Content | The American DJ H2O LED uses a super bright 10W LED light source to produce a water flowing effect in orange, green, blue, yellow and white. It is designed to be projected on walls, ceilings or floors with or without fog to produce a great mood effect. Also, don't worry about the lamp burning out in the middle of an event because this 10W LED source is rated to last an outstanding 30,000 hrs.
H2O LED Features:
• Bright 10W LED simulated water flowing effect
• Designed to project on walls, ceilings or floors with or without fog – great for mood or background lighting
• Equipped with 2 glass effect wheels and 1 independent dichroic color wheel
• 6 colors: Orange, Green, Blue, Yellow, Purple and White
• High-tech plastic molded ends protect unit during transport and day-to-day use
• Manual focusing lens
• 2 operational modes: seamless scrolling colors or single color operation
• Beam angle: 34 degrees
• Includes hanging bracket
• Run all night – units stays cool – no duty cycle
• Power consumption: 22W
• Long life 10W LED (30,000 hr. rating)
• Switchable voltage: 115V/60Hz or 230V/50Hz (IEC Plug)
• Dimensions (LxWxH): 8.75”x9”x7.5” / 222x229x187mm
• Weight: 8 lbs. / 4 kg.
The H2O IR from American DJ is a 12W LED multi-colored simulated water-flowing lighting effect. It can be used in several environments for applications such as nightclubs, bars, restaurants, live shows, museums, and more.
The H20 IR produces almost no heat, requires very little power (23.8W max), has an LED rated at 30,000 hours, and has no duty cycle, allowing it to run all night long without issue. Two interchangeable lenses allow for the beam angle to be set to either 34 or 43°, depending on the intended application. The H20 IR is also compatible with the ADJ UC IR wireless remote (sold separately).
Finally, there is no end to the applications for the H20 IR. Water-flowing effects can add a unique visual dimension to any display or special event. It may be used with or without fog.
| Multicolored simulated water-flowing effect with low power consumption.
The American DJ H2O LED Pro is a multicolored simulated water-flowing effect with DMX-512 control and a bright, 50W LED source. This Pro version offers professional features such as: full DMX control of the glass wheel, color wheel and dimming, and a 4-button DMX display. It operates in 3 different modes (DMX, Sound Active, and Master/Slave) or can be managed via the easy-to-use UC3 controller (sold separately. The unit comes equipped with two interchangeable lenses (34° and 52°) depending on how wide of a beam is required for your event. You can also daisy-chain up to 5 units together not only through the XLR DMX links, but through the IEC In/Out power links as well.
The unit produces almost no heat, requires very little power (69W max.), and can be used all night long. The LED is rated at 30,000 hours of use.
Thereʼs no end to applications for the H2O LED Pro. Water flowing effects can add a unique visual dimension to nightclubs, bars, restaurants, shows, music performances, and even displays and special events. Use it with or without fog and you'll still be amazed at the results.
Features
Bright 50W LED source simulated water flowing effect
Designed to project on walls, ceilings, or floors with or without fogUse for mood or background lighting
3 DMX channels (Dimming, Glass Wheel, Colors)
3 operational modes: DMX, Sound Active, and Master/Slave
Digital DMX display with 4-button menu for easy navigation
Equipped with 2 Glass Effect Wheels and 1 Independent Dichroic Color Wheel
6 dichroic colors: orange, green, blue, yellow, purple, and white
High-tech plastic molded ends protect unit during transport and day-to-day use
0-100% dimming (via DMX)
Adjustable focusing lens
Beam Angle: 34° or 52° (Includes 2 replaceable lenses to change beam angle)
Includes hanging bracket
Run all night as unit stays cool with no duty cycle
IEC In & Out to daisy-chain power (Connect up to 5 H2O DMX PRO)
1/4" input for optional UC3 remote control (sold separately)
Fan cooled
H2O DMX Pro Water Effect Specifications:
Power consumption: 69W
LUX @ 3M: 1800 (34° lens), 1100 (52° lens)
Long-life 50W LED source (30,000 hr. rating)
Multi-voltage operation: AC 120-240V 50/60Hz (IEC Plug)
Dimensions (LxWxH): 11.5" x 8.75" x 4.75" / 292mm x 236mm x 121mm
Weight: 9lb. / 4kg | Features:
1.Strobe effects, red, green and blue three colors change.
