M3 IEM Brochure 989 KB M3 Owners Manual 6.24 MB M3 License Options 403 KB M3 Declaration of Conformity 221 KB Audio-Technica’s advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. […]
Audio-Technica’s advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. The stereo monitor system is equipped with Audio-Technica’s versatile Personal Mix Control, which gives allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver. While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/¼” combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.
M3 Components
EP3 Headphones
In-ear dynamic headphones offer high-fidelity sound and excellent isolation
M3T Stereo Transmitter
Wireless UHF transmitter (frequency-agile) offers LCD display and 1321 user-selectable frequencies
M3R Stereo Receiver
Personal Mix Control in a lightweight body-pack with backlit LCD display
High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
1321 selectable UHF channels with automatic frequency scanning
Up to 16 simultaneous systems per frequency band
Three receiver modes: Personal Mix, stereo, and mono
Personal Mix Control allows volume and mix control of two independent signals at the receiver
LCD information display offers step-through menus for setting preferences
XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
Adjustable squelch eliminates annoying static
Pilot tone protects against RF interference when transmitter is turned off
Multi-level limiter (defeatable) helps protect hearing from sudden peaks
Portable system is quick to load and set up
Reduces on-stage audio clutter for better overall mix & less feedback
Use any number of Stereo Receivers (with individual mixes) on the same frequency
Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
Personal fit with 3 sizes of rubber eartips plus an ear-conforming foam tip
Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input
Overall Specifications
Operating Frequencies: Band E: 790.000 to 822.000 MHz, 1281 frequencies
Band F: 832.000 to 865.000 MHz, 1282 frequencies
Band L: 575.000 to 608.000 MHz, 1321 frequencies
Band M: 614.000 to 647.000 MHz, 1321 frequencies Not all frequency bands available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM stereo
Maximum Deviation: ±40 kHz
Dynamic Range: 90 dB (typical), A-weighted
Total Harmonic Distortion:
Weight
1.00 kg
Reviews
There are no reviews yet.
Be the first to review “Audio Technica M3 Wireless in-ear monitor system” Cancel reply
Reliable in-ear monitoring with more than 100 m range
96 available channels
2, 10 or 30 mW ERP selectable transmission power
Convenient infrared frequency syncing
Individual user name assignment and memory for 10 custom presets
Extended frequency response
3-band EQ with parametric mids
Switchable limiter
Stereo, focus and mono modes of operation
High-contrast OLED display
Transmitter with direct monitoring headphone output
Bodypack receiver with three selectable squelch levels
10 h of bodypack receiver operation on two AA batteries
Simultaneous operation of up to 12 systems
U500® IEM transmitter compatible with U300® IEM bodypacks
Content
M3 IEM Brochure 989 KB
M3 Owners Manual 6.24 MB
M3 License Options 403 KB
M3 Declaration of Conformity 221 KB
Audio-Technica's advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. The stereo monitor system is equipped with Audio-Technica's versatile Personal Mix Control, which gives allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver. While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/¼" combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.
M3 Components
EP3 Headphones
In-ear dynamic headphones offer high-fidelity sound and excellent isolation
M3T Stereo Transmitter
Wireless UHF transmitter (frequency-agile) offers LCD display and 1321 user-selectable frequencies
M3R Stereo Receiver
Personal Mix Control in a lightweight body-pack with backlit LCD display
High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
1321 selectable UHF channels with automatic frequency scanning
Up to 16 simultaneous systems per frequency band
Three receiver modes: Personal Mix, stereo, and mono
Personal Mix Control allows volume and mix control of two independent signals at the receiver
LCD information display offers step-through menus for setting preferences
XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
Adjustable squelch eliminates annoying static
Pilot tone protects against RF interference when transmitter is turned off
Multi-level limiter (defeatable) helps protect hearing from sudden peaks
Portable system is quick to load and set up
Reduces on-stage audio clutter for better overall mix & less feedback
Use any number of Stereo Receivers (with individual mixes) on the same frequency
Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
Personal fit with 3 sizes of rubber eartips plus an ear-conforming foam tip
Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input
Overall Specifications
Operating Frequencies: Band E: 790.000 to 822.000 MHz, 1281 frequencies
Band F: 832.000 to 865.000 MHz, 1282 frequencies
Band L: 575.000 to 608.000 MHz, 1321 frequencies
Band M: 614.000 to 647.000 MHz, 1321 frequencies Not all frequency bands available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM stereo
Maximum Deviation: ±40 kHz
Dynamic Range: 90 dB (typical), A-weighted
Total Harmonic Distortion:
The new LD Systems MEI 1000 G2 B 6 is a In-Ear Monitoring-System with 96 UHF channels that delivers outstanding sound quality with a large dynamic range and outstanding crosstalk behaviour in the 655 - 679 Mhz frequency band.
