Content |
• Backlite buttons
• Adjustable record Level with indication
• Combined CD/USB/SD output
• Ir Remote control
The DAP CDR-110 combines a CD-player with an USB/SD MP-3 player/recorder in only 1U. A must have for each effect-rack, but also very suitable to be built into fixed installations. Please note that due to the USB/SD card functionality the record button always has a 3 sec delay as it needs to search the right source. For easy operation the CDR-110 comes including IR remote control. A clear and bright display shows you the status of the unit and track. This MKIII update has backlights buttons which is very convenient in poorly lit environments.
Specifications Power supply: AC 230V - 50 Hz
Power consumption: 50 Watt
Input: USB/SD/MMC, CD, RCA stereo input
THD: 1 kHz, 60 dB
Separation: > 60 dB
Output level: 1 kHz / o dB = 1,2V +/- 2 dB
Mac record input: 800mV
Dimensions: 482 x 250 x 44 mm
Weight: 3,1 kg
Accessories: Remote control
|
- 6CD CHANGER(MP3/WMA)
- Magazine TYPE Reliable Mechanism
- DOT MATRIX design VFD Display
- CD/CD-R/CD-RW/MP-3/WMA File Readable
- XLR (MONO/STEREO) & RCA Analog output
- Coaxial & Optical Digital Ouput
- AMX & CRESTRON Interface(RS-232C)
- IR Remote Control
- Audio Channel : 2 Channels
- Frequency Response : 20Hz~20KHz ±1dB
- Distortion : Less than 0.05%
- Signal-to-Noise Ratio : Better than 90dB
- Analog Output Level(Variable) :
RCA : Nominal 2V(+9dB/-30dB)
XLR : Nominal 4V(+9dB/-30dB) - Head phone Output Level : 1.5V at max (load impedance 32 Ω)
- Quantization : 24bit
- Sampling Frequency : 44.1kHz
- Power Source : 100~120VAC or 220~240VAC; 50/60Hz, 24VDC
(supplied AC mains transformer depends on country requirements) - Power Consumption : 18W (standby : Less than 1W)
- Weight : 6.2kg
- Dimensions (WxHxD) : 482x88x380mm / 19x3.5x14.9in
|
Features: - Interactive ?AQ-Touch? Touch Sensitive Jog Wheels
- Effects ? Echo, Filter, Brake, Flanger, Phase, Pan, Transform
- Real-Time Scratch Effect
- 10 Seconds of Anti-Shock Memory Per Deck
- Instant Start
- Seamless Loop
- Pitch Range Selectable ±4, 8, 16 & 100%
- Auto/Manual BPM (effects Linked)
- Reverse Play
- Master Tempo
- 3 Memory banks for Sampler & Cue
- Internal Intelligent Memory System (IMS)
- Relay Play Allows Consecutive Playback Between Two Decks
- Single/Continuous Play
- Selectable Elapsed, Remain and Total Time Display
- Auto Cue Function
- 6 Effect-Sync Parameter Sets
- Volume Balance Between Music & Sampler
- S/PDIF Digital Audio RCA Coaxial Output
Specifications: Power supply | 230Vac, 50Hz | Output level | 1Vrms (±1dB) | Frequency response | 20Hz - 20kHz (±0.5dB) | De-emphasis | 20Hz - 16kHz (±2.5dB) | THD | 0.01% | Channel separation | 83dB | Signal to noise ratio | 86dB | Pitch bend | 100% | Pitch slider | ±4, 8, 16, 100% | Pitch accuracy | 0.1% | Output:Digital | 0.5V (p-p) @ 75 ohms | Dimensions:Control unit | 482 x 177 x 65.5mm (4U) | Dimensions:Main unit | 482 x 88.8 x 262mm (2U) | Weight | 8.6kg | |
Slot-loading mechanism
RCA unbalanced output
XLR balanced output
Optical and Coaxial S/PDIF digital outputs
XLR AES/EBU output
All, single, random, A/B and 99-track program play
Incremental play
Track elapsed, track remain, disc remain time display
Call function: return to last play start point
Intro check
Fade in/out (0 to 10 sec., in 0.5 sec. steps)
Power on play
Frame-accurate search
Skip back play
Activate or deactivate the wireless remote
Relay play with multiple units through 1/8” relay in/out jack
Index search (CD-DA discs) and directory search (MP3 discs)
Mono output
Resume
Fader start / event start
EOM (End of message)
WAV file (up to 48kHz/16bit) and MP3 file (up to 320kbps VBR) playback
Headphone output
RS-232C and Parallel control
Wireless remote controller included
Footswitch input (for optional RC-3F footswitch)
|
| - REALIZATION OF HIGH QUALITY OF AUDIO WITH DAC CHIP RESPONDING TO 24-BIT/192KHZ In this player a high quality of chip is used in dac to convert digital signal to analog signal. - USE OF ADVANCED MECHANISM ON 3 BEAM METHOD This player absorbs shock and maintains stability level by adopting mechanism for automobile strong for shock. - RESPONSE TO MP3/WMA This player responds to cd-da and mp-3/wma. - CONVENIENT FUNCTION WITH BUILT-IN MICOM This player provides convenient functions such as program play with adoption of micom random play selecting disc and music adopted by micom various repeat plays and music introduction (intro). - PRODUCTS USING THE RECENT ADVANCED TECHNOLOGY This is a player with excellent sound quality and advanced function of digital and is a crystalloid of super-precision processing technology optical technology and digital & analog. - RECENT FASHION OF BEAUTIFUL DESIGN This player adopts vacuum fluorescent display on dot matrix method and implements various character display methods and has design that bonding between aluminum and mold is well harmonize with. - AMX CRESTRON INTERFACE (RS-232) This player also supports control ports for customary control integration for remote control units such as amx and crestron control system. | | | | | Audio Channel | 2 Channels | Frequency Response | 20Hz~20kHz±1dB | T.H.D. (with A filter) | 0.002% (Less than 0.02%) | S/N(with A Filter) | 100dB (Better than 90dB) | Analog Output Level | 6dB±2dB | Headphone Output Level | (load impedance 32Ω) 3.5dB±2dB | Quantization | 24-bit | Analog Output Terminal | RCA-2CH/XLR-2CH/XLR MIX-1CH | Digital Output (TOS LINK/RCA) | SPDIF(IEC958) | Player Responds | CD-DA/MP3/WMA | Operation Temperature | -10°C ~ +40°C | Power Source | 100–120VAC or 220–240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | Power Consumption | 18W(Standby: Less than 1W) | Weight | 5.8kg/12.8lb | Dimensions | 482(W)x88(H)x380(D)mm/19(W)x3.5(H)x14.9(D)in | | | |
|
Integrated
Yes
Transport
No
DAC
No
Multidisc
No
Coaxial digital out
1
Optical digital out
1
XLR out
1
RCA out
1
Headphone
0
Coaxial digital in
0
Optical digital in
0
XLR in
0
RCA in
0
CD Text
No
Memory
Yes
Display off
Yes
Finishes
2
Dimensions (hwd, cm)
14x44x44
PublishTo
B
|
Reviews
There are no reviews yet.