DAP AUDIO D3634 DRX-8A Active Loudspeaker 150W

No longer available!

387.56 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: D3634 Category:
• 175 Watt • Bi-amp • Lightweight, 13 kg only • Reinforced cabinet Specifications System: Bi-Amp. Continuous power: Low 150W / High 25W Total harmonic distortion Low-input: -5dBu 100Hz, out load 40, THDHi-input: -8dBu 15kHz, out load 80, THD 80dBu / Hi > 65dBu Line input Level: -5dBu ±1 dBu Input Impedance: Line 15kΩ input […]

 

Read more

• 175 Watt
• Bi-amp
• Lightweight, 13 kg only
• Reinforced cabinet

Specifications System: Bi-Amp.
Continuous power: Low 150W / High 25W
Total harmonic distortion
Low-input: -5dBu 100Hz, out load 40, THDHi-input: -8dBu 15kHz, out load 80, THD 80dBu / Hi > 65dBu
Line input Level: -5dBu ±1 dBu
Input Impedance: Line 15kΩ input
Indicators: Power & CLIP
Power supply: 110-120V-60Hz / 220-240V – 50/60Hz
External controls: Volume / Master Switch / AC select / Ground lift
SPL@1m: 94dB / 119.5 dB (Max.)
Frequency Response: 68Hz – 20kHz – 6dB
Woofer: 8″ Ø 203mm – 1.5″ Voice Coil
Driver: 1″ / 1″ Voice Coil
Horn Coverage(H*V): 50° x 50°
Construction: 15mm plywood, glued and reinforced,
Paint: Black, scratch resistant
Pole-mount: ABS 35mm pole-mount
Connectors: XLR male & female (link)
Dimensions (H x W x D): 542 x 360 x 352mm
Weight: 13 kg

 

Weight 13.00 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO D3634 DRX-8A Active Loudspeaker 150W”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO D3634 DRX-8A Active Loudspeaker 150W removeVENTIS108A FBT Active Speaker 2-way 800W removeFBT J8A Active speaker 8" 250W removeRCF ART 708-A MK4 Active 2-way speaker removeOMNITRONIC C-80 SPEAKER 2 WAY, 125W, 8'', 8Ω, 90dB removeLD Systems LDSAT82 A G2 W - 8" active Installation Monitor white remove
NameDAP AUDIO D3634 DRX-8A Active Loudspeaker 150W removeVENTIS108A FBT Active Speaker 2-way 800W removeFBT J8A Active speaker 8" 250W removeRCF ART 708-A MK4 Active 2-way speaker removeOMNITRONIC C-80 SPEAKER 2 WAY, 125W, 8'', 8Ω, 90dB removeLD Systems LDSAT82 A G2 W - 8" active Installation Monitor white remove
Image
SKUD3634FBT00038FBT0005313000321C-80LDSAT82AG2W
Rating
Price 387.56 incl. GR VAT 997.00 incl. GR VAT 400.00 incl. GR VAT 430.27 incl. GR VAT 204.00 incl. GR VAT 390.00 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderIn stockIn stockAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

• 175 Watt
• Bi-amp
• Lightweight, 13 kg only
• Reinforced cabinet

Specifications System: Bi-Amp.
Continuous power: Low 150W / High 25W
Total harmonic distortion
Low-input: -5dBu 100Hz, out load 40, THDHi-input: -8dBu 15kHz, out load 80, THD 80dBu / Hi > 65dBu
Line input Level: -5dBu ±1 dBu
Input Impedance: Line 15kΩ input
Indicators: Power & CLIP
Power supply: 110-120V-60Hz / 220-240V - 50/60Hz
External controls: Volume / Master Switch / AC select / Ground lift
SPL@1m: 94dB / 119.5 dB (Max.)
Frequency Response: 68Hz - 20kHz - 6dB
Woofer: 8" Ø 203mm - 1.5" Voice Coil
Driver: 1" / 1" Voice Coil
Horn Coverage(H*V): 50° x 50°
Construction: 15mm plywood, glued and reinforced,
Paint: Black, scratch resistant
Pole-mount: ABS 35mm pole-mount
Connectors: XLR male & female (link)
Dimensions (H x W x D): 542 x 360 x 352mm
Weight: 13 kg

 

  • 2-way bi-amplified, bass-reflex design
  • 200mm (8”) LF woofer with 50mm (2”) voice coil, custom made for FBT
  • 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
  • Frequency response from 65Hz to 20 kHz
  • 80°H x 50°V Constant Directivity Rotatable Horn
  • optional wall bracket mount thread, 35mm (1 3/8”) top-hat
  • one integrated pocket handle
Code: 41212
Configuration: 2 way
Built-in amplifier LF/HF: 700/200 W RMS
Built-in amplifier peak LF/HF: 1400/400 W
Frequency response: 65Hz-20kHz -6dB
Low Frequency woofer: 8 - 2 coil inch
High Frequency driver: 1 - 1.4 coil inch
Maximum SPL cont/peak: 123/131 dB
Dispersion: 80°x50° rotatable HxV
Input impedance: 22 Kohm
AC Power requirements: 640 VA
Input connector: XLR with loop, RCA ST
Power cord: 5/16.4 m/ft
Net Dimension (WxHxD): 274x500x300 / 10.8x19.7x11.8 mm/inch
Net Weight: 15.6/34.39 Kg/lb
Transport Dimension (WxHxD): 395x620x375 / 15.5x24.4x14.7 mm/inch
Transport Weight: 15.3/33.7 Kg/lb

