Audio Technica ES933H Hypercardioid condenser hanging microphone

With durable construction and unobtrusive appearance, the ES933H offers versatile solutions for speech, theater, orchestra and choir sound reinforcement and recording. The microphone's low-profile element provides a uniform hypercardioid polar pattern with 100º acceptance angle. Available in two colors: black (ES933H); white (ES933WH), the microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES933H also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.

• Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
• Small size and excellent response are ideal for suspension over choirs, instrumental groups and theater stages
• Low-profile element provides uniform hypercardioid polar pattern with 100º acceptance angle
• Available interchangeable elements permit angle of acceptance from 90º to 360º
• Superior off-axis rejection for maximum gain before feedback
• Requires 11V to 52V DC phantom power
• UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Available in two colors: black (ES933H) and white (ES933WH)
• RoHS compliant - free from all substances specified in the EU directive on hazardous substances

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Hypercardioid
• Frequency Response: 80-20,000 Hz
• Low Frequency Roll Off: 80 Hz, 18 dB/octave
• Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa
• Impedance: 250 ohms
• Maximum Input Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range: 109 dB, 1 kHz at Max SPL
• Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
• Phantom Power Requiremens: 11-52V DC, 2 mA typical
• Switch: Flat, roll-off
• Cable: 15.2 m (50') long (permanently attached to microphone), 3.2 mm (0.13“) diameter, 2-conductor shielded cable, terminated with TA3F-type connector
• Accessories: ES933H: AT8109 two-stage foam windscreen; AT8452 steel hanger ES933WH: AT8109(WH) two-stage foam windscreen; AT8452(WH) steel hanger Both: AT8538 power module

• PA microphone with rugged, all-metal body
• Frequency response optimized for intelligibility
• Long useful life even in tough day-to-day usage
• Frequency response tailored to speech use

The DST 99 S is mounted on a table stand with an on/off switch and coiled cable with 3-pin XLR connector.

Ticket window, bank counter
Reception desk, restaurant
Houses of worship

Polar pattern    cardioid
Frequency range    150-15,000 Hz
Sensitivity    2.2 mV/Pa (-54 dBV)
Max. SPL    133 dB (1% THD)
Equivalent noise level    21 dB-A
Signal/noise ratio (A-weighted)    73 dB
Impedance    530 ohms
Recommended load impedance    >2,000 ohms
Connector    3-pin male XLR
Finish    matte black
Net weight    805 g (1.8 lbs.)
Shipping weight    1,125 g (2.5 lbs.)

Shure MX418D-C Gooseneck Cardioid Condenser Microphone

Microflex? Gooseneck microphones bring a whole new meaning to the word flexible
with their fully adjustable gooseneck. Designed for easy replacement and available in
cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges
offer wide frequency response and accurate sound reproduction for a wide variety of applications
such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges
fit every model in the Microflex product line for enhanced convenience and consistent sound.

Microflex Gooseneck microphones are available in four models with a variety of heights and mounting
styles to choose from. One model includes a silent mute switch with LED indicator, a Shure Microflex
exclusive. And every Microflex Gooseneck features high sensitivity and balanced, transformerless output
for maximum resistance to electromagnetic hum and RF interference, even over long cable runs.

Desktop Base with 10 foot Cable, Logic Functions, Programmable Switch and LED Indicator, Snap-Fit Foam Windscreen

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to noise over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (M412D/MX418D)
New brighter LED improves visibility under strong ambient lighting M412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers M412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SW/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SW/MX418SE)

Microphone Specifications:
 
Frequency Response
50 to 17,000 Hz
Output Impedance
180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*)
Cardioid: -35.0 dBV/Pa (17.8 mV)
Supercardioid: -33.5 dBV/Pa (21.1 mV)
Omnidirectional: -27.5 dBV/Pa (42.2 mV)
All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)
Cardioid: 28.0 dB SPL
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
Cardioid: 66.0 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
Dynamic Range at 1 k ohm load
96.2 dB
100 dB at 0 gain
Common Mode Rejection
45.0 dB minimum
Preamplifier Output Clipping Level (1% THD)
-6.0 dBV (0.5 V)
-12 dBV at 0 gain
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements
11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity: 0 to 95%

Recommended For:

• Brass
• Drums
• Percussions
• Woodwinds

Features:

• Miniature condenser clip-on microphone for wind instruments, drums, and percussions
• Miniature gooseneck for accurate microphone alignment
• Including wireless direct adapter for easy use with AKG pocket transmitters
• Detachable microphone cable
• Transducer shock mount for high mechanical-noise rejection

Standard Accessories:

• A400 adapter
• Microphone bag
• W44 Windscreen

Specs:

• Polar pattern cardioid
• Frequency range 60 Hz to 20 kHz
• Sensitivity 5 mV/Pa (-46 dBV)
• Max. SPL 130/132 dB SPL (for 1 %/3 % THD)
• Equivalent noise level 31 dB(A)
• Signal/noise ratio (A-weighted) 63 dB
• Impedance = 2000 ohms
• Current consumption

Features:

• Miniature cardioid condenser clamp-on microphone with shock mounted capsule
• Ideal for miking drums and percussions
• Including wireless direct adapter for easy use with AKG pocket transmitters
• Detachable microphone cable
• Integrated gooseneck
• Continuously adjustable vise type clamp

Recommended For:

• Drums
• Brass
• Recording
• Percussions

Standard Accessories:

• A400 adapter
• H518 Drum bracket
• Microphone bag
• W44 Windscreen

Specs:

• Polar pattern cardioid
• Frequency range 60 Hz to 20 kHz
• Sensitivity 5 mV/Pa (-46 dBV)
• Max. SPL 130/132 dB SPL (for 1%/3% THD)
• Equivalent noise level 31 dB(A)
• Signal/noise ratio (A-weighted) 63 dB
• Impedance = 2000 ohms
• Current consumption