Audio Technica U853R Cardioid condenser hanging microphone

280.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: U853R Category:
Perfect for speech, theater, orchestra and choir sound reinforcement and recording, the U853R cardioid condenser hanging microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference. With a consistent cardioid polar pattern, the mic offers natural sound from any angle, and superior gain before feedback. It is phantom powered and features […]

 

Read more

Perfect for speech, theater, orchestra and choir sound reinforcement and recording, the U853R cardioid condenser hanging microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference. With a consistent cardioid polar pattern, the mic offers natural sound from any angle, and superior gain before feedback. It is phantom powered and features an integral 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns.
  • Designed for suspension over choirs, instrumental groups and theater stages
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
  • Low-profile design with low-reflectance finish for minimum visibility
  • Available in two colors: black (U853R) and white (U853RW)
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 39 dB (11.2 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 115 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Switch: Flat, roll-off
  • Cable: 25.0′ (7.6 m) long (permanently attached to microphone), 0.13″ (3.2 mm) diameter, 2 conductor shielded cable with TA3F-type connector
  • Accessories: AT8153 two-stage foam windscreen; AT8451 steel hanger; AT8538 power module; AT8438 5/8“-27 stand adapter
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica U853R Cardioid condenser hanging microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica U853R Cardioid condenser hanging microphone removeAKG CGN 99H/S 38cm Hypercardioid Gooseneck Microphone removeAKG DGN 99E dynamic cardioid Gooseneck Microphone WITH XLR removeAKG GN 30OC MODULE GOOSENECK 30cm LED removeAKG CGN 99 C/L 58cm Hypercardioid Gooseneck Microphone removeAKG C 518 M Miniature Cardioid Condenser Microphone remove
NameAudio Technica U853R Cardioid condenser hanging microphone removeAKG CGN 99H/S 38cm Hypercardioid Gooseneck Microphone removeAKG DGN 99E dynamic cardioid Gooseneck Microphone WITH XLR removeAKG GN 30OC MODULE GOOSENECK 30cm LED removeAKG CGN 99 C/L 58cm Hypercardioid Gooseneck Microphone removeAKG C 518 M Miniature Cardioid Condenser Microphone remove
ImageAKG CGN 99HS 38cm Hypercardioid Gooseneck Microphone-artsoundAKG CGN_99C_L_b
SKUU853RCGN 99H/SDGN 99EGN 30OCCGN 99C/LC 518 M
Rating
Price 280.00 incl. GR VAT149.00 incl. GR VAT 178.99 incl. GR VAT 180.00 incl. GR VAT 149.00 incl. GR VAT 264.00 incl. GR VAT
Stock

