APEX ARGOS SOUND LEVEL CONTROLLER

No longer available!

1,680.20 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: ARGOS SOUND LEVEL Category:
With its concealed, authority seal-able and straightforward set-up controls, you’ll be able to quickly protect hearing and the environment, either on the road or in fixed installations. The Argos front panel clearly displays the level reduction applied. You can choose between different 3 modes of operation: use the measurement microphone provided, the line inputs or […]

 

Read more

With its concealed, authority seal-able and straightforward set-up controls, you’ll be able to quickly protect hearing and the environment, either on the road or in fixed installations. The Argos front panel clearly displays the level reduction applied.

You can choose between different 3 modes of operation: use the measurement microphone provided, the line inputs or the power amplifier inputs as level measurement reference.

Argosʼ unique servo-loop circuitry will preserve the whole audio signal quality and the entire dynamic range of the sound programme. Its unique silence detector makes it an indispensable tool for live music performance as well as interrupted recorded music, it will prevent pumping artefacts when the signal returns.

Configuring the Argos in fast mode and connecting it directly to your power amplifiers output, in parallel with the speakers, will protect your sound system against dangerous DJs, hard-rockers and extensive repair bills.

Use the Argos together with the Apex Hera, they will be your neighbours dream team !
Application

    Directive 2003/10/EC “Noise at work“
    fixed installation: bar, theatre, concert venue, …
    on the road: mobile DJ, live concert, …
    sound or broadcast studio to limit the sound level on monitor system

Features

Key features

    affordable price
    unique servo loop circuit allowing smooth operation (no compression or limiting artefacts in sound)
    proven to be most natural sounding leveller
    unique silence detection function with gain reduction hold circuit (avoiding pumping effect when sound comes back after a silence), ideal for live band
    3 sound level detection modes: microphone, line or loudspeaker
    direct connection to power amplifier output and fast operation mode allowing use as speaker protection
    may work independently or combined with the Apex Hera to increase the functions and capabilities

General features

    choose between smooth and fast operation
    sound level and gain reduction indicators
    concealed and authority seal able set-up controls
    the ‘Test’ button on front panel confirms the correct installation by muting the audio signal
    choice between A-weighted and C-weighted filters
    built-in pink noise generator for calibration
    balanced 3-pin XLR and RCA (cinch) connectors at inputs and outputs

Specifications

Input / Output
– Electronically balanced / floating
– RF suppression with LC filters
– Maximum level: +24 dBm
– Impedance: 10KOhm / 100 Ohm
XLR-3 type connector
connections: 1 ground, 2 hot (+), 3 cold (-)

Audio Specifications
– Frequency response: 10Hz – 40kHz + 0,2 dB
– TND + Noise:

Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “APEX ARGOS SOUND LEVEL CONTROLLER”

Your email address will not be published. Required fields are marked *

Quick Comparison

APEX ARGOS SOUND LEVEL CONTROLLER removeBEHRINGER DCX2496 PRO Ultra High-Precision Digital 24-Bit-96 kHz Loudspeaker Management System removeDBX ZONEPRO 1260 12IN-6OUT DIGITAL ZONE PROCESSOR removeOMNITRONIC DXO-48E Digital Controller - stereo active crossover 4 inputs - 8 outputs, incl. software removeDBX AFS2 2-Channel Digital Anti-Feedback Processor removeDBX 234XS Stereo 2-Way Mono 3-Way Crossover remove
NameAPEX ARGOS SOUND LEVEL CONTROLLER removeBEHRINGER DCX2496 PRO Ultra High-Precision Digital 24-Bit-96 kHz Loudspeaker Management System removeDBX ZONEPRO 1260 12IN-6OUT DIGITAL ZONE PROCESSOR removeOMNITRONIC DXO-48E Digital Controller - stereo active crossover 4 inputs - 8 outputs, incl. software removeDBX AFS2 2-Channel Digital Anti-Feedback Processor removeDBX 234XS Stereo 2-Way Mono 3-Way Crossover remove
Image
SKUARGOS SOUND LEVELE005260DBX ZONEPRO 1260DXO-48EDBX AFS2DBX 234XS
Rating
Price1,680.20 incl. GR VAT 395.00 incl. GR VAT 1,150.00 incl. GR VAT 590.00 incl. GR VAT 398.00 incl. GR VAT 306.06 incl. GR VAT
Stock

