ALPS 10KAX2 Logarithmic FADER 88mm T Shaft bar RS60N1219005

Alps RS60N Series Slide Potentiometer, 10kΩ, ±20%, 0.2W, Solder Lug

Brought to you by Alps, these N Type Master Faders have smooth operation with minimal free lever movement, and so are well suited to high precision audio applications. Low profile with a metal "T" bar actuator, the N Type master fader potentiometers are available as single or dual tracks.

• Insulation Resistance 100MΩ at 250Vdc
• Sliding Life 30000 cycles
• Gang Error (Dual track models) -40 → 0dB, 3dB max.

RS60N1219005 / 2499339

• Length 88mm
• Depth 16mm
• Mounting Type Solder Lug
• Brand Alps
• Dimensions 88 x 16 x 8mm
• Maximum Resistance 10kΩ
• Maximum Operating Temperature +70°C
• Minimum Operating Temperature -25°C
• Termination Style Pin
• Series RS60N
• Height 8mm
• Shaft T bar 18mm , height 9mm
• Potentiometer Type Logarithmic
• Number of Turns 1
• Power Rating 0.2W
• Mounting Hole Diameter 1.5mm
• Tolerance ±20%

16-Channel EtherSound Network I/O Card

Mini-YGDAI cards make it easy to add I/O in a wide variety of audio and network formats to Yamaha digital mixing consoles, processors, and power amps that are equipped with compatible card slots. Mini-YGDAI cards can give your system the most up-to-date capabilities for any application.

• 24bit resolution,16-in/16-out EtherSound (ES100) interface (8-in/8-out at 96kHz)
• Expandable to up to 64-in/64-out with MY16-EX expansion cards
• 2x etherCON CAT5 connectors for EtherSound I/O, 1x D-sub 9 pin connector for RS232-C, 2x RJ-45 connectors for MY16-EX connection
• Remote setup, patching and monitoring by AVS Monitor

High-Performance 32-Channel Audinate Dante Expansion Card for X32

• 32-channel 48 kHz, bi-directional audio interface for Dante* IP networks
• High-speed 24-bit signal transmission with sample-accurate synchronization and low latency
• Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS
• Mixed sample and bit rates can coexist on the same network
• Full remote control of X32 possible using the integrated Ethernet switch
• Audinate* Dante Controller application with full control over configuration and signal routing among all Dante-enabled devices

• Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at www.audinate.com)
• Secondary connection can be configured for seamless redundant audio networking
• 3-Year Warranty Program**
• Conceived and designed by BEHRINGER Germany

The EMX5014C and EMX5016CF can be rack-mounted using an optional rack-mounting kit for optimum integration with any system or installation.

4-Channel Acoustic Echo Canceller Card for Yamaha DME64N/24N

The MY4-AEC card provides 4 channels of acoustic echo cancellation for remote conferencing using Yamaha's DME24N and DME64N digital mixing engines. As well as the echo cancellation function, the MY4-AEC card also offers a noise reduction function which removes steady-state background noise such as air conditioning and projector fans etc.
The card also has a feedback suppressor with 42 notch filters per channel to aid the suppression of feedback in PA systems. Any of the 8 internal mic/line inputs of the DME24N can be routed to the MY4-AEC. In the case of the DME64N, any of the MY card slots or CASCADE bus can route to the MY4-AEC. The AES/EBU inputs and outputs (with sample rate conversion) can route to either the MY4-AEC or be used independently in a DME design.

• 24bit resolution, 4-in/4-out adaptive echo canceller
• 4x Euroblock connectors
• HD sound quality
• 4ch feedback suppressor and noise reduction
• Additional 4ch AES/EBU I/O with sampling rate converter
• Easy operation with DME Designer

The PM5D is reliably powered by an external power supply unit. The PW800W is extremely compact and lightweight (3U, 10kg). Thanks to its high efficiency, the low speed cooling fans are extremely quiet.

Two PW800W units can be serially connected using optional PSL120 cable for failsafe operation. PW800W accepts 100 - 240 volts so it can be used anywhere.