Content |
The long throw antenna system is made up of three components; The ATCS-A60MX mixer the ATCS-A60RX receiver antenna and the ATCS-A60TX transmitting antenna.
ATCS-A60MX IR transmitter/receiver mixer
• The master antenna mixer can power up 4 transmitter antennas and 4 receiving antennas.
• Infrared transmission keeps the signal in the room. Therefore multiple conference systems can be used in
adjacent rooms and the conference stays secure.
• The ATCS-A60MX includes rack mount adaptors
ATCS-A60RX IR Receiving Antenna (green indicator)
• The high-power receiving antenna can work up to 15 meters for large conference rooms or high ceiling
meeting rooms.
• The A60RX can be stand mounted and wall mounted
ATCS-A60TX IR receiver antenna (red indicator)
• The high-power transmitting antenna can work up to 20 meters for large conference rooms or high ceiling
meeting rooms.
• The A60RX can be stand mounted and wall mounted
- IR transmitting unit terminal: BNC×4(75 ohms)
- IR receiving unit terminal: BNC×4(75 ohms)
- I/O terminal: BNC×1(75 ohms)
- Operating temperature range: 0 to +40C°
- Power consumption: 50W
- Power supply: 100 to 240VAC, 50/60 Hz
- Dimensions: 44 (H) x 420 (W) x 225 (D) mm
- Weight Approx.: 3.0 kg
- Accessories: AC cord, Rack-mount adapter x 2, Screw to attach the rack-mount adapter x
ATCS-A60TX ATCS-A60RX - Communication method: IR wireless system
- Operating frequency band: 8 to 10 MHz 1 to 5 MHz
- IR wavelength: 870 nm
- Modulation method: Frequency modulation
- Operating distance*: 20 m (TX) 15 m (RX)
- Operating temperature range: 0 to 40C°
- Connecting terminal: BNC jack
- Power supply: 24V dc supplied from the ATCS-A60MX
- Dimensions: 44 (H) x 149 (W) x 97 (D) mm
- Weight: 351 g (TX) 386 g (RX)
|
- Supports video resolutions up to Full HD 1080p/60Hz.
- Plug the HDMI receiver into the HDMI input on your display or projector and power via a USB port.
- Plug the HDMI transmitter into the HDMI output or USB-C port on your laptop, MacBook or Chromebook without the use of an additional power cable.
- Turn your PC or laptop into a media center and share content wirelessly on a display mounted on a floor stand or wall mount.
- Connect up to 20 HDMI transmitters to a single HDMI receiver and easily switch between presenters with a press of a button.
- Use your smart phone or tablet (Android or Apple) to stream content wirelessly to the receiver via the built-in AirPlay or Miracast function (screen mirroring).
Video/audio
|
|
Video resolution |
1080p@60Hz |
PC resolution |
Max. 1920 x 1080 |
HDMI standard |
HDMI 1.4 / HDCP 1.3 |
Audio formats |
PCM stereo |
Technology
|
|
Operational frequency |
5 GHz |
Operating range |
Up to 20 metres LOS (line of sight) |
Latency (delay) |
<120 ms |
Video compression |
H.264 |
Transmitter
|
|
AV input |
1 x HDMI |
USB input |
1 x micro-USB (PC, laptop) |
Dimensions (h x w x d) |
83 x 32 x 13 mm |
Weight |
27 grams |
General
|
|
Ambient temperature |
0 ~ 40 °C |
Ambient humidity |
20% ~ 90% |
Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
| Battery disposal information [77,1 KB]
LD Systems MEI1000G2
The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Model name: LDMEI1000G2BPR
- Product type: Belt pack receiver
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- Frequency response: 60 Hz - 16 kHz
- S/N ratio: 80 dB
- THD:
- Audio outputs: 3.5 mm jack
- Max. audio output level: 100 mW
- Controls: Up, Down, Escape, Set, Volume
- Indicators: LC Display, Low Battery, Power
- Power supply: 2 x 1.5 V AA
- Operating time: > 13 hrs., battery-dependent
- Width: 65 mm
- Height: 90 mm
- Depth: 24 mm
|
Battery disposal information [77,1 KB]
User's manual [7,82 MB]
LD Systems MEI1000G2
The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Product type: Transmitter