Out of stock

In stock

Available on backorder

Only 3 left in stock (can be backordered)

Only 2 left in stock

Available on backorder

AvailabilityOut of stockIn stockAvailable on backorderOnly 3 left in stock (can be backordered)Only 2 left in stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Flexible routing configurations for all standard mono and stereo output operating modes
  • 4 analog inputs and 8 analog outputs (XLR)
  • Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
  • Incl. software editor (for PC and Mac) for remote control via computer through USB interface: store, transfer, and manage your presets
  • Up to 30 user presets storable in the device via software
Content

With its concealed, authority seal-able and straightforward set-up controls, you'll be able to quickly protect hearing and the environment, either on the road or in fixed installations. The Argos front panel clearly displays the level reduction applied.

You can choose between different 3 modes of operation: use the measurement microphone provided, the line inputs or the power amplifier inputs as level measurement reference.

Argosʼ unique servo-loop circuitry will preserve the whole audio signal quality and the entire dynamic range of the sound programme. Its unique silence detector makes it an indispensable tool for live music performance as well as interrupted recorded music, it will prevent pumping artefacts when the signal returns.

Configuring the Argos in fast mode and connecting it directly to your power amplifiers output, in parallel with the speakers, will protect your sound system against dangerous DJs, hard-rockers and extensive repair bills.

Use the Argos together with the Apex Hera, they will be your neighbours dream team !
Application

    Directive 2003/10/EC "Noise at work“
    fixed installation: bar, theatre, concert venue, ...
    on the road: mobile DJ, live concert, ...
    sound or broadcast studio to limit the sound level on monitor system

Features

Key features

    affordable price
    unique servo loop circuit allowing smooth operation (no compression or limiting artefacts in sound)
    proven to be most natural sounding leveller
    unique silence detection function with gain reduction hold circuit (avoiding pumping effect when sound comes back after a silence), ideal for live band
    3 sound level detection modes: microphone, line or loudspeaker
    direct connection to power amplifier output and fast operation mode allowing use as speaker protection
    may work independently or combined with the Apex Hera to increase the functions and capabilities

General features

    choose between smooth and fast operation
    sound level and gain reduction indicators
    concealed and authority seal able set-up controls
    the 'Test' button on front panel confirms the correct installation by muting the audio signal
    choice between A-weighted and C-weighted filters
    built-in pink noise generator for calibration
    balanced 3-pin XLR and RCA (cinch) connectors at inputs and outputs

Specifications

Input / Output
- Electronically balanced / floating
- RF suppression with LC filters
- Maximum level: +24 dBm
- Impedance: 10KOhm / 100 Ohm
XLR-3 type connector
connections: 1 ground, 2 hot (+), 3 cold (-)

Audio Specifications
- Frequency response: 10Hz - 40kHz + 0,2 dB
- TND + Noise:

Behringer DCX2496 Overview The DCX2496 ULTRADRIVE PRO from Behringer is a digital loudspeaker management system, that provides excellent audio quality, along with a comprehensive feature list. It allows for precise set-up of multiple loudspeaker arrays, suitable for live sound, fixed installations that require control of loudspeaker systems, and other contractor-installed applications. Each of the three-inputs and six-outputs have fixed processing blocks, including gain, delay, EQ and dynamic EQ on the input channels, and gain, crossover, EQs, limiter and delays on the output side. One of the inputs can accept a stereo AES/EBU digital signal. An integrated sample rate converter assists in accepting various sample rates. Additionally, an internal input-sum signal is easily set-up. Four different mono and stereo output operating modes are available, all with individual crossover filter types with selectable roll-off characteristics. Input and output delays allow for time adjusting signals to compensate for ambient temperature changes or for adjusting arrival time differences for individual speaker clusters. EQs can be used for both musical enhancement or for level-dependent equalization. Brick-wall limiters guarantee speaker protection. Remote control of one or several units can be accomplished utilizing downloadable software for a Windows based computer. Set-ups can be saved to the software, or to an optional PCMCIA card for the ultimate in portability. Servo-balanced, gold-plated XLR connectors for all inputs and outputs guarantee excellent connectivity.
  • Three-input, six-output loudspeaker management system
  • Four different mono- and stereo-output operating modes
  • Individual crossover filter types including Butterworth, Bessel and Linkwitz-Riley, with selectable roll-off characteristics from 6dB to 48dB per octave
  • Choice of high-, band- and low-pass filters for each input and output
  • Dynamic EQ for level-dependent equalization and parametric EQ selectable for each channel
  • “Zero" attack limiters on all output channels for optimal signal protection
  • Automatic or manual-adjustable delays for all inputs and outputs allow for adjustment due to room temperature, phase and arrival time differences
  • Link option via RS-485 network interface allows for linking multiple units for larger installation requirements
  • Downloadable software enables single- or multiple-unit remote control utilizing a Windows based computer
  • Sixty user-defined internal presets can bestored via software or on a PCMCIA card
  • Internal universal power supply allows the unit to operate virtually anywhere
Frequency Response 10Hz to 35kHz, -1dB
Dynamic Range 109dB
Input Connections 3 x XLR
Output Connections 6 x XLR
Input Impedance 20kΩ @ 1kHz
Output Impedance 160Ω @ 1kHz
Maximum Input Level +22dBu
Maximum Output Level +22dBu
Sample Rate 32kHz to 96kHz
RTA Mic Phantom Voltage +15V
Crosstalk (Main Outputs) -100dB @ 10dBu In
THD & Noise 0.007% @ 0dBu In
Dimensions 19" x 8.5 x 1.75" (483 x 217 x 45mm)
Weight 6.6 lbs (3 kg)