Switchable mono, stereo, and focus monitoring modes as well as adjustable EQ and limiter functions permit natural sound reproduction for any application, with a frequency response of 60 Hz – 16 kHz, a high S/N ratio, and low THD. The LD MEI 1000 G2 permits simultaneous operation of up to 5 systems.
The earphones are very comfortable to wear, and the multifunctional display on the receiver shows all relevant system information. With high quality batteries, it is possible to attain operating times of 12 hours and more. A 19" rackmount kit and a rugged ABS plastic carrying case complete the MEI 1000 G2 package.
Product type
In-ear Monitoring
Transmission frequency range
655 - 679 MHz
LDMEI1000G2BPRB6 - LD Systems MEI 1000 G2 BPR B 6 Receiver for LDMEI1000G2 In-Ear Monitoring System band 6 655 - 679 MHz
Product type
In-ear Monitoring Accessories
Type
Receivers
Channels
2 x 96 (8 groups of 12 channels)
Transmission method
FM, stereo
Frequency response
60 - 16000lx @ 1m Hz
THD
< 1 %
Audio output
3.5 mm TRS
Max. audio output level
100 mW
Indicators
Power
Operating time
> 12 hrs., battery-dependent
Controls
volume
Operating voltage
2 x 1.5 V AA
Features
incl. batteries
Width
65 mm
Height
90 mm
Depth
24 mm
Weight
0,1 kg
LDMEI1000G2TB6 - LD Systems MEI 1000 G2 T B 6 Transmitter for LDMEI1000G2 In-Ear Monitoring System band 6 655 - 679 MHz
Type
Transmitters
Channels
96 (8 groups of 12 channels)
Rated HF output power
10 mW
Signal-to-noise ratio
85 dB
Inputs
2
Input connectors
XLR
Input impedance (kOhms)
14 kOhm
Antenna connector
TNC
Controls
volume headphone
Operating voltage
12 - 18 V DC
Width
200 mm
Height
44 mm
Depth
96 mm
Weight
1,2 kg
Accessories (included)
power supply
The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.
The earphones have been designed for a high wearing comfort, and a multifunction display provides all the relevant system information. Operation time exceeds 12h with high quality batteries. A 19" rackmount kit and a rugged ABS plastic carrying case complete the MEI 1000 G2 package.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
Model name: LDMEI1000G2BPR
Product type: Belt pack receiver
Radio frequency range: 823 - 832 and 863 - 865 MHz
Channels: 96 (8 groups of 12 channels)
Transmission method: FM, stereo
Frequency response: 60 Hz - 16 kHz
S/N ratio: 80 dB
THD: < 1 %
Audio outputs: 3.5 mm jack
Max. audio output level: 100 mW
Controls: Up, Down, Escape, Set, Volume
Indicators: LC Display, Low Battery, Power
Power supply: 2 x 1.5 V AA
Operating time: > 13 hrs., battery-dependent
Width: 65 mm
Height: 90 mm
Depth: 24 mm
Model name: LDMEI1000G2T
Product type: Transmitter
Radio frequency range: 823 - 832 and 863 - 865 MHz
Channels: 96 (8 groups of 12 channels)
Transmission method: FM, stereo
RF output: 10 mW
Frequency response: 60 Hz - 16 kHz
S/N ratio: 85 dB
Inputs: 2
Input connections: XLR/ 6.3 mm jack (combo)
Input impedance: 14 kOhm
Antenna connector: TNC
Controls: up, down, set, power, volume headphone, input level, pad
Indicators: LC display
Power supply: 12 - 18 V DC
Width: 200 mm
Height: 44 mm
Depth: 96 mm
Accessories (included): Antenna, power supply, headphones
Move freely on stage while the perfect monitor mix is delivered directly to your ears: the amazing performance and reliability of the U500® In-Ear Monitoring Systems will surpass your expectations for certain. Designed with the pro user in mind, they feature advanced technology, contemporary looks and straightforward operation.