In stock

Only 2 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

In stock

AvailabilityIn stockOnly 2 left in stock (can be backordered)Available on backorderAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentPerfect for speech, theater, orchestra and choir sound reinforcement and recording, the U853R cardioid condenser hanging microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference. With a consistent cardioid polar pattern, the mic offers natural sound from any angle, and superior gain before feedback. It is phantom powered and features an integral 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns.
  • Designed for suspension over choirs, instrumental groups and theater stages
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
  • Low-profile design with low-reflectance finish for minimum visibility
  • Available in two colors: black (U853R) and white (U853RW)
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 39 dB (11.2 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 115 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Switch: Flat, roll-off
  • Cable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2 conductor shielded cable with TA3F-type connector
  • Accessories: AT8153 two-stage foam windscreen; AT8451 steel hanger; AT8538 power module; AT8438 5/8“-27 stand adapter
  • Hypercardioid polar pattern
  • 38 cm  long
  • 95° pickup angle
  • For acoustically difficult environments
  • Connects easily via XLR connector
The hypercardioid polar pattern with its narrow 95° pickup angle is suited best for situations where noise typically occurs from all sides (particularly in worship centers), where people talk into the microphone from a greater distance, or where several talkers are grouped side by side. Two different lengths are available. The .exible joint ensures optimum alignment of the gooseneck to any talker position. Several options are available for installation, i.e., stand, tabletop installation, and lockable. Choosing polar patterns Selecting the correct polar pattern for installed sound is difficult since it depends on a variety of factors. Of course the acoustics of the room play a key role. For highly reverberant rooms such as worship centers, a hypercardioid polar pattern will be the best choice to avoid high levels of unwanted noise. Correct placement of the loudspeakers is also essential. If the speakers project right at the capsule, a hypercardioid will be your best bet. The most difficult task, however, is trying to judge how the talkers will behave. For talkers who are inexperienced or move around a lot, be sure to choose a cardioid polar pattern for reliable pickup; talkers at a greater distance from the mic will be served best by a hypercardioid. The microphone shall be a hypercardioid gooseneck microphone. Its pickup angle shall be 95 degrees; frequency range 50 Hz to 19 kHz; sensitivity 12 mV/Pa; max. SPL 125 dB; electrical impedance
Polar pattern Hypercardioid
Frequency range 50 to 19,000 Hz
Sensitivity 12 mV/PA = -38 dBV re 1 V/Pa
Max. SPL 125 dB (for 1% THD)
Equivalent noise level
Signal/noise ratio (A-weighted) >73 dB
Impedance =2,000 ohms
Supply voltage English: 9 to 52 V phantom power to IEC 61938 (DPA adapter integrated)
Powering
Connector 3-pin male XLR
Finish matte black
Dimensions CGN 99 H/S: 13.5 x 380 mm (0.5 x 15 in.); CGN 99 H/L: 13.5 x 580 mm (0.5 x 23 in.)
Net weight CGN 99 H/S: 480 g (17 oz.); CGN 99 H/L: 500 g (17.7 oz.)
  • PA microphone with rugged, all-metal body
  • Frequency response optimized for intelligibility
  • Long useful life even in tough day-to-day usage
  • Frequency response tailored to speech use
Rugged, affordable dynamic cardioid gooseneck microphone for general public address and communications use. The DGN 99 provides a frequency response tailored to speech use for optimum intelligibility as well as good offaxis rejection for high gain before feedback and suppression of unwanted ambient noise. The all-metal body ensures a long useful life for the microphone even in tough day-to-day use.

The DGN 99 E features a built-in XLR connector for quick connection, while the DGN 99 has been designed for permanent (single-hole or screw-on) installation and comes with a 6-ft. 4-in. (2-m) fixed, unterminated cable.

 

Ticket window, bank counter
Reception desk, restaurant
Houses of worship

AKG GN 30 OC., 12 inch gooseneck for D.A.M.-microphone capsules, 3/8“-connector, programmable indicator LED, incl. 10ft. cable to open-end, black, for installations

Polar pattern    Cardioid Frequency range    70 to 18,000 Hz Max. SPL    125 dB (for 1% THD) Equivalent noise level    73 dB Impedance    =2,000 ohms Supply voltage    9 to 52 V phantom power to IEC 61938 (DPA adapter integrated) Powering

Features:

  • Miniature cardioid condenser clamp-on microphone with shock mounted capsule
  • Ideal for miking drums and percussions
  • Including wireless direct adapter for easy use with AKG pocket transmitters
  • Detachable microphone cable
  • Integrated gooseneck
  • Continuously adjustable vise type clamp

Recommended For:

  • Drums
  • Brass
  • Recording
  • Percussions

Standard Accessories:

  • A400 adapter
  • H518 Drum bracket
  • Microphone bag
  • W44 Windscreen

Specs:

  • Polar pattern cardioid
  • Frequency range 60 Hz to 20 kHz
  • Sensitivity 5 mV/Pa (-46 dBV)
  • Max. SPL 130/132 dB SPL (for 1%/3% THD)
  • Equivalent noise level 31 dB(A)
  • Signal/noise ratio (A-weighted) 63 dB
  • Impedance = 2000 ohms
  • Current consumption
Weight0.10 kg0.48 kg0.48 kg0.50 kg0.50 kg0.45 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.48 kg
Weight 0.48 kg
Weight 0.50 kg
Weight 0.50 kg
Weight 0.45 kg