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- RF output: 10 mW
- Frequency response: 60 Hz - 16 kHz
- S/N ratio: 85 dB
- Inputs: 2
- Input connections: XLR/ 6.3 mm jack (combo)
- Input impedance: 14 kOhm
- Antenna connector: TNC
- Controls: up, down, set, power, volume headphone, input level, pad
- Indicators: LC display
- Power supply: 12 - 18 V DC
- Width: 200 mm
- Height: 44 mm
- Depth: 96 mm
- Accessories (included): Antenna, power supply, headphones
|
Audio-Technicaʼs System 10 Stompbox digital high-fidelity guitar wireless system combines the advanced 24-bit operation, easy setup and clear, natural sound quality of other System 10 configurations with unique functionality for guitarists, bassists and other instrumentalists. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 Stompbox offers a rugged, metal, pedal board-mountable receiver with foot switch, two switched TRS balanced 1/4" outputs and an output mode selector. With the tap of a foot, musicians can toggle between outputs (e.g., for switching amps) or mute and unmute one output without muting the other (e.g., for convenient tuning). And a single receiver can be paired with up to eight UniPak® body-pack transmitters, allowing users to easily switch between instruments without having to move a body-pack from one instrument to the next.
System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.
Each Stompbox system includes an ATW-R1500 Stompbox receiver, an ATW-T1001 UniPak body-pack transmitter with an AT-GcW guitar cable, and hook & loop strips for adding receiver to an effects pedal board. The ATW-R1500 is a digital receiver with sturdy, metal-body construction, easy-to-read digital ID and transmitter battery level displays, and AF Peak and Pair indicator lights.
- Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- 2.4 GHz range – completely free from TV interference
- Three levels of diversity assurance: frequency, time, & space
- Two switched TRS balanced 1/4" output jacks
- Output mode selector and foot switch to toggle between outputs or mute/unmute Output A without muting Output B (e.g., for use with tuner)
- Multi-pairing function to link a single receiver with up to eight body-pack transmitters
- Transmitter battery level display on receiver
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync, and setup
- State-of-the-art digital receiver housed in a strong, metal, stompbox-style body for reliable performance and pedal board mounting
- Included hook & loop strips for adding receiver to effects pedal board
- Universal (center + or -) 9v–12v DC input
OVERALL SYSTEM SPECIFICATIONS - Operating Frequencies: 2.4 GHz ISM band
- Dynamic Range: >109 dB (A-weighted), typical
- Total Harmonic Distortion: 7 hours (alkaline)
- Depending on battery type and use pattern
Dimensions: 70.2 mm (2.76“) W x 107.0 mm (4.21“) H x 24.9 mm (0.98“) DNet Weight: 100 grams (3.5 oz) without batteriesAccessory Included: AT-GcW Guitar Input Cable
| General Characteristics:
- Digital Wireless Microphone Transceiver System
- Works without battery or mains power
- For use with dynamic microphones
- Integrated rechargeable lithium battery
- Range up to 20 m / 70 ft (without obstacles)
- Frequency bandwidth: 20 Hz - 20 kHz
- Latency: <5 ms
- 6 Switchable channels
- 24-Bit / 48 kHz A / D converter
- 2.4 GHz ISM worldwide usable frequency band
- 110 dB Dynamic bandwidth
- Signal to Noise Ratio: 110 dB
- Up to 5 hours of battery life per charge
- ON button on the transmitter
- Power switch on the receiver
- Mic / Line button on the transmitter
- Channel dial button
- Robust ABS housing
- Micro USB charging port
- Weight per unit: 95 g
Delivery Includes:
- XLR female plug-on transmitter
- XLR male plug-on receiver
- USB charging cable
Note: does not provide phantom power. |
Reviews
There are no reviews yet.