ARCAM rBLINK Wireless bluetooth system

248.81 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Streaming high quality music from your favourite mobile device is now easy with the rBlink Bluetooth** audio converter. Engineered by Arcam, and using the aptX®* transmission system, the rBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a HiFi system with stunning quality. Audiophile Bluetooth Music Converter High quality […]

 

Read more

Streaming high quality music from your favourite mobile device is now easy with the rBlink Bluetooth** audio converter. Engineered by Arcam, and using the aptX®* transmission system, the rBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a HiFi system with stunning quality.

  • Audiophile Bluetooth Music Converter
  • High quality music replay from mobile devices
  • Burr Brown PCM5102 24bit DAC
  • Uses aptX™ streaming technology
  • High-end audio circuitry and components
  • High quality cast aluminium casework

The rBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!

The rBlink comes housed in a stylish yet rugged cast aluminium case and is small and discreet enough to sit proudly next to your HiFi system just getting on with the job of delivering great music.

Technical Specifications


  • DAC: TI PCM5102
  • Frequency response: 10Hz — 20kHz, ±0.1dB
  • Total Harmonic Distortion: + Noise 0.002%
  • Signal-to-noise ratio (A –Weighted): 106dB (24-bit)
  • Line output level: 2.15Vrms
  • Supported CODECs: SBC, AAC, aptX®
  • Power requirements: 0.7W max
  • Dimensions (wxdxh, mm): 75 x 100 x 26
  • Weight: 350g
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “ARCAM rBLINK Wireless bluetooth system”

Your email address will not be published. Required fields are marked *

Quick Comparison

ARCAM rBLINK Wireless bluetooth system removeDenon Professional DN-202WR Wireless audio receiver removeYAMAHA MCX-A10 Wireless Digital Music Cast Receiver removeDefinitive Technology W Amp wireless system 150W 4Ω removeCAMBRIDGE AUDIO BT100 Bluetooth Audio Receiver removeB&W Z2 iPod dock and wireless music system remove
NameARCAM rBLINK Wireless bluetooth system removeDenon Professional DN-202WR Wireless audio receiver removeYAMAHA MCX-A10 Wireless Digital Music Cast Receiver removeDefinitive Technology W Amp wireless system 150W 4Ω removeCAMBRIDGE AUDIO BT100 Bluetooth Audio Receiver removeB&W Z2 iPod dock and wireless music system remove
Image
SKUrBLINK134.302MCX-A10Definitive technology W AmpBT100Z2
Rating
Price248.81 incl. GR VAT 119.00 incl. GR VAT 769.21 incl. GR VAT598.99 incl. GR VAT 109.00 incl. GR VAT423.41 incl. GR VAT
Stock

In stock

Available on backorder

In stock

Available on backorder

In stock

Available on backorder

AvailabilityIn stockAvailable on backorderIn stockAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Streaming high quality music from your favourite mobile device is now easy with the rBlink Bluetooth** audio converter. Engineered by Arcam, and using the aptX®* transmission system, the rBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a HiFi system with stunning quality.

  • Audiophile Bluetooth Music Converter
  • High quality music replay from mobile devices
  • Burr Brown PCM5102 24bit DAC
  • Uses aptX™ streaming technology
  • High-end audio circuitry and components
  • High quality cast aluminium casework

The rBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!

The rBlink comes housed in a stylish yet rugged cast aluminium case and is small and discreet enough to sit proudly next to your HiFi system just getting on with the job of delivering great music.

Technical Specifications
  • DAC: TI PCM5102
  • Frequency response: 10Hz — 20kHz, ±0.1dB
  • Total Harmonic Distortion: + Noise 0.002%
  • Signal-to-noise ratio (A –Weighted): 106dB (24-bit)
  • Line output level: 2.15Vrms
  • Supported CODECs: SBC, AAC, aptX®
  • Power requirements: 0.7W max
  • Dimensions (wxdxh, mm): 75 x 100 x 26
  • Weight: 350g
Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer. For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
  • For use with DN-202WT
  • Receives audio up to 30m (100 ft) without wires
  • Use multiple DN-202WR in a system for more coverage
  • XLR and 1/4” audio outputs
  • External, articulating antennas ensure optimum transmission and reception
  • Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more

MusicCAST Desktop Wireless Client with built in IEEE802.11b for wireless communication with music server, Built-in Hi-Fidelity digital amplifier for any type of speaker configuration, On-screen video out for video monitor display, Subwoofer output for powered subwoofer, LAN (Ethernet) network connection and a Large LCD display for ease of use.

    Wireless Digital Audio Terminal
The MusicCAST MCX-A10 clients provide a vast assortment of connections including speaker outputs, left/right audio pre-outs, subwoofer output, and video output so that you can view the on-screen display on a larger monitor.
MusicCAST Concept

    * IEEE802.11b wireless communication with music server
    * Built-in Hi-Fidelity digital amplifier for any type of speaker configuration
    * On-screen video out for video monitor display
    * Line-out audio output to connect to existing audio components
    * Subwoofer output for powered subwoofer
    * Audio input to connect additional source units
    * LAN (Ethernet) network connection
    * Large LCD display for ease of use

Amplification: Class-D Digital Peak: 150 W x 2 @ 4 ohms Wireless Connectivity: 2.4GHz & 5.8GHz Inputs: Optical, AUX, RCA, USB-A for firmware updates and phone charging, Ethernet Outputs: Left and Right Speaker Binding posts, LFE

Turn your mobile, smartphone, tablet or computer into a wireless hi-fi component. By connecting our new BT100 to any supported Cambridge Audio product, you can now stream music wirelessly from your iPhone, smartphone, iPad, tablet, laptop or any device that supports Bluetooth to your hi-fi or entertainment system.


aptX audio enhancement on board

If your smartphone or tablet supports the aptX audio enhancement CODEC the BT100 can support it as well. AptX, which is featured on a growing number of mobile devices as well as MacBooks and Apple desktop computers, allows audio to be broadcast wirelessly in significantly higher quality than over standard Bluetooth. You'll instantly notice more extensive dynamic range, deeper bass and crystal-clear top end.
 

aptX explained

Standard Bluetooth codec (SBC) has variable performance and its weaknesses are very apparent to music lovers including a reduction in high end clarity, muddiness or dullness on stringed content. Conversely, the aptX codec has a fixed performance standard to guarantee a consistently excellent quality when music data is transferred wirelessly over Bluetooth. With almost CD-quality reproduction on offer, you'll instantly experience significantly greater dynamics and infinitely more detail from your favourite music.

 

The best of all worlds - amazing sound, effortless wireless streaming with AirPlay®, a LightningTM connector for docking the latest generation of iPhones® and iPods® and a design that fits almost anywhere. Versatility, convenience and stunning performance; Z2 is the dock that has it all.
Model Z2
Description Wireless Music System
Technical features Apple® AirPlay® technology Lightning connector Digital Signal Processing (DSP) High Quality Class-D amplifier Switch mode power supply FlowportTM Remote control
Drive units 2x 87.5mm (3.5in) full range
Frequency response 50Hz - 20kHz ±3dB on reference axis
Frequency range -6dB at 42Hz and 22kHz
Amplifier power output 2x 20W
Input voltage 100V - 240V ~ 50/60Hz
Rated power consumption 36W
Standby power consumption
Weight0.50 kg0.60 kg9.00 kg4.00 kg0.10 kg2.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.60 kg
Weight 9.00 kg
Weight 4.00 kg
Weight 0.10 kg
Weight 2.60 kg