2.Its light spot on the wall, the effect likes glass ball, very bright and powerful.
3.Control mode: Auto, voice-activated,MP3.
4. Good quality warranty, we check and test it one by one,safe and reliable.
5.Long working life, excellent stability,small and exquisite appearance.
6.Suitable for disco, ballroom, KTV, bar, stage, club, party ,wedding etc.
Specification:
Lighting color: RGB, 6X3W, red,green,blue,yellow,white,purple
Shell material: Plastic
Light power: 10-25W
Light Source: 6x3w led
Light angel: 120 degree
Working mode: automatic or sound control
Motor: stepping motor
Input: AC 110-240V/50-60Hz
Product size: Approx: 6.3* 7.87 inch (16cm*20cm) |
The Raptor is a powerful mid-air performer that creates a dynamic, eye-catching show with more than 70 ever-changing light beams.
* 250 W halogen lamp
* 1000 hour lamp included
* 9 gobos
* Colored dichroic glass paddlewheel
* 70 ever-changing, moving, colored light beams
* Safety approvals CE
* Rigorously tested for total reliability
* Music triggered
* Continuous operation - no cool down time needed
|
EUROLITE, FIB-203 LED fiber light, Valokuitunippu 1x 3W White LED
The imagination will know no limits!
- Whether as a starry ceiling, firework display, or as a unique curtain of light, the decorating possibilities are endless
- Fibre optic strands are bundled together and attached onto an illuminator
- Light is transmitted along the length of the fibres to shine at the tips
- The 1x3W LED in the illuminator provides color changing effect
- Color change speed adjustable via rotary-control
- Innumerable uses: Christmas, party and holiday lighting
- Advantages of LED-technology: extremely long life, low power consumption, minimal heat emission, defacto maintenance free with brilliant light radiation
- Power supply 230V via enclosed power unit
- For indoor use only
Technical specifications
Power supply: 230 V AC, 50 Hz ~ (via enclosed power unit)
Power consumption: 3 W
Fibre optic strand length: 2 m
Number of fibre optic strands: 200 pcs.
Number of LEDs: 1x3W white LED
Illuminator dimensions (LxWxH): circa 150 x 70 x 57 mm
Weight: circa 1.2 kg | Offering impressive coverage thanks to its 48 lenses, the Mini Dekker is an inventive LED fixture that produces RGBW-colored effects that shoot out in every direction to create a moving galaxy of ultra-bright beams. With a powerful light source consisting of two 10W quad-color LEDs, the beams generated by the Mini Dekker are powerful and varied in color, creating a lightshow that leaves audiences awestruck and venues radiating pure lighting excitement.
Users have five operational modes to choose from: Sound Active, Static Color, DMX-Controlled, Color Change and Color Fade (both with and without strobe). With an 8-channel DMX mode, users can also get more creative with the Mini Dekker, programming its strobe effects and multi-color beams to add increased energy to their displays.
Weighing just 4 lbs. (1.7kg), the Mini Dekker, much like the other Startec Series fixtures, is ideal for taking on the road as part of a more extensive setup, making it particularly well-suited to mobile DJs and touring bands as well as small venues.
Specifications
• DMX-512 LED effect that produces RGBW (red, green, blue & white) colored beams from 48 lenses • Features 2 bright 10-watt RGBW Quad LED’s • Light in weight and portable for entertainers on the go! • Strobe effect • 7 Operating Modes: Color Change, Color Fade, Color Change w/ Strobe, Color Fade w/ Strobe, Sound Active, Static Color, & DMX Control • DMX-512 protocol • 4-button DMX LED menu • 8 DMX Channels • Stand Alone or Master/Slave Configuration • Adjustable sound active sensitivity dial • Includes hanging bracket • Run all night – no duty cycle • Power consumption: 25W maximum • Integrated 3-pin XLR In/Out connections to daisy-chain up to 16x Mini Dekker fixtures • Long life LEDs (50,000 hr. rating) • Multi-voltage operation: AC 100V-240V 50/60Hz • Dimensions per unit (LxWxH): 7.75” x 7.5” x 9.75” / 197x184x245mm • Weight (per unit): 3.74 lbs. / 1.7kg.
|
Reviews
There are no reviews yet.