| Content | The Artex harness AX60 S ( Article 1062) in accordance with EN 361 / EN 358 has length adjustable shoulder , leg straps and is equipped with a back header plate m . Anchorage in the shoulder area , 2 catch loops in the chest area and a wide, padded backrest equipped . The safety harness AX 60 S is available in this variant with fall arrest on tether . The Auffangurt AX 60 S is suitable for collecting , abseiling , holding , climbing and rescue .
SK 12-Y Verbindungsmittel mit Bandfalldämpfer
Der Artex Auffanggurt AX60 S (Artikel 1062) nach EN 361 / EN 358 hat längeneinstellbare Schulter-, Beingurte und ist mit einer Rückenverteilerplatte m. Auffangöse im Schulterbereich, 2 Auffangschlaufen im Brustbereich und einer breiten, gepolsterten Rückenstütze ausgestattet. Den Auffanggurt AX 60 S gibt es in dieser Variante mit Steigschutzöse am Haltegurt. Der Auffangurt AX 60 S eignet sich zum Auffangen, Abseilen, Halten, Steigen und Retten.
Artikeldetails
Rückenverteilerplatte m. Auffangöse im Schulterbereich
Gurtverschluss im Brustbereich
vordere Auffangschlaufen i. Brustbereich
Schulter- und Beingurte längeneinstellbar
Durchsteckverschluss (Schnellverschluss) an den Beingurten u. Haltegurt
Haltegurt / Leibgurt m. seitl. Halteösen
breite, gepolsterte Rückenstütze
Steigschutzöse am Haltegurt
Sitzgurt
Gewicht: 1,6kg
Farbe: orange / blau |
Info
Extension Cable DMX, IP65, 3 meters, with XLR 3 pin, male and female.
|
Remote Control for Z-800 and Z-1000
| T6 Flashlight CREE LED LS-8668
X-BALOG LED Flashlight is equipped with high tech CREE T6. This very strong source of light can just blind the person momentarily. It's life span is approximately up to 100 000 hours.
The body is made of aircraft aluminium alloy, the strongest on the market. It's covered with non slip surface.
TECHNICAL SPECIFICATIONS:
Range : up to 500 meters
Modes : 5 modes - 100% / 70% / 30% /
Stroboscope / SOS (soft touch on button)
Diode type : CREE T6
Body : Aircraft Aluminium Alloy
Weight : 150g
Power supply : 2 x Rechargeable Battery 18650, 3.7v
Dimensions:
Length 200mm
Diameter 24mm
Len diameter 35mm
The set contains:
1 x BL-8668 Flashlight
2 x Rechargeable Battery 18650, 3.7v
1 x Charger
1 x Vehicle Charger Adaptor
1 x Signal / Warning add on |
FULL-BRIDGE PWM MOTOR DRIVER
The L6219 is a bipolar monolithic integrated circuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors.
The L6219 with a few external components form a complete control and drive circuit for LS-TTL or microprocessor controlled stepper motor system. The power stage is a dual full bridge capable of sustaining 46V and including four diodes for current recirculation.
A cross conduction protection is provided to avoid simultaneous cross conduction during switching current direction.
An internal pulse-width-modulation (PWM) controls the output current to 750 mA with peak startup current up to 1 A.
Wide range of current control from 750 mA (each bridge) is permitted by means of two logic inputs and an external voltage reference. A phase input to each bridge determines the load current direction. A thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.
*ABLE TO DRIVE BOTH WINDINGS OF BIPOLAR STEPER MOTOR *OUTPUT CURRENT UP TO 750mA EACH WINDING *WIDE VOLTAGE RANGE 10V TO 46V *HALF-STEP, FULL-STEP AND MICROSTEPPING MODE *BUILT-IN PROTECTION DIODES *INTERNAL PWM CURRENT CONTROL *LOW OUTPUT SATURA TION VOLTAGE *DESIGNED FOR UNSTABILIZED MOTOR SUPPLY VOLTAGE *INTERNAL THERMAL SHUTDOWN
STEPPER MOTOR DRIVER, 6219, DIP24; Motor Type:Stepper; No. of Outputs:4; Output Current:1A; Driver Case Style:DIP; No. of Pins:24; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (20-Jun-2011); Base Number:6219; Device Type:Motor; IC Generic Number:6219; IC Temperature Range:Commercial; Logic Function Number:6219; Operating Temperature Max:70°C; Operating Temperature Min:0°C; Output Current Max:0.75A; Package / Case:DIP; Supply Voltage Max:46V; Supply Voltage Min:10V; Termination Type:Through Hole
Key Features - Able to drive both windings of bipolar stepper motor
- Output current up to 750 mA each winding
- Wide voltage range: 10 V to 46 V
- Half-step, full-step and microstepping mode
- Built-in protection diodes
- Internal PWM current control
- Low output saturation voltage
- Designed for unstabilized motor supply voltage
- Internal thermal shutdown
|
Offering an intuitive plug-and-play digital media solution for the most advanced applications including TV shows, concert touring shows and industrial events, Maxedia Pro offers the Maxedia software in a powerful, road-proven system designed for powerful video and animation playback and real-time manipulation.
Physical
Length: 890 mm (35.0 in.)
Width: 580 mm (22.8 in.)
Height: 530 mm (20.9 in.)
Weight: 74.5 kg (164.2 lbs.)
Dimensions and weight are for complete system including flightcase
Control/User Interface
Real-world paradigm intuitive interface (images, dynamic text labels and actuals preferred to figures)
Maxxyz/Maxedia family user interface
16 x customizable screen workspace/configurations
Touch-screen compatible user interface
Keymapping (cues and transitions assignable to keyboard keys for instant triggering)
Fixture patches identical with Maxxyz series, can be imported from Maxxyz
DMX Viewer for DMX IN value reports
20 x 3D engine layers
Static and dynamic effect presets (e.g. blending, moves)
Range of 2D and 3D plug-ins, various media
Shader and shader media
Video cue recording, no limits
Transitions and wipes
Output parameter adjustments, keystoning and framing
Masking
Backlit LCD display with menu buttons on I/O module for directly configuring DMX addresses and settings
|
Reviews
There are no reviews yet.