DAP AUDIO D1630 UCI-10 USB XLR Microphone interface XLR-USB 3m

No longer available!

39.04 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
UCI-10 USB XLR Microphone interface • No drivers needed • PC and MAC compatible • Works with all dynamic microphones The UCI-10 is the most easy solution for instant recording with all kinds of dynamic microphones without expensive interfaces, difficult drivers and setup procedures. Connect a dynamic microphone with the XLR plug and connect the […]

 

Read more

UCI-10
USB XLR Microphone interface
• No drivers needed
• PC and MAC compatible
• Works with all dynamic microphones

The UCI-10 is the most easy solution for instant recording with all kinds of dynamic microphones without expensive interfaces, difficult drivers and setup procedures. Connect a dynamic microphone with the XLR plug and connect the USB plug with a PC or MAC and you are ready to record. It works with practically all DAW software programs. It has a sampling rate of 16Bit, 44,1Khz which is the standard sample rate of every CD and gives you the quality to make proffesional recordings.

Specifications
Connectors: USB & XLR female
Drivers: No drivers needed
Operating system: Windows 2000/ XP/ Vista/Windows 7/ MAC
A/D converter: 16 Bit, 44,1 Khz/48Khz
SNR: 85dB
Signal boost gain: 22dB
Impedance: 1.2KOhm
Lenght: 3M
 

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO D1630 UCI-10 USB XLR Microphone interface XLR-USB 3m”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO D1630 UCI-10 USB XLR Microphone interface XLR-USB 3m removeAdam Hall K3MMF1000 - Microphone Cable XLR female to XLR male 10 m removeBESPECO IRO-MB100 BLACK IRON MIC CABLE 1m BLK(XLR-XLR) removeBESPECO IRO-MB900 IRON MIC CABLE 9m BLACK(XLR-XLR) removeBESPECO SLJF-900 JACK MONO/XLR FEMALE 9M CABLE removeCrystal Gold PRCCGMXX3 High Quality Microphone Cable XLR-XLR 3m Hi-End remove
NameDAP AUDIO D1630 UCI-10 USB XLR Microphone interface XLR-USB 3m removeAdam Hall K3MMF1000 - Microphone Cable XLR female to XLR male 10 m removeBESPECO IRO-MB100 BLACK IRON MIC CABLE 1m BLK(XLR-XLR) removeBESPECO IRO-MB900 IRON MIC CABLE 9m BLACK(XLR-XLR) removeBESPECO SLJF-900 JACK MONO/XLR FEMALE 9M CABLE removeCrystal Gold PRCCGMXX3 High Quality Microphone Cable XLR-XLR 3m Hi-End remove
Imagecrystal gold cable xlr hd studio xlr neutrik tasker c196
SKUD1630K3MMF1000IRO-MB100 BLACKIROM-B900 BLACKSLJF900PRCCGMXX3
Rating
Price 39.04 incl. GR VAT 16.42 incl. GR VAT 10.96 incl. GR VAT 12.14 incl. GR VAT 21.37 incl. GR VAT25.00 incl. GR VAT
Stock

Out of stock

Only 2 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockOnly 2 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

UCI-10
USB XLR Microphone interface
• No drivers needed
• PC and MAC compatible
• Works with all dynamic microphones

The UCI-10 is the most easy solution for instant recording with all kinds of dynamic microphones without expensive interfaces, difficult drivers and setup procedures. Connect a dynamic microphone with the XLR plug and connect the USB plug with a PC or MAC and you are ready to record. It works with practically all DAW software programs. It has a sampling rate of 16Bit, 44,1Khz which is the standard sample rate of every CD and gives you the quality to make proffesional recordings.

Specifications
Connectors: USB & XLR female
Drivers: No drivers needed
Operating system: Windows 2000/ XP/ Vista/Windows 7/ MAC
A/D converter: 16 Bit, 44,1 Khz/48Khz
SNR: 85dB
Signal boost gain: 22dB
Impedance: 1.2KOhm
Lenght: 3M
 

Balanced microphone cable with XLR plugs on both ends. Equipped with Adam Hall plugs and high-quality cable material. Despite the small cable diameter, this cable impresses with high stability and optimal coiling characteristics. Product type Pre-assembled Cables
Type Microphone cable
Length 10 m
Colour Black
Cable diameter 6 mm
Center conductor cross section 0.31 mm²
Surge Impedance 64 ohm/km
Capacitance
Bespeco IROMB 100 Black: Assembled shielded microphone cable from Iron Power series that is realized with metal XLR connectors, male and female (XLR3MX-XLR3FX). Cable diameter: 6.3 mm. Cable length: 1 m. Black colour.

BESPECO IRO-MB900 IRON MIC CABLE 9m BLACK(XLR-XLR)

Professional Microphone Cable realized with moulded female cannon connector and moulded mono jack 6,3 mm. Shielded cable 6 mm. Available in black/orange, length 9 mt.
Package 1
Cable Type stereo 6 mm.
Cable Length 9 mt.
Connectors Used cannon F - jack mono
Cables Colors Available black/orange
Packaging Blister
Professional balanced high quality microphone cable 2x0.50mm² with black Neutrik XLR male > XLR female 3pin gold connectors with silver soldering suitable for Studio and Hi-End use, 3 meters. Extremely high quality cable that offers a rich, full and clear sound. In case you are not satisfied by this product's quality we offer you a money back guarantee! Cable type: TASKER C196 Technical characteristics:
  • Cond Number Nominal Section mm²2 x 0,50
  • Formation16 x 0,20
  • External Dimension (mm)7,0
  • External core (mm)2,1
  • Conductor Resistance Ohm/Km ±5%45
  • Operative Temperature (°C)-15°/+70°
  • Capacity (pF/mt) core/core56
  • Capacity (pF/mt) core/shield95
  • Max operative Voltage VAC 49V
95% shielded - tinned copper Conductors: 1 red copper and 1 tinned copper Conductor insulation in compact PE Inner sheath between cores and shield in PVC Outer sheath in PVC colour: transparent Connector type: NEUTRIK NC3FXXB/NC3MXXB 3pole male/female cable connector with black metal housing and gold contacts. Features:
  • Male connector with improved locking recess without "window“, more stringent housing increases durability
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Colored rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Rugged zinc diecast shell, longlasting and dependable
  • Internal thread on shell is well proteced against any damage
  • Unique cage design of female contact for low contact resistance and high integrity
  • Female contact incorporates a solder barrier to prevent solder running into the contact mating area
  • Female connector with improved solid metal latch which is larger and easier to handle
  • Additional ground spring contacts for better shell ground continuity
Weight0.30 kg0.54 kg0.20 kg0.20 kg0.20 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 0.54 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 0.50 kg