U500® In-Ear Systems provide a selection of 96 channels and 2, 10 or 30 mW RF output power for a transmission range greater than 100 m. For quick and trouble-free setup, they allow for convenient infrared synchronisation of transmitter and receiver. U500® In-Ears sport high-contrast OLED displays and allow for individual user name assignment. In addition, you can save 10 custom presets.
To deliver pristine, precise audio U500® In-Ear Monitoring Systems include a 3-band EQ with parametric mids, a switchable limiter and a squelch circuit. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. With a signal-to-noise ratio greater than 95 dB and less than 0,3% THD, the U500® In-Ear's noise floor is exceptionally low.
Drawing little current only, the U500® Bodypack Receiver operates up to 10 hours on two AA batteries. A volume control allows convenient in-performance monitoring level adjustment. Three selectable squelch levels ensure optimum performance at all times.
U500® In-Ear Monitoring Systems are available for operation in five frequency ranges. The 470 - 490 MHz, 514 - 542 MHz, 584 - 608 MHz and 655 - 679 MHz bands permit running up to 12 systems simultaneously. In the 823 - 832 MHz + 863 - 865 MHz range six systems can be operated at the same time providing wireless monitoring for your entire band.
Product type
In-ear Monitoring
Type
Set
Weight
0,755 kg
LDIEHP2 - LD Systems IE HP 2 Professional In-Ear Headphones
Product type
Headphones
Type
Stereo-In-Ear Headphones
Converter principle
Dynamic
Impedance
32 Ohm(s)
Frequency response
20 - 18000 Hz
Connection type
3.5 mm TRS
Cable length
1.55 m
Weight
0,022 kg
Accessories (included)
3 pairs of foam earpieces , 3 pairs of silicone earpieces , Transport case
LDU506IEMR - LD Systems U506 IEM R Receiver
Product type
In-ear Monitoring Accessories
Transmission frequency range
655 - 679 MHz
Type
Receivers
Transmission method
FM, mono/stereo
Frequency response
40 - 16000 Hz
Audio output
3.5 mm TRS
Max. audio output level
33 mW @ 16 Ohm mW , 80 mW @ 33 Ohm mW
Indicators
Multifunctional OLED-Display , RF (LED)
Operating time
< 10 hours
Antenna connector
Fixed to housing
Controls
Down , On / Off , Up , volume
Operating voltage
2 x 1.5 V AA
Width
64 mm
Features
battery status LED
Height
100 mm
Depth
24 mm
Weight
0,095 kg
Accessories (included)
2 x AA batteries , Antenna
LDU506IEMT - LD Systems U506 IEM T Transmitter
Type
Transmitters
Channels
12
Modes of operation
focus/mono/stereo
Rated HF output power
Variable (2mW, 10mW, 30mW)
Signal-to-noise ratio
93 dB
Total Harmonic Distortion (THD)
0.3 %
Dynamic range
88 dB
Inputs
2
Input connectors
Combo TRS 6.3 mm , XLR (balanced)
Input impedance (kOhms)
12 kOhm
Antenna connector
BNC
Controls
Menu selector Button , Power On/Off , volume headphones
Operating voltage
12 - 18 V DC
Width
212 mm
Height
43 mm
Depth
123 mm
Weight
0,641 kg
Accessories (included)
19" Rack mount kit , BNC-Antenna , power adapter
LD Systems U505 IEM HP In-Ear Monitoring System with Earphones - 584 - 608 MHz
Product typeTypeTransmission frequency rangeWeightProduct typeTypeConverter principleImpedanceConnection typeCable lengthFrequency responseWeightAccessories (included)Product typeTypeChannelsModes of operationTransmission methodRated HF output powerFrequency responseSignal-to-noise ratioTotal Harmonic Distortion (THD)Dynamic rangeAntenna connectorInputsControlsInput connectorsInput impedance (kOhms)IndicatorsOperating voltageWidthHeightDepthWeightAccessories (included) Receivers
3.5 mm TRS
3.5 mm TRS
16 Ohm(s)
33 mW @ 16 Ohm mW , 80 mW @ 33 Ohm mW
Fixed to housing
Down , On / Off , Up , volume
RF (LED)
2 x 1.5 V AA
64 mm
100 mm
24 mm
0,095 kg
2 x AA batteries , Antenna
battery status LED
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User's manual [7,82 MB]
Reviews
There are no reviews yet.