M-AUDIO BX-5 D2 bi-amplified studio Monitor 70W RMS (Pair)

Discontinued

221.78 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
frequency response    53 Hz – 22 kHz crossover frequency    3 kHz low-frequency amplifier power    40 watts high-frequency amplifier power    30 watts maximum signal-to-noise (dynamic range)    > 100 dB (typical A-weighted) polarity    positive signal at + input produce outward LF cone displacement input impedance    20 k ohms balanced, 10 k ohms unbalanced input sensitivity    85 mV […]

 

Read more

frequency response    53 Hz – 22 kHz
crossover frequency    3 kHz
low-frequency amplifier power    40 watts
high-frequency amplifier power    30 watts
maximum signal-to-noise (dynamic range)    > 100 dB (typical A-weighted)
polarity    positive signal at + input produce outward LF cone displacement
input impedance    20 k ohms balanced, 10 k ohms unbalanced
input sensitivity    85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
power    factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
protection    RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
cabinet    vinyl-laminated MDF
size    7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm
weight    11 lbs./unit; 5 kg.

Weight 6.00 kg

Reviews

There are no reviews yet.

Be the first to review “M-AUDIO BX-5 D2 bi-amplified studio Monitor 70W RMS (Pair)”

Your email address will not be published. Required fields are marked *

Quick Comparison

M-AUDIO BX-5 D2 bi-amplified studio Monitor 70W RMS (Pair) removeADAM A5X Active Studio Monitor 50W removeMACKIE HR624mk2 Monitor - Active Reference Monitor removeADAM A77X Active Studio Monitor 100W removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR remove
NameM-AUDIO BX-5 D2 bi-amplified studio Monitor 70W RMS (Pair) removeADAM A5X Active Studio Monitor 50W removeMACKIE HR624mk2 Monitor - Active Reference Monitor removeADAM A77X Active Studio Monitor 100W removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR remove
Image
SKUBX5 d2A5X149.018A77XCMS 50040050
Rating
Price 221.78 incl. GR VAT 530.00 incl. GR VAT 499.00 incl. GR VAT 1,175.00 incl. GR VAT 565.00 incl. GR VAT 155.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

In stock

In stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

frequency response    53 Hz – 22 kHz
crossover frequency    3 kHz
low-frequency amplifier power    40 watts
high-frequency amplifier power    30 watts
maximum signal-to-noise (dynamic range)    > 100 dB (typical A-weighted)
polarity    positive signal at + input produce outward LF cone displacement
input impedance    20 k ohms balanced, 10 k ohms unbalanced
input sensitivity    85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
power    factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
protection    RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
cabinet    vinyl-laminated MDF
size    7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm
weight    11 lbs./unit; 5 kg.

PRICE PER UNIT

The original A5

The small A5 managed to make itself a big name in both professional environments as well as in computer or desktop applications. A wealth of truly outstanding reviews and many awards helped to establish this speaker as one "of the best small monitors” and a "great choice for the small studio.” (Future Music, 01/2009).

The new A5X

The similar dimensions and name could make one believe that the A5X is nothing more than a new version of the A5. A quick listening however leaves no doubt that the A5X is much more than that.

Like all other models of the AX-Series it features the proprietary X-ART tweeter. The very data of this technology shows that it is at the forefront of what tweeters can accomplish. Numerous listening tests have confirmed this.

A 5.5” Midwoofer reproduces the frequencies below 2.5kHz. The diaphragm is made from Carbon fiber/Rohacell/Glass fiber, which is the same composite structure shared in the next two bigger models. This material with minimum weight and maximum rigidity prevents break up resonances, resulting in an outstanding dynamic behaviour and impeccable sound characteristics.

Stereolink

A very handy and exclusive feature found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.

This new technology connects two A5X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.

Controls and Connectors

The front of the A5X sports dual ports for surprisingly low frequency response down to 50Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.

Review: "The A5X: a superb impression.“

"A sparkling and lively desktop monitor with an open, powerful character. Good filters and practical ergonomics as well as useful equipment make ADAMs A5X an ideal partner in multimedia nearfield sound." (Stereo, 10/10)

Mid-Woofer
Number1
Basket Ø5.5" (145 mm)
Voice coil Ø1.5" (32 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music50 W / 75 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response50 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.6 %
Long term output≥102 dB
Max. peak≥110 dB
Crossover frequencies2500 Hz
Input impedance30 KOhm
Weight14.6 lb (6,6 kg)
Magnetically shieldedNo
Height x Width x Depth11" (280 mm) x 6.5" (170 mm) x 8.5" (220 mm)
Warranty5 Years
Delivery contents

Cinch-cable, Power cord, Manual

 


 

Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB

Benefit: Sound true to actual recording

Benefit: Any pair of speakers is a matched pair

Active Technology

2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W

Benefit: Precise dividing slope, correct phase, and low distortion

Benefit: Minimal chance of speaker damage due to overdriving

Servo Loop Woofer Technology

Electronic control and dampening

Benefit: Speaker output is as true to incoming signal as possible

Frequency Response Controls

80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)

Benefit: Excellent response in a variety of acoustic environments

Wide Sweet Spot

Custom-designed die-cast wave guide

Benefit: User hears the same thing across a wider range of motion

3-Position Acoustic Space Switch

Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement

Benefit: As close-to-flat performance as possible regardless of placement in room

Applications
Professional Recording Studios

Home and Project Studios

Film (THX) and Post Production Studios

Home Theater Installations

 

Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

Subwoofer
Number1 / 1
Basket Ø7" (175 mm) / 7" (175 mm)
Voice coil Ø1.5" (38 mm) / 1.5" (38 mm)
Cone materialCarbon / rohacell / glass / Carbon / rohacell / glass
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
LocationRear
General data
PanelFront
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥114 dB
Max. peak≥122 dB
Crossover frequencies400 / 3000 Hz
Input impedance30 KOhm
Weight28.2 lb (12,8 kg)
Magnetically shieldedOptional
Height x Width x Depth9.5" (235 mm) x 21" (530 mm) x 11" (280 mm)
Warranty5 Years

 

The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.

 

Specifications
Frequency response (+/-3dB) : 55Hz - 28kHz
Maximum SPL : 107dB SPL (peak @ 1m)

Input :

Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA

HF amplifier stage : 50W RMS, class AB
LF amplifier stage : 80W RMS, class AB

Electric supply :

Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord

Adjustment :

- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch

Indicators :

Power ON / OFF LED
Standby / ON LED
Audio Clip LED

Woofer : 5" Focal drive unit, Polyglass cone
Tweeter : Aluminum/Magnesium inverted dome Focal tweeter
Shielding : Integral by cancellation magnet
Construction : Reinforced and damped Aluminum cabinet

Finish :

Black powder cabinet

Dimensions with spikes : 289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“)
Dimensions with table stand : 299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“)
Net weight : 7.7kg - (17lb)

 


Features

    Professional 2-way active DJ monitors
    Output: 2x 30 W RMS
    Frequency response: 35 Hz - 20 kHz
    S/N Ratio: > 75 dB
    Impedance: 8 ohm
    Magnetically shielded bass drivers
    Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter



    Technical Data

    Dimensions: 232 x 320 x 180 mm
    Weight: 5.0 kg (per piece)

Weight6.00 kg7.00 kg12.25 kg13.00 kg7.70 kg3.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.00 kg
Weight 7.00 kg
Weight 12.25 kg
Weight 13.00 kg
Weight 7.70 kg
Weight 3.50 kg