Content |
The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.
FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling
SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz) 106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)
|
The alphaton Direct Injection-Box SM-50 allows direct connection of electric guitars,
electric bass, and electronic music instruments with mixing desks of PA systems
and of recording studios.
The SM-50 reduces the amount of microphones used on stage, thus improving gain
before feedback.
Coloration of sound is avoided. Clean signal without interference from other instruments
eases the job of the recording engineer. The use of a strong aluminium die-cast box allows
trouble-free function for a number of years even under adverse conditions. Double grounding
(hum) can be eliminated by activating the built-in ground-lift switch. Isolation voltage between
input and output is 2500 volts, against ground 1500 volts (with ground-lift switch activated).
The box thus complies with toughest safety standards.
Technical Data
input impedance 20 kOhm
input impedance, instrument
input impedance, line-In
input impedance, speaker
output impedance 200 Ohm
frequency response 30 ... 20000 Hz, ± 1 dB
THD
isolation voltage tranformer pri/sec 2500 V
outpur to ground 1500 V
inputs 1/4" phone jacks, unbalanced
outputs XLR, balanced, microphone level.
pin 1 = ground, pin 2 = hot, pin 3 = cold
case aluminium die-cast
weight 230 g
dimensions113 x 71 x 37 mm
| 2-channel passive DI box for line and loudspeaker levels. PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.
Specifications
- No. of channels: 2
- Passive/Actibe: Passive
- Transformer balanced: Yes
- Attenuator: -30 dB
- Input/Output Gain: -20 dB
- Ground lift switch: Yes
- Max Input Level: +54 dBu
- Max Output Level: +4 dBu
- Frequency Range 2K Source Imp. -1dB: 10 Hz - 40 kHz
- Input Impedance 60Hz: 60 kΩ
- Nom. Output Impedance: 600 Ω
- Housing: Steel
- Dimension: 110 x 110 x 45 mm
|
The TX1181 is the perfect companion sub to the TX1122 and TX1152 for compact and portable performance. Using the proven EVS18S woofer, the TX1181 effortlessly provides the low-frequency energy needed to keep up with Tour X boxes, as well as many other EV loudspeaker products. The integrated, low-pass input filter allows for single amp drive, and the high-sensitivity and excellent power handling don\'t require a large, expensive amplifier to generate high SPL. The TX1181\'s unique Backbone grille not only looks great, but also provides greater strength and damage resistance than simple grille block designs. Proprietary, ergonomically correct handles and angled input panels, and integrated, screw-in-style pole-mount make the TX1181 easy to transport and employ in a variety of applications.
Specifications
Frequency Response (-3dB) |
50 - 160 Hz |
Frequency Response (-10dB) |
45 - 700 Hz |
Recommended High-Pass Frequency |
30 Hz |
Sensitivity 1W/1m |
100 dB |
Max. SPL / 1m (calc) |
132 dB |
System Power Handling (continuous/program/peak) |
500/1000/2000 Watts |
LF Transducer |
EVS18S |
Nominal Impedance (Passive) |
8 Ohms |
Minimum Impedance |
7.5 Ohms |
Enclosure Material |
Plywood and MDF with EVCOAT |
Color |
Black |
Flying |
No |
Input Connections |
Parallel Neutrik® NL4 |
Internal Crossover |
Yes |
Speaker Type |
Subs |
Weight Net |
33.8 kg ( 74.52 lbs ) |
Dimensions (HxWxD) |
769 x 439 x 591 mm (30.28" x 17.28" x 23.27“) |
| Powerful, dynamic 2 x 8" Bandpass Subwoofer. Its compact dimensions permit unobtrusive placement of the subbass anywhere, either vertically or horizontally. A 2-channel power amplifier is all that is required to operate e.g. a subbass with up to 4 satellites. Sturdy MDF housing with textured finish.
Specifications 2 x 8" Bandpass Subwoofer:
- Model Name: LDSUB88
- Type: Bandpass
- Components:
- Woofer: 2 x 8" Custom Made
- Power Capacity (Cont./Peak): 2 x 100 W / 2 x 180 W
- Frequency Range: 40 Hz - 120 Hz
- SPL 1 W / 1 m: 92 dB
- Max SPL: 115 dB
- Impedance: 2 x 8 ohms
- Connectors:
- Input: Clamp-type
- Output: Clamp-type
- Cabinet Material: 15 mm MDF
- Cabinet Surface: Painting
- Dimensions: 450 x 500 x 520 mm
| Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs |
Reviews
There are no reviews yet.