M-AUDIO BX-5 D2 bi-amplified studio Monitor 70W RMS (Pair)

Discontinued

221.78 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
frequency response    53 Hz – 22 kHz crossover frequency    3 kHz low-frequency amplifier power    40 watts high-frequency amplifier power    30 watts maximum signal-to-noise (dynamic range)    > 100 dB (typical A-weighted) polarity    positive signal at + input produce outward LF cone displacement input impedance    20 k ohms balanced, 10 k ohms unbalanced input sensitivity    85 mV […]

 

Read more

frequency response    53 Hz – 22 kHz
crossover frequency    3 kHz
low-frequency amplifier power    40 watts
high-frequency amplifier power    30 watts
maximum signal-to-noise (dynamic range)    > 100 dB (typical A-weighted)
polarity    positive signal at + input produce outward LF cone displacement
input impedance    20 k ohms balanced, 10 k ohms unbalanced
input sensitivity    85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
power    factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
protection    RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
cabinet    vinyl-laminated MDF
size    7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm
weight    11 lbs./unit; 5 kg.

Weight 6.00 kg

Reviews

There are no reviews yet.

Be the first to review “M-AUDIO BX-5 D2 bi-amplified studio Monitor 70W RMS (Pair)”

Your email address will not be published. Required fields are marked *

Quick Comparison

M-AUDIO BX-5 D2 bi-amplified studio Monitor 70W RMS (Pair) removeRCF MYTHO 6 ACTIVE TWO-WAY 6.5" DSP MONITORING SYSTEM removeADAM S2X Active Studio Monitor 250W removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeADAM A8X Active Studio Monitor 150W removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded remove
NameM-AUDIO BX-5 D2 bi-amplified studio Monitor 70W RMS (Pair) removeRCF MYTHO 6 ACTIVE TWO-WAY 6.5" DSP MONITORING SYSTEM removeADAM S2X Active Studio Monitor 250W removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeADAM A8X Active Studio Monitor 150W removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded remove
Image
SKUBX5 d2MYTHO6S2XE005760A8XTwin6 Be
Rating
Price 221.78 incl. GR VAT 861.79 incl. GR VAT 1,394.99 incl. GR VAT 221.00 incl. GR VAT 1,045.00 incl. GR VAT1,675.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

frequency response    53 Hz – 22 kHz
crossover frequency    3 kHz
low-frequency amplifier power    40 watts
high-frequency amplifier power    30 watts
maximum signal-to-noise (dynamic range)    > 100 dB (typical A-weighted)
polarity    positive signal at + input produce outward LF cone displacement
input impedance    20 k ohms balanced, 10 k ohms unbalanced
input sensitivity    85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
power    factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
protection    RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
cabinet    vinyl-laminated MDF
size    7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm
weight    11 lbs./unit; 5 kg.

MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.

Acoustical Specifications
Frequency Response -3 dB:40 Hz÷ 20 kHz
Max SPL:114 dB 
Horizontal coverage angle:110° 
Vertical coverage angle:70° 
Compression Driver:1" neo, metal dome 
Woofer:6.5" neo, ICC technology 
INPUT/OUTPUT SECTION
Input connectors:combo XLR/Jack 
Input sensitivity:-6/+6 dBu 
PROCESSOR SECTION
Crossover frequencies:1900 Hz 
Protections:thermal, excurs., rms 
Limiter:soft limiter 
Controls:bass tilt, roll-off, treeble tilt, desktop, DSP controlled 
AMPLIFIER SPECIFICATIONS
High frequencies:100 Watts 
Low frequencies:200 Watts 
Cooling:convection 
Connections:vde 
CABINET
Cabinet Material:die cast aluminum 
Hardware:orientation adjustable stand 
PHYSICAL SPECIFICATIONS
Height:370/14.5 mm/inch 
Width:265/10.4 mm/inch 
Depth:250/9.8 mm/inch 
Net Weight:10.5/23 Kg/Lbs

 

PRICE PER UNIT

 

S2X

The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.

The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.

 

Review at a glance: "Sonic sensation“

“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)

“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)

Woofer
Number1
Basket Ø7.5" (186 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain±2 dB (0.5 dB steps)
Input connectors
AnalogXLR
Digital (optional)AES/EBU / SPDIF / word clock
General data
PanelFront
Frequency response35 Hz - 50 kHz
THD > 80 Hz≤0.8 %
Long term output≥110 dB
Max. peak≥120 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight23.8 lb (10,8 kg)
Magnetically shieldedOptional
Height x Width x Depth14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

 

 

Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 115dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 2x150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Visualization and control :

Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Woofer : 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker
Tweeter : TB871, Focal inverted dome tweeter in Beryllium
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight : 30.8lb (14kg)

 

Weight6.00 kg12.00 kg11.00 kg7.50 kg13.00 kg14.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.00 kg
Weight 12.00 kg
Weight 11.00 kg
Weight 7.50 kg
Weight 13.00 kg
Weight 14.00 kg