With 12 inputs and 6 outputs and Ethernet control the dbx ZonePro? 1260 and 1261
are the newest members of the ZonePro? family providing a complete suite of signal
processing and control for Commercial Audio applications.
Designed to offer superior system sonic performance and flexibility, the 1260/1261 deliver
the highest quality tools available. Even the input and outputs connectors were chosen for
their standard usage and reliability. The ZonePro products offer Euroblock connectors for
balanced signals and RCA connectors for interfacing with consumer equipment often used
in commercial applications; there is also a simple analog input buss that allows inputs to be
sent from one unit to the next for unit and job scalability. The 1260 and 1261 provide every
necessary processing tool, from the input processing like gain control and EQ available on all
inputs to highly sophisticated and specific functions such as selectable paging microphone
processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback
Suppression. The heart of the ZonePro products is the Routing module that provides of course
Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs
also offer a wealth of processing designed for commercial applications like our patent-pending
AutoWarmth? function that was co-developed with JBL to provide natural low frequency extension
at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay
for system optimization. With the ZonePro? every tool is at your disposal to maximize the response
of your system.
Beyond processing, the ZonePro? products offer multiple forms of control to further extend the
versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user
functions like source select and volume control to advanced system control including a built-in
Real Time Clock that can provide programmable system changes throughout the day or week.
For system setup and monitoring the ZonePro Designer software provides an intuitive interface
and a speedy setup Wizard for configuring and editing all system parameters. The addition of
Ethernet control means that not only will it work with standard network equipment, but it can also
be accessed from remote dialup locations or from wireless access points.
The ZonePro? 1260 and 1261 will take your Commercial Audio system to the next level with advanced
processing, versatility and control.
 
? Advanced Feedback Suppression (AFS?)
? Autowarmth?
? Auto Gain Control
? Compression
? Limiting
? Noise Gating
? Notch Filtering
? Bandpass and Crossover Filters
? Parametric EQ
? Security Lockout
? Wall Panel Control
? RS-232 Control
? IEC, UL and CSA Approvals
 
ZonePro? 1260/1261 Specifications    
      
ANALOG INPUT
Number of Inputs:
12 Total (2) Switchable mic or line, (8) RCA, and (1)
S/PDIF
Connectors:
Euroblock (Line and Mic) RCA (Source)
Type:
Impedance (Euroblock):
> 50kΩ Balanced, >25kΩ Unbalanced, RF Filtered
Impedance (RCA):
>25kΩ Unbalanced, RF Filtered
Max input line level:
+20dBu Mic/Line, +12dBu RCA
CMRR:
> 40dB, typically >55db @ 1kHz
Mic Pre gain:30 to 60dB
Mic EIN:
> 118dB, 22Hz-22kHz, 150Ω Source Impedance
Mic Phantom Power:
15V
 
ANALOG OUTPUTS
Number of Outputs 6
Connectors: Euroblock
Type:
Electronically balanced, RF filtered
Impedance:
120 ohms balanced, 60ohm unbalanced
Max Output Level: +20dBu
 
