ALTO DI-4 DI BOX 4-CHANNEL (RACK)

No longer available!

106.70 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: DI-4 Category:
4 – Channel Direct Inject Box Accepts direct connection to up to 3000 Watts outputs for speakers Prevents hum and noise pick up due to special transformer decoupling Converts unbalanced line inputs to balanced outputs 20 dB gain switch for preamplification of low level signals Phase Reverse switch allows you to instantly correct phase problems Switchable […]

 

Read more

4 – Channel Direct Inject Box

  • Accepts direct connection to up to 3000 Watts outputs for speakers

  • Prevents hum and noise pick up due to special transformer decoupling

  • Converts unbalanced line inputs to balanced outputs

  • 20 dB gain switch for preamplification of low level signals

  • Phase Reverse switch allows you to instantly correct phase problems

  • Switchable high cut filter (8kHz) for guitar applications

  • Accurate eight – segment LED level meter simplifies level setting for optimum performance

  • Gold-plated XLR connectors and 1/4″ TRS connections for input and link output

  • Switchable attenuation switches allowing up to 40dBu attenuation

  • Illuminated switches enable you perfect operation in dark stage environments

  • Dimensions (WxDxH): 483 x 197.5 x 44.2mm (5.0″ x 7.8″ x 1.7“)

  • Weight: 3.7kg (8.2 lb)

Weight 3.70 kg

Reviews

There are no reviews yet.

Be the first to review “ALTO DI-4 DI BOX 4-CHANNEL (RACK)”

Your email address will not be published. Required fields are marked *

Quick Comparison

ALTO DI-4 DI BOX 4-CHANNEL (RACK) removeBEHRINGER DI400P High-Performance Passive Direct Injection Box removePALMER AUDIO PAN02 TOOLS Active DI-box removeSTEWART ADB4-4 CH. ACTIVE D.I BOX removeBSS AR-133 ACTIVE DI BOX (Battery/ Phantom Powered) removeOMNITRONIC LH-065 ACTIVE D.I BOX remove
NameALTO DI-4 DI BOX 4-CHANNEL (RACK) removeBEHRINGER DI400P High-Performance Passive Direct Injection Box removePALMER AUDIO PAN02 TOOLS Active DI-box removeSTEWART ADB4-4 CH. ACTIVE D.I BOX removeBSS AR-133 ACTIVE DI BOX (Battery/ Phantom Powered) removeOMNITRONIC LH-065 ACTIVE D.I BOX remove
Image
SKUDI-4E005867PAN02ADB4EAR-133LH065
Rating
Price 106.70 incl. GR VAT 33.00 incl. GR VAT 68.20 incl. GR VAT 585.13 incl. GR VAT 159.00 incl. GR VAT 77.67 incl. GR VAT
Stock

Out of stock

In stock

Only 2 left in stock (can be backordered)

Available on backorder

Only 5 left in stock (can be backordered)

In stock

AvailabilityOut of stockIn stockOnly 2 left in stock (can be backordered)Available on backorderOnly 5 left in stock (can be backordered)In stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

4 - Channel Direct Inject Box

  • Accepts direct connection to up to 3000 Watts outputs for speakers
  • Prevents hum and noise pick up due to special transformer decoupling
  • Converts unbalanced line inputs to balanced outputs
  • 20 dB gain switch for preamplification of low level signals
  • Phase Reverse switch allows you to instantly correct phase problems
  • Switchable high cut filter (8kHz) for guitar applications
  • Accurate eight - segment LED level meter simplifies level setting for optimum performance
  • Gold-plated XLR connectors and 1/4" TRS connections for input and link output
  • Switchable attenuation switches allowing up to 40dBu attenuation
  • Illuminated switches enable you perfect operation in dark stage environments
  • Dimensions (WxDxH): 483 x 197.5 x 44.2mm (5.0" x 7.8" x 1.7“)
  • Weight: 3.7kg (8.2 lb)
Behringer DI-400P High-Performance Passive Direct Injection Box Introducing the Ultra-Compact DI-Boxes from BEHRINGER There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal. The DI400P lets you connect instruments or amplifier outputs. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies. This is the sort of medicine that?ll cure headaches in your studio or on stage.Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.

You're serious about getting rid of all that excess noise on stage, but you've got so many line
instruments you don't know where to start. The ADB-4 from Stewart can take care of all your
high impedance problems. The ADB-4 is 4 active direct boxes, all in a module that only takes
up half a space on your keyboard rack. It's a rugged, durable piece of equipment that packs a
lot of DI power.

? Requires phantom power or 9v battery
? Ground lift switch
? Instrument or speaker level switch
? Transformerless
? Can be used with amp up to 400w
? RF shielding

With added functionality and enhanced audio performance, the AR-133 has been designed to be more affordable for musicians, studios and PA companies. The unit includes phantom power and battery supplies as standard. Should the phantom power from the console fail or be accidentally switched off, the AR-133 automatically switches over to the internal 9V battery providing uninterrupted use. The unit is housed in a rugged aluminium extrusion case, with robust polyurethane end-cheeks which give the AR-133 a very distinctive look. Input connectors are both 1/4" jack sockets and an XLR socket, the latter meaning that the AR-133 can be used to convert unbalanced signals to a balanced output on XLRs throughout. The arched case allows cables to run back underneath the unit from the end for neat cable management. Input attenuation is 0, -20 or -40dB, making the box suitable for instrument, line or amplifier levels on inputs. On the output side, a ground-lift switch is provided for quick solutions to ground-loop problems. The AR-133 uses an enhanced version of the same audio path as the AR-116, now regarded by many people as a reference standard. The sound quality is legendary, particularly on acoustic and bass guitars. Numerous applications can be satisfied by the AR-133. For example, as well as the traditional guitar use, the AR-133 can be used with keyboards, DJ consoles, amplifier outputs, and other electronic sources.An additional bonus is the ability to use the AR-133 as an active balancing device. Input Section Input Impedance  1M Ohm (pad at 0dB) 47k Ohm (pad at -20dB) 47k Ohm (pad at -40dB) Max Input Level +9dBu (pad at 0dB) +29dBu (pad at -20dB) +49dBu (pad at -40dB) Connectors  Two Parallel 1/4" jack connectors and a parallel XLR connector (unbalanced) Jack:  Tip Hot (+ve) Sleeve Ground XLR: Pin 2 Hot (+ve) Pin 1 & 3 Ground Output Section Output Transformer Balanced Max. Output Level  +8dBu into 600 Ohms or greater Connector  XLR3-32 or equivalent System Performance Distortion (THD)  < 0.005% at 1khz, 0dbu output Noise  < -105db unweighted, 22hz-22khz, rms* Frequency Response 30Hz to 20kHz, +0dB/-1dB General Main/Standby battery 9 volt PP3 type, preferably alkaline. Current drain  on phantom - less than 7.5mA on battery - less than 2mA. Phantom Power  +20 volts DC to +48 volts DC Weight 650 gms, excluding batteries. Overall Dimensions  59 mm x 124 mm x 143 mm (2.3" x 4.9" x 5.6“)
Weight3.70 kg0.20 kg0.31 kg0.50 kg0.65 kg0.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.70 kg
Weight 0.20 kg
Weight 0.31 kg
Weight 0.50 kg
Weight 0.65 kg
Weight 0.80 kg