DAP AUDIO D3512 PRA-82 Active Speaker Set 2x25W, White

PRA-82
2 x 25W - This set contains 2 pcs, 1 active/1 passive. White

2-way active plastic vented speaker system,
Including mounting/hanging brackets
Woofer: 8“, 8 Ohm, Rubber Edge
Tweeter: 25,2 mm
Textile Dome Tweeter
Amplifier Output Power: 2 x 25 Watt RMS
Freq. Range (-10 dB): 35 – 20.000 Hz
Controls: Gain, Bass, Treble
Dimensions (LxWxH): 265 x 270 x 365 mm
Net Weight: 7,98 kg

The D 8A is the active version of the D 8 offering integrated Class-D power amplifiers, an electronic crossover and loudspeaker equalization.

The D 8A is ideal when combined with active subwoofers for the creation of very compact, active 3-way high-powered systems. For the low- and high frequency ranges, 2x 200 W RMS are available. The maximum overall amplifier output comes to 800 W. The frequency-range is 56 Hz - 20 kHz and the max. SPL is 123 dB / 1m)

The Line input is implemented as an XLR/jack combo socket. In addition an XLR microphone input with a separate level control is available. For operation with powered subwoofers, a switchable low-cut filter is provided.

The extensive range of optional accessories allows virtually unlimited use in fixed installations or flown configurations.

Cabinet Fullrange
Configuration Powered 2-Way
Components 8" / 1“
Rated Power RMS 200 W LF / 200 W HF
Max. Amplifier Output Capability 400 W LF / 400 W HF
max. SPL / 1m 123 dB
Frequency Range (-10 dB) 56 Hz - 20 kHz
Radiation-Pattern H x V 90° x 90°
Dimensions mm (W x H x D) 282 x 442 x 259
Weight 9 kg

Features

- 2-way, full-range system 
– 8″ bass loudspeaker 
– Compression driver
– Asymmetric enclosure design for stage monitor use
– Built-in rigging points 
– Stand mountable 

The Action 8 is a compact 2-way passive full-range loudspeaker that utilizes a 8” low frequency transducer and a full compression driver. The multi-angle cabinet is constructed of Birch plywood protected by an enviormentally friendly ISO-flex black paint finish. A rear located handle and a robust steel grille are provided. A 35 mm tripod socket allows for stand mounting.

Technical Data

Dedicated PA speaker system for fixed installations 2-way bass-reflex system for powerful bass 20 cm woofer (8“) and 2.5 cm dome tweeter (1“) White or titanium plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installation Movable mounting bracket for ceiling or wall installation Ideal for PA applications in restaurants, bars, discos, shops, conferences, etc.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

200W+ 50W RMS - 124dB SPL

• 200mm (8’’) custom woofer with improved efficiency and linearity
• 200Wrms class D amplifier for LF and 50Wrms for HF.
• Low noise toroidal transformer power supply
• On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
• 2 DSP preset for maximum acoustical flexibility
• Available in white colour 8AW

• 2-way bi-amplified, bass-reflex design
• 200mm (8”) LF woofer with 50mm (2”) voice coil, custom made for FBT
• 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
• Frequency response from 65Hz to 20 kHz
• 80°H x 50°V Constant Directivity Rotatable Horn
• optional wall bracket mount thread, 35mm (1 3/8”) top-hat
• one integrated pocket handle