Content | Features
- 10” long-excursion low-frequency driver with oversized magnet
- 240-watt Class A/B amplifier with all-discrete transistor design
- Stereo inputs: XLR; 1/4" balanced/unbalanced; RCA
- Stereo satellite outputs: XLR; 1/4" balanced/unbalanced
- Internal crossover offers variable frequency
- Included subwoofer bypass footswitch
- High-density bass reflex cabinet with internal bracing
- Removable grill and detachable feet
- 180 phase reverse switch
Specifications
- Type: Bass-reflex active powered subwoofer
- Woofer Driver: 10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber surround
- Frequency Response: 20-200Hz (-3dB)
- Crossover: HP/LP linked filter sweepable from 50-200Hz; 24dB/octave 4th-order alignment
- Input Sensitivity: 80mV pink noise input produces 100dBA output SPL at one meter with vol
- Adjustable Gain: (-30dB to +6dB)
- Amplifier: 240 watts average power into 4, discrete transistor design
- Signal-To-Noise Ratio: 96dB (A-weighted)
- THD at Rated Power, Mono Mode: 0.019%
- Inputs: Two XLR balanced/unbalanced inputs; two TRS balanced/unbalanced inputs; two unbalanced RCA
- Outputs: Two XLR balanced/unbalanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites
- Controls: Volume/gain control, phase inverse switch, variable crossover control, subwoofer bypass footswitch jack
- Input Impedance: 20k ohms balanced, 10k ohms unbalanced
- Maximum Input Level: +20dBU
- Protection: Over temperature, turn-on/off transient, subsonic filter, external mains fuse, DC protection, over current protection
- Indicator: Power on (blue) or standby/bypass (red)
- Power Requirements: Dual-voltage (selectable by rear-panel switch) for either 100-120V/~50/60Hz or 220-240V/~50/60Hz; powered via detachable grounded IEC cable
- Cabinet: Vinyl-laminated high-density internally braced 3/4” MDF cabinet with 1” front and back baffles
- Dimensions: 15.5 in. (h) x 13 in. (w) x 17.25 in. (d); 39.4 cm (h) x 33 cm (w) x 43.8 cm (d)
- Shipping Weight: 54.6 lbs.; 24.75 kg
|
Genelec 7060B Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.
The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.
The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.
| 108 dB | | Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 10" Active | | 120 W | | H x W x D 527 x 462 x 363 mm | | 26 Kg (57 lb) | | 6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out |
|
Genelec 7270A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7270A adapts to all low frequency monitoring situations.The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.
The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio.
The main channels crossover frequency can be adjusted between 50-100 Hz. The LFE channel input (input 4) features an adjustable 50 - 120 Hz low-pass filter and a 0/+10 dB sensitivity switch.
The Genelec Loudspeaker Manager (GLMTM) control network and software enhances further the performance of the 7270A: it features adjustment of levels, distance delays, phase and flexible room response improvement equalization with the reliable and robust AutoCalTM automated calibration system via the GLMTM control network.
The Genelec Laminar Spiral EnclosureTM (LSETM) bass reflex enclosure is made of sheet metal rolled into a spiral shape and clamped between sturdy MDF side panels.
This novel construction technique allows for a long reflex tube to be mounted into a small cabinet, which provides as a result excellent laminar flow characteristics with minimal turbulence noise.
| 112 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 12“ | | 250 W | | H x W x D 625 x 555 x 490 mm | | 51 Kg (112 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
|
The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4" TRS and RCA main inputs, and 1/4" TRS and RCA pass-through outputs to connect your top speakers.
The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.
8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement Technical SpecificationsInputs | 2x Balanced 1/4" TRS
2x Unbalanced RCA | Outputs | 2x Balanced ¼" TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option) | Frequency Response | 30 Hz - 200 Hz | Low Pass Filter | 50 - 130 Hz (variable) | Signal to Noise Ratio | >98 dB (A weighted) | THD | 0.05% | Amplifier Power | 200 W peak, 100 W RMS | Power Consumption | 120 W | Amplifier Type | Class AB | Max Peak SPL | 104 dB at 1 m | Woofer | 8" glass-composite, downward-firing | Port | Rear-firing bass reflex (round) | Input Gain Adjustment | -30 to +6 dB | Polarity Reverse | 0 or 180° | Low Pass Filter | 50 Hz to 130 Hz | High Pass Filter | On/off | Protection | RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
| Power | 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz | Cabinet | Vinyl-laminated MDF | Dimensions | 10.2 x 12.6 x 11.0" (260 x 320 280 mm) | Weight |
21.2 lb (9.6 kg)
|
|
The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.
Specifications Frequency response : | 30Hz - 250Hz | Maximum SPL : | 116dB SPL (peak @ 1m) |
Input :
|
Right, left, LFE
Electronically balanced, 10 kOhms
XLR 3 points socket
Adjustable
| Outputs (towards speakers) : | Type/Impedance: Electronically balanced / 50 Ohms - Connector: XLR 3 points plug |
Amplification :
|
350W rms, BASH® technology
|
Signal internal treatment :
|
Subwoofer section: Mono right/left summation
LFE + mono low-pass
24dB/octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selection
Speaker section : 24 dB / octave
|
Electric supply :
|
Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire
|
Visualization and control :
|
Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 "Bypass" (external remote contol)
High-pass frequency selection
Releasable high-pass
| warning light : | Power on LED, Subwoofer switch (mute), Released high-pass |
Electric supply :
|
Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire
| Subwoofer : | 11W7670, 10-5/8" (27cm) Focal "W" composite sandwich cone driver | Box : | 7-1/2" (19mm) MDF panels |
Finish :
|
Dark red natural veneering side panels, black body.
| Dimensions (HxWxD) : | 14-15/16 x 13-9/16 x 17-5/16 " (380 x 344 x 440mm) | Weight : | 50.7lb (23kg) |
|
Genelec 7271A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7271A adapts to all low frequency monitoring situations.The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.
The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio. The main channels crossover frequency can be adjusted between 50 - 100 Hz.
| 118 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 2 x 12“ | | 500 W | | H x W x D 755 x 803 x 490 mm | | 82 Kg (180 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
|
Reviews
There are no reviews yet.