A/D PERFORMANCE
Type:
dbx Type IV? conversion system
Dynamic Range line:
>113 dB, A-weighted, >110 dB unweighted
Type IV dynamic range:
>119 dB, A-weighted, 22kHz BW
>117 dB, A-weighted, 22kHz BW
Sample Rate: 48kHz
 
D/A PERFORMANCE
Dynamic Range:
112 dB A-weighted, 109dB unweighted
 
SYSTEM PERFORMANCE
Dynamic Range:
>110 dB A-weighted, >107dB unweighted
THD+N:
0.003% typical at +4dBu, 1kHz, 0dB gain
Frequency Response:
20Hz - 20kHz, +/-0.5dB
Interchannel Crosstalk:
>80dB typical
Crosstalk input to output:
>80dB
Propagation Delay
0.6 msec
 
POWER REQUIREMENTS
Operating Voltage:
100-240 VAC, 50/60Hz
Power Consumption:
27 Watts
 
Physical:
Weight:
6.8 lbs.(3.1 kg) Shipping weight 8.8 lbs. (4.0 kg)
Dimensions:
1.75? H x 5.75? D x 19? W

Digital stereo active crossover with 4 inputs and 8 outputs, incl. software .

  • Flexible routing configurations for all standard mono and stereo output operating modes
  • 4 analog inputs and 8 analog outputs (XLR)
  • Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
  • Incl. software editor (for PC and Mac) for remote control via computer through USB interface: store, transfer, and manage your presets
  • Up to 30 user presets storable in the device via software
  • 5 menu languages selectable (German, English, French, Spanish, Dutch)
  • Alphanumeric LCD screen with 2 lines of 16 characters each
  • Input sensitivity digitally adjustable
  • Inputs and outputs with 4-digit LED level meter as well as clip and limit LED indicator
  • Mute switch with LED indicator per output
  • 7-band parametric EQ per output
  • Up to 7 ms signal delay adjustable for the outputs
  • Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
  • Switchable phase
  • Lock function for prevents undesired changes to settings
  • Rack installation, 1 U
  • Windows XP, Vista, 7, 10 and Mac OS X 10.5.8 and better
  • Digital signal processor
  • The device can be connected via USB to the PC in connection with DXO Software The firmware can be updated via the PC connection
  • (19") 48.3 cm rack installation 1 U
Power supply: 100-240 V AC, 50/60 Hz 6 V DC 800 mA
Power connection: Mains input via Coaxial power connector (M) power supply cord with AC adapter (provided)
Frequency range: 10 - 22000 Hz
THD: <0,005 % at 1 kHz
DSP: Digital signal processor
Crossover frequency: 20-20000 Hz
Impedance: Input 10 kOhm Output 50 Ohm
Gain: Output: -50 dB to +12 dB
Filter: Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct
Delay: 0 - 7 ms
Dynamic range: Input: 114 dB Output: 110 dB
Sample rate: 48 kHz
Connections: Input: line via 4 x 3-pin XLR Output: line via 8 x 3-pin XLR
Max. level: Input: +22 dBu Output: +9 dBu
USB port: Typ B
PC connect: DXO Software via USB, firmware can be updated
Housing design: (19") 48.3 cm rack installation 1 U
Dimensions: Width: 48,3 cm Depth: 22,3 cm Height: 4,45 cm
Weight: 1,90 kg
 
