AUDIX TM1 Omni-directional test and measurement microphone

307.89 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: TM1 Category:
Omni-directional test and measurement microphone for RTA and software systems. The TM1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use and affordability. Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 is designed to capture acoustic […]

 

Read more

Omni-directional test and measurement microphone for RTA and software systems.

The TM1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use and affordability.

Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 is designed to capture acoustic measurements for room analysis software programs, real time analyzers and other sound control devices. With a flat frequency range of 20 Hz – 25 kHz, the TM1 is an excellent tool for sound engineers, sound companies and recording enthusiasts.

The TM1 is designed, machined, assembled and tested by Audix in the USA.

Model Variation: TM1 PLUS – includes calibration data file and sensitivity, threaded acoustic windscreen, and CA4231 machined calibration adapter *

*Bruel & Kjaer® 4231 sound level calibrator or equivalent

Transducer Pre-polarized Condenser
Polar Pattern Omnidirectional
Frequency Response 20Hz to 25kHz (+/- 2dB)
Dynamic Range (Typical) 112dB
Signal-to-Noise Ratio 66dB
EIN 28dB A-weighted
Maximum Input Sound Level 130dB with distortion
Power Requirements 18 – 52V Phantom
Output Impedance 200 ohms
Output Connectors 3-pin XLR
Sensitivity 6.5mV / Pa @ 1k
Housing 4 Piece Precision Machined Brass
Dimensions Length 5.9″ (150mm)

 

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIX TM1 Omni-directional test and measurement microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIX TM1 Omni-directional test and measurement microphone removeShure DMK57-52 - Drum Mic Kit removeAKG C414-XLS - Large Diaphragm Condenser Microphone with Five P removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeDBX Driverack RTA-M Real Time Analyzer Microphone removePEAVEY PVR2 CONDENSER OMNI MEASURING MICROPHONE remove
NameAUDIX TM1 Omni-directional test and measurement microphone removeShure DMK57-52 - Drum Mic Kit removeAKG C414-XLS - Large Diaphragm Condenser Microphone with Five P removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeDBX Driverack RTA-M Real Time Analyzer Microphone removePEAVEY PVR2 CONDENSER OMNI MEASURING MICROPHONE remove
ImageSHURE BETA-57A - Instrument Microphone 50Hz to 16kHzPEAVEY PVR2 CONDENSER OMNI MEASURING MICROPHONE
SKUTM1DMK57-52C414-XLSBETA57ADBX DRIVERACK RTA-M550.PVY.100
Rating
Price 307.89 incl. GR VAT 627.00 incl. GR VAT1,116.00 incl. GR VAT 175.00 incl. GR VAT 135.00 incl. GR VAT 149.00 incl. GR VAT
Stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

In stock

In stock

AvailabilityIn stockOnly 1 left in stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)In stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Omni-directional test and measurement microphone for RTA and software systems.

The TM1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use and affordability.

Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 is designed to capture acoustic measurements for room analysis software programs, real time analyzers and other sound control devices. With a flat frequency range of 20 Hz – 25 kHz, the TM1 is an excellent tool for sound engineers, sound companies and recording enthusiasts.

The TM1 is designed, machined, assembled and tested by Audix in the USA.

Model Variation: TM1 PLUS - includes calibration data file and sensitivity, threaded acoustic windscreen, and CA4231 machined calibration adapter *

*Bruel & Kjaer® 4231 sound level calibrator or equivalent

Transducer Pre-polarized Condenser
Polar Pattern Omnidirectional
Frequency Response 20Hz to 25kHz (+/- 2dB)
Dynamic Range (Typical) 112dB
Signal-to-Noise Ratio 66dB
EIN 28dB A-weighted
Maximum Input Sound Level 130dB with distortion
Power Requirements 18 - 52V Phantom
Output Impedance 200 ohms
Output Connectors 3-pin XLR
Sensitivity 6.5mV / Pa @ 1k
Housing 4 Piece Precision Machined Brass
Dimensions Length 5.9" (150mm)

 

The DMK57-52 Drum Mic Kit is a conveniently packaged selection of microphones and mounts, designed to offer a complete core package of microphones for recording and performing drummers at a great price. The Drum Mic Kit includes three SM57 microphones, one Beta 52 microphone, three A56D drum-mounting systems, and a lightweight and durable carrying case.