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

Processed Active Monitor

200W+ 50W RMS - 124dB SPL

  • 200mm (8’’) custom woofer with improved efficiency and linearity
  • 200Wrms class D amplifier for LF and 50Wrms for HF.
  • Low noise toroidal transformer power supply
  • On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
  • 2 DSP preset for maximum acoustical flexibility
  • Available in white colour 8AW
Code: 37689 / 37906 White
Configuration: 2 way
Built-in amplifier LF/HF: 200/50 W RMS
Built-in amplifier peak LF/HF: 400/100 W
Frequency response: 60Hz - 20KHz -6dB
Low Frequency woofer: 8 - 1.7 coil inch
High Frequency driver: 1 -1 coil inch
Maximum SPL cont/peak: 120/124 dB
Dispersion: 90° x 60° HxV
Input impedance: 22 Kohm
Crossover Frequency: 2.5 KHz
AC Power requirements: 160 VA
Input connector: XLR - jack with loop
Power cord: 5 / 16.4 m/ft
Net Dimension (WxHxD): 255x415x245 - 10.03x16.33x9.64 mm/inch
Net Weight: 8.2 / 18.7 Kg/lb
Transport Dimension (WxHxD): 330x480x320 - 12.99x18.89x12.59 mm/inch
Transport Weight: 9.7 / 21.38 Kg/lb
ART 708-A is a powerful and versatile solution for a variety of needs, ranging from small-to-medium-scale indoor concerts to outdoor stage monitoring. Compact, powerful, and accurately designed to guarantee accurate monitoring and effortless portability, it features a class-D 800 Watt amplifier with innovative DSP sound processing and 8’’ high-power woofer. APPLICATIONS
  • • Nearfield & portable PA
  • • Foreground/background PA, distributed PA, frontfill and sidefill
  • • Houses of worship, video monitoring, retail, clubs, performance theatre, theme parks
  • • Compact voice reinforcement systems
  • • Stage monitoring
General Specs o 127 dB Max SPL o 800 WATT 2-way peak power o 90 x 70, Wide dispersion constant directivity horn o Innovative DSP Processing o 1" Compression Driver, 1.0" v.c. o 8" Woofer o FiRPHASE Technology Acoustical Specs • Frequency Response -3 dB: 60 Hz ÷ 20 Hz • Max SPL: 127 dB • Horizontal coverage angle: 90° • Vertical coverage angle: 70° • Compression Driver: 1“, 1.0" v.c. • Woofer: 8“, 2" v.c. Inputs/Outputs • Input signal: bal / unbal • Input connectors: XLR male, Jack • Output connectors: XLR female • Input sensitivity: -2 dBu / +4 dBu Processor Section • Crossover frequencies: 1600 Hz • Protections: RMS • Limiter: Soft limiter • Controls: Volume, Boost, Mic/Line Amplifier Specifications Total power: 800 W PEAK •  High frequencies: 200 W PEAK •  Low frequencies: 600 W PEAK Total power: 400 W RMS •  High frequencies: 100 W RMS •  Low frequencies: 300 W RMS • Cooling: Convection • Connections: VDE AC socket Cabinet Specs • Cabinet Material: Composite PP • Hardware: 2xM10 flying p. • Handles: 1 top • Pole Mount/Cap: Yes • Colour: Black Size/Weight • Height: 480/18.88 mm/inch • Width: 291/11.44 mm/inch • Depth: 276/10.86 mm/inch • Net Weight: 10.2/22.48 kg/lbs

Dedicated PA speaker system for fixed installations 2-way bass-reflex system for powerful bass 20 cm woofer (8“) and 2.5 cm dome tweeter (1“) White or titanium plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installation Movable mounting bracket for ceiling or wall installation Ideal for PA applications in restaurants, bars, discos, shops, conferences, etc.

The LD Systems SAT82AG² is an active installation monitor, which provides a convincing performance on a PC or laptop and as a home studio monitor. The compact 2-way bass reflex design is equipped with an 8" custom-made woofer and a 1" compression driver which are driven by an 80 Watt Class AB power amplifier. The input is a combo socket; an XLR socket is used to loop through the signal. With a frequency response of 50 Hz - 20 kHz and 114 dB maximum sound pressure, the SAT82AG² produces a balanced sound with high dynamics. The monitor features protection circuits for the tweeter against overcurrent, and a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes. The cabinet of the SAT82G² is made of 12mm MDF with M6 flight points and is available in black or white with a durable textured paint finish. A versatile mounting bracket is included; a universal joint mount is available as an accessory.
  • Product Type: installation monitor
  • Type: active
  • Woofer Size: 8“
  • Woofer Size: 203.2 mm
  • Woofer Magnet: ferrite
  • Woofer Brand: custom-made
  • HF Driver Size: 1“
  • HF Driver Size: 25 mm
  • HF Driver Magnet: ferrite
  • HF Driver Brand: custom-made
  • Amplifier (A): Class A/B
  • Dispersion Angle (H x V): 60° x 60°
  • Power Output (RMS): 80 W
  • Frequency Response: 50 Hz - 20,000 Hz
  • Max SPL: 114 dB
  • Protection: overcurrent, HF drivers
  • Controls: volume, power switch (on/off), power mode (on/auto)
  • Indicators: Power, Overload
  • Line Input Connectors: 6.3 mm TRS, XLR
  • Line Output Connectors: XLR
  • Power Supply: transformer
  • Operating Voltage: 220 V AC - 240 V AC, 50 - 60 Hz
  • Cabinet Material: 12 mm MDF
  • Cabinet Surface: textured coating
  • Cabinet Colour: white
  • Cabinet Type: bass reflex
  • Width: 274 mm
  • Height: 410 mm
  • Depth: 243 mm
  • Features: wall bracket
Weight13.00 kg16.00 kg9.00 kg10.00 kg7.00 kg8.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 13.00 kg
Weight 16.00 kg
Weight 9.00 kg
Weight 10.00 kg
Weight 7.00 kg
Weight 8.00 kg