Advanced Feedback Suppression Processor with Full LCD Display The AFS2 Dual-Channel Advanced Feedback Suppression Processor from DBX protects your ears and audio equipment from annoying and potentially damaging audio feedback without altering your sound. The AFS2 features application-specific filter types for speech, music low, music medium, and music high. The 24 fixed or live narrow-band notch filters are capable of removing frequencies at 1/80 of an octave, ensuring an optimal frequency response without the possibility of feedback. The front panel features the wizard function to take the guesswork out of setting up any room by incorporating an advanced feedback suppression module and providing a full LCD display for system settings and menus. Additionally, the AFS2 offers a five-segment LED for accurately monitoring input levels for each channel, while the notch filter indicator allows you to monitor the number of filters applied. Dedicated bypass buttons are included to help isolate problem channels. The rear panel offers XLR and 1/4" inputs and outputs, both switchable between +4 and -10 dB operations. A USB port has been provided for firmware updates. The AFS2 ships with a standard IEC power cable.
Number of Channels 2
Inputs Connectors: Female XLR and 1/4" TRS Type: Electronically balanced and unbalanced, RF filtered Impedance: Balanced 50 kohm, unbalanced 25 kohm Max Line Level: +20 dBu
Input CMRR >40 dB, typically >55dB @ 1 kHz
Outputs Connectors: Male XLR and 1/4" TRS Type: Electronically balanced and unbalanced, RF filtered Impedance: Balanced >120 ohms, unbalanced >60 ohms Max Level: +20 dBu
A/D/A Converter A/D Converter: DBX type IV conversion system A/D Dynamic Range: >113 dB A-weighted, >110 dB, unweighted, 22 kHz BW Type IV Dynamic Range: >119 dB, A-weighted, 22 kHz BW; >117 dB, unweighted, 22 kHz BW A/D Conversion: 24-bit Sample Rate: 48 kHz D/A Dynamic Range: 112 dB A-weighted, 109 dB unweighted D/A Conversion: 24-bit
Dynamic Range 109 dB A-weighted, 106 dB unweighted, 22 kHz BW
THD + Noise 0.003% typical at +4 dBu, 1 kHz
Frequency Response 20 Hz to 20 kHz, ±0.5dB
Crosstalk Interchannel Crosstalk: >80 dB typical Crosstalk Input to Output: >80 dB
Power US: 100 to 120 VAC 60 Hz EU: 220 to 240 VAC 50 Hz 9 W
Dimensions (HxDxW) 1.8 x 5.8 x 19.0" / 4.4 x 14.6 x 48.3 cm
Weight 4.5 lb / 2.0 kg
More sound to your amps and speakers The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switches for mono 4-way or stereo 2-way/3-way operation Low frequency summed (subwoofer) output x10 range switch on both channels 40Hz high pass (low cut) filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters (the professional standard) Stereo/Mono status LEDs indicate the selected mode dbx® 2 year parts and labor as standard CSA NRTL/C approved CE compliant
Input Connectors XLR
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced >50k ohm, unbalanced >25k ohm
Max Input >+22dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors XLR
Output Type Impedance-balanaced/unbalanced, RF filtered
Output Impedance Balanced 200 ohm, unbalanced 100 ohm
Max Output >+21dBu balanced/unbalanced into 2k ohms or greater
Bandwidth 20Hz to 20kHz, +/-0.5dB
Frequency Response 90 kHz, +0/-3 dB
Signal to Noise Ratio Ref: +4 dBu, 22 kHz measurement bandwidth
Signal-to-Noise (Stereo Mode) >94dB (Low Output), >93dB (Mid Output), >90dB (High Output)
Signal-to-Noise (Mono Mode) >94dB (Low Output, Low/Mid Output); >92dB (High/Mid Output); >88dB (High Output)
Dynamic Range > 106 dB, unweighted, any output
THD+Noise
Interchannel Crosstalk
Crossover Frequencies (Stereo Mode) Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High 450Hz to 9.6kHz (x10 setting)
Crossover Frequencies (Mono Mode) Low/Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low-Mid/High-Mid: 450 Hz to 9.6 kHz; High-Mid/High: 450 Hz to 9.6 kHz
Crossover Filter Type Linkwitz-Riley, 24 dB/octave, state-variable
Low cut Switch Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
Phase Invert Switch Inverts the phase at the output, one switch per output.
x1 / x10 Switch Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
Mode Switch Selects stereo/mono and 2/3/4-way operation
LF Sum Switch Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode.
Indicators Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)
Operating Voltage 100-120 VAC 50/60Hz; 120 VAC 60Hz 230 VAC 50/60Hz
Operating Temperature 32°F to 113°F (0°C to 45°C)
Power Consumption 15W
Power Connector IEC receptacle
Dimensions 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
Unit Weight 4.0 lbs. (1.8 kg)
Shipping Weight 5.8 lbs. (2.6 kg)
 
Weight2.50 kg3.00 kg4.00 kg2.25 kg3 kg2.60 kg
DimensionsN/AN/AN/A52.5 × 25 × 8 cmN/AN/A
Additional information
Weight 2.50 kg
Weight 3.00 kg
Weight 4.00 kg
Weight 2.25 kg
Dimensions 52.5 × 25 × 8 cm
Weight 3 kg
Weight 2.60 kg