ArtSound MDC620 Ceiling Speaker 80W Pair White

198.40 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
MDC620, 2-way coaxial round inwall speaker, 80W,  woofer 6.5” polypropylene carbon,92 dB impedance 8 ohm, frequency range 63 Hz – 20 kHz, dimensions mm (Ø x d) 205 x 75 , weight 1,75 kg / piece, white (2pc)   

 

Read more

MDC620, 2-way coaxial round inwall speaker, 80W,  woofer 6.5” polypropylene carbon,92 dB
impedance 8 ohm, frequency range 63 Hz – 20 kHz, dimensions mm (Ø x d) 205 x 75 , weight 1,75 kg / piece, white (2pc)   

Weight 1.75 kg

Reviews

There are no reviews yet.

Be the first to review “ArtSound MDC620 Ceiling Speaker 80W Pair White”

Your email address will not be published. Required fields are marked *

Quick Comparison

ArtSound MDC620 Ceiling Speaker 80W Pair White removePOLK AUDIO SC6S 20-100 W/ch In-Ceiling speaker removeJBL CONTROL 19CS Ceiling speaker Subwoofer removeJBL CSS 8018 2-WAY CEILING LOUDSPEAKER 20W 100V removeDEFINITIVE TECHNOLOGY UIW RCS II IN-CEILING LOUDSPEAKER 10-250W 8Ω -MATTE WHITE- removeJBL CONTROL 321C 12" Coax Speaker, 250 Watts, 34Hz-18kHz remove
NameArtSound MDC620 Ceiling Speaker 80W Pair White removePOLK AUDIO SC6S 20-100 W/ch In-Ceiling speaker removeJBL CONTROL 19CS Ceiling speaker Subwoofer removeJBL CSS 8018 2-WAY CEILING LOUDSPEAKER 20W 100V removeDEFINITIVE TECHNOLOGY UIW RCS II IN-CEILING LOUDSPEAKER 10-250W 8Ω -MATTE WHITE- removeJBL CONTROL 321C 12" Coax Speaker, 250 Watts, 34Hz-18kHz remove
Image
SKUMDC620SC6SCONTROL 19CSCSS 8018UIW RCS IICONTROL 321C
Rating
Price 198.40 incl. GR VAT178.99 incl. GR VAT 333.00 incl. GR VAT 46.61 incl. GR VAT749.00 incl. GR VAT 571.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

Available on backorder

AvailabilityIn stockIn stockIn stockIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

MDC620, 2-way coaxial round inwall speaker, 80W,  woofer 6.5” polypropylene carbon,92 dB
impedance 8 ohm, frequency range 63 Hz - 20 kHz, dimensions mm (Ø x d) 205 x 75 , weight 1,75 kg / piece, white (2pc)   

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter     2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response     40Hz-20kHz
Lower -3dB Limit     55Hz
Upper -3dB Limit     20kHZ
Nominal Impedance     8 ohms
Recommended Amplifier Power     20 - 100 w/channel
Efficiency     89 dB
Dimensions
Overall Diameter     8-15/16“(22.70cm)
Cut-out Diameter     7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     2-5/8" (6.67cm)
Overall Depth     3-1/8" (7.94cm)
Shipping/Other      
Shipped As     each
Product Weight     2.55 lbs. (1.16kgs) each
Total Shipping Weight     3.00 lbs. (1.36kgs)
Speaker Warranty     Lifetime Warranty

-42 Hz to 200 Hz frequency range (-10 dB)

-140 watts continuous program power capacity

-95 dB sensitivity (1W/1m)

-8 ohms nominal impedance

-Steel back-can with removable locking connector

-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W

-Control 19CST 100V taps: 75W, 30W, 15W.

-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)

-Net Weights: Control 19CS = 5.5 kg (12 lb),

-Control 19CST = 6.4 kg (14 lb)

* Driver Size (dual-cone) 200 mm (8 in) * Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB * Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz o Installed in CSS-BB backcan: 90 Hz - 17 kHz * Coverage (2 kHz) 110° * Driver Continuous Power Handling 20 Watts * 100V Taps 10W, 5W, 2.5W * 70V Taps 10W, 5W, 2.5W, 1.3W * 25V Taps 10W, 5W, 2.5W, 1.3W * Transformer Insertion Loss 1.5 dB Maximum * Transformer Connection Bare wire * Motor Mass 283 g (10 oz) * Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849. * Matching CSS Backcan CSS-BB8 (0.15 cu ft) * Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter * Cutout Diameter o Open-back: 216 mm (8.5 in) o In CSS-BB backcan 295 mm (11.7 in) * Depth (behind grille) 73 mm (2.9 in) * Grille Diameter 327 mm (12.9 in) * Net Weight (ea) 1.58 kg (3.5 lb) * Shipping Weight (ea) 2.25 kg (5.0 lb) * Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan.
Outer Flange Dimensions | Metric :15-1/2” W x 15-1/2” H | 39.4 x 39.4 cm
Cut Out Dimensions | Metric :14-3/8” W x 14-3/8” H | 36.5 x .36.5 cm
Depth from Flange | Metric :5-7/8” | 14.9 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 5-1/4" cast-basket bass/midrange drivers pressure coupled to two 6-1/2” bass radiators
Frequency Response :22 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :
Recommended Associated Amplifier Power :10 – 250 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Weight | Metric :22 lbs | 10 kg
Warranty :5 Years

  • Frequency Range (-10 dB) : 34 Hz – 18 kHz In half space (in ceiling)
  • Frequency Response (±3 dB) : 47 Hz – 16 kHz In half space (in ceiling)
  • Coverage Pattern : 90° conical, broadband (Avg 1k - 16kHz) Average 1 kHz to 10 kHz
  • Directivity Factor (Q) : 8.7 (1k - 16kHz)
  • Directivity Index (DI) : 9.4 dB (1k - 16kHz)
  • Long-Term System : 250 W (1000 W peak), 2 hrs
  • Power Rating, IEC3 : 150 W (600 W peak), 100 hrs
  • Sensitivity (2.83V@ 1m) : 94 dB measured half-space, 99 dB computed for competitive comparison
  • Maximum SPL6 : 118 dB cont ave (124 dB peak)
  • Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
  • Nominal Impedance : 8 ohms
  • Transducer Low Frequency Driver : Kevlar reinforced cone, 50 mm (2 in) voice coil.
  • Transducer High Frequency Driver : JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
  • Input Connector : Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
  • Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in) on 321C
  • Net Weight : 16.0 lbs. (7.3 kg)
  • Shipping Weight : 19.4 lbs. (8.8 kg)
Weight1.75 kg1.36 kg6.40 kg1.58 kg10.00 kg8.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.75 kg
Weight 1.36 kg
Weight 6.40 kg
Weight 1.58 kg
Weight 10.00 kg
Weight 8.80 kg