| Content |
The ES905CL is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its rigid-pipe design with ball-in-socket base permits flexible positioning, while its durable metal base mounts to a table, desk or podium with included hardware. The attached wire mesh windscreen with internal pop protection effectively reduces noise from P-pops, wind, and ventilation air currents. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES905CL also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone's low-profile element provides a uniform cardioid polar pattern with a 120º acceptance angle. Power module included.
- Designed for high-quality sound reinforcement, professional recording and broadcasting
- Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
- Rigid-pipe design with ball-in-socket base permits flexible positioning
- Sturdy metal base mounts to table, desk or podium with included hardware
- Superior off-axis rejection for maximum gain before feedback
- Requires 11V to 52V DC phantom power
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- RoHS compliant - free from all substances specified in the EU directive on hazardous substances
ES905CL Declaration of Conformity 49 KB
|
Supplied ceiling-mounting brackets facilitate installation.
Equipped with power indicator LED.
The IR-510R covers a practical radius of approx. 8 m.
| Specification |
|
|---|
| Power Source | 24V DC (Supplied from the optional IR-702T) | | Current Consumption | Max.60mA | | Infrared Detector | | | Wavelength | 870nm | | Carrier Frequency | Channel A:3.100MHz/Channel B:3.350MHz | | Reception Area | Practical radius of approx. 8 m in a space without any obstacle | | Connection Terminal | 75 Ω, BNC jack | | Operating Temperature | 0ºC to +40ºC | | Operating Humidity | 30% to 85% RH | | Finish | Case: Polycarbonate resin, visible light cut filter Base: ABS resin, black | | Dimensions | 120 x 71.3 (H) mm | | Weight | 205g (unit only) |
| |
- Base Station for up to 200 Microphone Stations
- Intuitive controls
- Superior audio quality
- Voice activation and NOM limitation
- Standard ins and outs for external equipment
The CS 2 Base Station controls up to 200 Microphone Stations and provides automatic NOM (Number of Open Microphones) attenuation. System gain will decrease by approx. 3 dB every time the number of open microphone doubles. The result is a substantially lower risk of feedback even if the number of open microphones varies constantly.
A selectable Voice Activation function turns the microphones on automatically as soon as they are talked into.
The NOM Limitation function allows the number of simultaneously open microphones to be limited to one, two, three, four, or five. This function can be locally disabled on each Microphone Station so a specific microphone, e.g., one mounted on a lectern, will come on every time, no matter how many mics may be open already. |
- System Features and Outline
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATION:
| Power Source | 100-240 V AC, 50/60Hz (supplied from AC adapter (accessory)) | | Power Consumption | 72W | | Input | MIC: -60 dB*, 600O,unbalanced, phone jackAUX: -20 dB*, 10 kO,unbalanced, phone jack | | Output | REC: -20 dB＊, 10 kΩ, unbalanced, phone jack, RCA pin jack HEADPHONE: Mini jack | | Number of Connectable Chairman/Delegate Units | 64 units | | Number of Connectable Infrared Transmitter/Receiver Units | 4 units (up to 16 units by using four Distributors) | | Infrared Transmitter/Receiver I/O Terminal | 4 BNC jacks | | External Control Terminal | D-sub connector (9 P, male) | | LED Indicator | Audio signal receiving indicators 1-4 CH,Data signal receiving indicator, External control priority indicator, External control communication indicator, Power indicator, Battery indicator (flashes when a Chairman/Delegate unit's battery nears complete discharge) | | Function Switch | Simultaneous speaker No. setting switch: 1/2/4 Mic-off setting switch: TIME OUT ON/OFF
Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the subsequent units) | | Operating Temperature | 0º to＋40º | | Finish | Panel: Surface-treated steel plate, gray metallic, paint, semi-gloss | | Weight | 2.7kg | | Accessory | AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord)…1 | | Option | Rack mounting bracket: MB-TS900 | | | ＊0dB=1V |
|
- Choice of microphones for every kind of system and room acoustics.
- Ease of use.
- 3+1 languages selectable for two users.
- Yes-No-Voting function.
The CS 5 DU is the basic microphone station for use in discussion systems.
Like all other CS 5 microphone stations, the CS 5 DU provides maximum acoustic flexibility. Choose from two goosenecks of different lengths and five microphones with different polar patterns to meet every requirement of any type of conference system.
In addition to the usual PTT key, this microphone station offers two advanced features previously found on more expensive conferencing equipment only: A bank of dip switches allows each headphone output to be assigned independently to either the floor channel or one of three interpreted language channels. The PTT key also provides a simple yes/no voting function.
Gooseneck, capsule and connecting cable are not included.
It shall have a built-in microphone and loudspeaker, which allow the forwarding of the voice of the speaker towards the other units of the system. The CS 5 DU shall be capable for 1 step voting from the unit with the help of the speech button.
The CS 5 DU is suitable for taking over maximum 3 interpreted languages and the room voice as well, which may be selected via a set of DIP switches on the bottom of the unit. The unit shall operate for 2 persons simultaneously, with independent adjustable languages for each of the 2 x 3,5mm stereo jack headphone sockets.
|
Reviews
There are no reviews yet.