Content |
Everyone deserves a reliable studio monitor that will reproduce every detail of the music they are working with. Alto approached this challenge using high quality components to obtain an extended frequency response, and they included their original near or far field configuration switch to allow you to precisely install the monitor so you can obtain from it a very well tailored behavior! The very compact size makes these monitors very useful for all environments, from professional studios to lap-top studios!
- High performance 1" silk dome tweeter
- (2)4" woofers
- Near-field / Far-field behavior switch
- Nominal Impedance: 4 ohms
- Power handling: 70W AES
- Sensitivity: 92dB (1W/1m)
- Max SPL: 110dB
- Shielded magnets
|
Mini Monitor Speaker Metal cone loudspeakers Power: 200 WRMS Frequency response: 65Hz-22KHz Sensitivity: 88db Height 30cm Impact resistance: 8Ω Color: Black
|
One 1" pure aluminum dome tweeter.
Two 5-1/4" BDSS cast basket drivers pressure coupled
to one 6“x12" low bass radiator.
Freq. Response: 30 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 92 dB.
Rec. Ampl. Power: 20 - 300 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 41.2 x 20 x 38.4 cm.
Weight: 9.9 kg each.
|
ME 160
Enclosure Bass reflex type Power Handling Capacity Continuous pinknoise: 150W Rated Impedance 6 ohms Sensitivity 88dB (1W, 1m) Frequency Response 50 ? 20,000Hz Crossover Frequency 2,000Hz Speaker Component 16cm resin-impregnated natural fiber cone woofer (magnetically shielded) 2.5cm soft-dome type(magnetically shielded) Input Terminals Screw terminals (compatible with a dual-banana plug), gold plated Finish Enclosure: MDF, black, paint Front grill: Cloth, black Dimensions 216 (W) ? 376 (H) ? 244 (D) mm Weight 7.5kg (per unit) Mounting Brackets (option) WCB-31, CMB-31
|
The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.
FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling
SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz) 106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)
|
One 1" pure aluminum dome tweeter.
One 6-1/2" BDSS cast basket driver pressure coupled
to one 6“x10" low bass radiator.
Freq. Response: 32 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 90 dB.
Rec. Ampl. Power: 20 - 225 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 32.9 x 20 x 31 cm.
Weight: 7 kg each.
|
Reviews
There are no reviews yet.