  • The industry standard for snare drum, and a reliable and high-performing choice for toms, Shure's cardioid dynamic SM57 microphone features a contoured frequency response that cuts through the mix with exceptional impact, while reproducing sound accurately.

  • Perfect for the kick drum, the supercardioid Beta 52? derives its low-end punch and sonic presence from a carefully tailored frequency response. Equipped with its own pneumatic shock mount, the Beta 52 is additionally designed with an integral locking stand mount for quick-and-easy set up.

  • A key element of the kit, Shure's A56D universal drum mounting system can be used to position microphones virtually anywhere -- on drum rims, microphone stands, even cymbal stands. Designed with captive parts to prevent the loss of individual pieces, the A56D is small, secure, and can be used with any standard microphone, making it a great tool for both stage and studio environments.
  • The C 414 B/XLS has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. The C 414B/XLS is designed to deliver accurate pickup of all acoustic instruments and voices. The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid, wide cardioid, hypercardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6 dB, -12 dB and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414 B/XLS has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6-dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A. The C 414 B/XLS has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems. It comes complete in an all-metal road case with the AKG H-85 shock mount, a PF80 external two-stage pop filter, a W414X external windscreen and an individually-measured chart showing the response curve of the microphone. It is also available in factory-matched stereo pairs packaged with a H50 stereo bar instead of the external pop filter. The C 414B/XLS is built in Vienna, Austria and comes with a three-year limited parts and labor warranty. Features High sensitivity and extremely low self noise Five switchable polar patterns for placement and application flexibility Two-color LEDs provide quick visual indication of selected polar pattern and output overload Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration H 85 professional shock mount/stand adapter, PF 80 external pop filter and W 414 X external windscreen High sound pressure level capability and wide dynamic range Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions Optional R 414 remote control unit (available by the end of 2004) offers full control of all switchable parameters via standard microphone cable and 3-pin XLR-type connectors Specifications Type: 1" large diaphragm pressure gradient microphone Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight Frequency Range: 20 to 20,000 Hz Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB) Preattenuation Pad: -6, -12,-18 dB, switchable Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz Power Requirements: 48 V phantom power to DIN/IEC Connector: 3-pin XLR Dimensions: 2" x 1.5" x 6.3“ Net Weight: 10.6 oz Shipping Weight: 5 lbs (2.27 kg)Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. The Beta 57A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. A completely new grille design lets you take better advantage of proximity effect. The Beta 57A is an exceptionally versatile microphone. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
    • Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
    • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
    • Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
    • Neodymium magnet for high signal-to-noise ratio output
    • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
    • Frequency response: 50 to 16,000 Hz
    Suggested Applications Guitar Amp Bass Amp Acoustic Guitar Brass/Saxophone Snare Drums Rack/Floor Toms Congas Woodwinds Lead Vocals
    Omni-directional, flat frequency, measurement microphone.Omni-directional microphone for free-field measurement. With a highly reliable circuit and a 1/4" pre-polarized condenser capsule, it boasts high stability, low distortion and low noise in performance. Its excellent flat frequency response makes it ideal for sonic analysis systems and recording. Features:
    • Flat response, excellent electro-acoustical characteristics
    • Ideal for room analysis systems, measurement, testing and recording
    • Standard 1/2" measurement diameter
    • Type: Back-electret condenser mic
    • Pickup Pattern: Omni-directional
    • Frequency Response: 20~ 20000Hz
    • Sensitivity: -37dBV/Pa (14mV/Pa)
    • Rated Impedance: 200 ohm
    • Max. SPL: 132dB
    • Signal-to-noise Ratio: >70 dB
    • Power Supply: 9~52V Phantom power
    • Current Consumption: 2mA
    • Connector: 3-pin XLR gold-plated
    • Weight: 150g (5.3 oz)
    • Weight Unpacked: 1.17 lb(0.53 kg)
    • Weight Packed: 1.17 lb(0.53 kg)
    • Width Packed: 4.75“(12.065 cm)
    • Depth Packed: 12“(30.48 cm)
    • Height Packed: 3“(7.62 cm)
    Weight1.00 kg2.00 kg2.27 kg0.50 kg0.50 kg0.53 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 1.00 kg
    Weight 2.00 kg
    Weight 2.27 kg
    Weight 0.50 kg
    Weight 0.50 kg
    Weight 0.53 kg