each individual filter is guaranteed to be narrow enough to prevent unwarranted interaction between filters, yet wide enough to produce exactly the type of correction curve demanded by even the most unusual acoustic surroundings. This differs dramatically from conventional designs of the past, encumbered with the unfortunate characteristic of changing bandwidth when changing boost/cut amounts.

Front panel controls and indicators include an overall rotary Level control for each channel as well as Overload indicators. Passive pushbutton Bypass switches feature LED indicators, avoiding ambiguity by being on when the unit is Bypassed. (A passive Bypass switch requires no power to operate. This allows completion of the audio path should power fail in the ME 15S.)

Inputs and Outputs are electronically balanced designs, capable of unbalanced operation when required. They accept and drive all possible signal levels into normal load impedances. Balanced applications choose between the XLR or 1/4" Tip-Ring-Sleeve connectors. Unbalanced sources also may tie to the ME 15S through mono 1/4" connectors (no ring connection).

• Constant-Q Bandwidth Design
• Overall Level Controls and Passive Bypass Switches
• 20 mm Filter Slide Controls with ±6 dB or ±12 dB Slider Range
• Infrasonic, Ultrasonic, & RFI Filters
• Balanced XLR and 1/4" TRS Inputs and Outputs
• Universal internal switching power supply (100-240 VAC)

• Professional 15-band stereo graphic equalizer for live and studio applications
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
• Ultra-low noise 4580 operational amplifiers for highest signal integrity
• Dedicated mono subwoofer output with adjustable crossover frequency
• Additional low-cut filter removes unwanted frequencies, e.g. floor rumble

• Highly accurate 4-segment LED output metering and input gain controls for easy level setting
• Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
• “Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
• 3-Year Warranty Program*
• Designed and engineered in Germany

* 2 channel 15 2/3 octave band graphic equalizer
* 25Hz - 16kHz frequency control * Constant Q circuitry
(3% frequency accuracy) * Selectable 6dB or 12dB control
* Variable level control * By-pass switch * Overload threshold LED (5dB below clipping) * Ground lift switch * XLR & 1/4" TRS balanced Inputs/Outputs * Power: Selectable 120V/220V voltage
* Dimensions: 1.75" H x 19" W x x 8.5" D / 44.5mm x 483mm x 216mm - 1 space r.m. * Weight: 4.5 lbs. / 2.5kg

XEQ-152 Specifactions:
* Input type: Active balanced / Unbalanced * Output Impedance:

The class-A circuit used in the EQ-73 is similar to the eq section in the classical 1073 module, without the high pass filter. Additional frequencies have been added and the mid frequency band uses two inductors, the higher value of the second one is used for the two lowest frequencies, 160 Hz and 240 Hz, to achieve a suitable response.

The sound character is warm, punchy, sweet and musical. These classic characteristics have been heard on countless recordings through the years and it is a versatile sound that works very well on most sound sources and in most genres. The essence of this sound is now available at a surprisingly low cost, making it available to nearly everyone.

The EQ-73 has stepped frequency controls that offers a wide selection of frequencies from 20 Hz to 24 kHz.

The Low and High frequency bands are shelving and the mid frequency band is of the bell type.

The control range is +/-15 dB for the two lower bands and +/- 18dB for the high frequency band.

There are separate bypass switches for all three bands.

The EQ-73 is made to be used together with one of our PRE-73 models that has an Insert jack. It can also be used with many other units that has a low level insert jack.

Combining a PRE-73 and an EQ-73, and using a UNITE rack kit to mount them together, one will get a 19-inch 1073-style unit at a low cost and with a great sound!

FEATURES

- Vintage Style electronics. No intergrated circuits in the signal path

- 3-band with a dual inductor based mid frequency band

- Stepped frequency selection

- A wide selection of frequencies from 20 Hz to 24 kHz

- Control range up to +/- 18 dB

- Separate Bypass switches for each band

- Tantalum capacitors in the signal path

- Made to be used together with one of our PRE-73 models with an Insert jack or any other unit with a low level Insert jack

- TRS jack for in-and output connection, the nominal working level is around 18 dBu

- Selectable ground lift switch

- External power supply to avoid interaction with the audio circuits

- Great sound that suits most sound sources and genres

- A solid build quality that will last many years of normal use

iEQ-15 Dual 15-Band Graphic EQ with Type V? NR and AFS?

With an EQ heritage that has produced countless industry standard
patents and dates back more than 30 years, the dbx iEQ-31 easily
lives up to the dbx legacy of uncompromised sonic integrity. In
addition to unsurpassed equalization specs, the iEQ-15 also offers
the built-in necessities which include AFS? feedback Suppression,
Type V? noise reduction and PeakStopPlus? limiting. Besides
including two 15-band channels of 2/3-octave equalization, the iEQ-15
also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut
range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs,
nonconductive nylon sliders; and an intuitive user interface with comprehensive
output and gain reduction metering. As always, the inevitable result of our
meticulous attention to detail and top-quality componentry is exceptional
sound, performance, and reliability.

The iEQ series represents a major step forward in the performance of EQs.
The iEQ series is now able to offer state-of-the-art digital EQ performance
and specs with an analog look and feel. From its amazing 10Hz to 22kHz
frequency response, to its 113dB dynamic range and Advanced Feedback
Suppression (AFS?), dbx proprietary Type V? noise reduction
and PeakStopPlus? limiting, the iEQ-15 offers out of this world specifications
with a downto- earth price point. Sure to find a home in the studio, on tour and
with installed sound venues, the iEQ-15 is destined to take its rightful place in
the lineage of great dbx? signal processors that are the professional?s choice
in signal processing. With such pristine design and quality, the iEQ-15 offers
the maximum sonic flexibility in a straight forward interface and rock-solid construction.

  
? Advanced Feedback Suppression (AFS?)

? Type V? Noise Reduction

? PeakStopPlus? Limiting

? 2/3-octave Constant Q frequency bands

? Switchable boost/cut ranges of ±6 or ±15dB

? 18 dB per octave 40Hz low-cut filter

? ±12dB input gain range

? XLR, TRS and Euroblock Inputs and Outputs

? Internal Toroidal Transformer

? Frequency Response of 10Hz to 22kHz

? Dynamic range of greater than 113dB

? User Power Up Features

? Relay Bypass for Power Failure System Protection