Manual Axel Compact telephone hybrid BoxTel MKII AXEL Compact telephone hybrid. Management of 1 wired PSTN / POTS line, electronically balanced input and output on XLR connector Product Discription: BoxTel MKII is an analogue telephone hybrid, designed to interface a telephone line with audio equipments. BoxTel MKII manages 1 POTS/PSTN line, whereas BoxTel GSM manages […]
AXEL Compact telephone hybrid. Management of 1 wired PSTN / POTS line, electronically balanced input and output on XLR connector
Product Discription:
BoxTel MKII is an analogue telephone hybrid, designed to interface a telephone line with audio equipments. BoxTel MKII manages 1
POTS/PSTN line, whereas BoxTel GSM manages 1 GSM line to establish telephone connections where wired lines are not present.
A powerful internal microcontroller completely manages both BoxTel MKII and BoxTel GSM, allowing the configuration of the operating modes
via software. The internal microcontroller provides further functions such as adjustment of the line impedance according to the region,
visualization of the Send/Receive audio levels on the front leds, line detecting presence of a telephone line, buzzer with adjustable level,
AutoHook – automatic line hooking and answering after a certain number of rings. While BoxTel MKII is operative, its possible to exclude or
keep connected in parallel an external telephone set (Tel.Set).
The backlit Hook/Ring button on the front panel allows a quick management of the phone calls; each time a telephone call is incoming the
BoxTels Hook/Ring button starts to flash, by pressing it the operator answer the phone call. BoxTel MKII has the Line Detecting function,
which makes the Hook/Ring button switch on in presence of a telephone line.
BoxTel MKII and BoxTel GSM are devices equipped with an internal power supply enabling great audio performance: two separate
Send/Receive front potentiometers manage the audio level, with a total range of +/- 15dB. The input sensitivity is set at 0dBu while the
maximum output level is greater than +20 dBu.
The audio connections are separated for Send/Receive and are available over XLR electronically balanced connectors. A RJ11C connector
allows the telephone line connection (Tel.Line) and one more RJ11C connector performs the connection to an external telephone set (Tel.Set).
A GPIO port with optocouplers and open collector is provided to establish remote connections between BoxTel MKII and BoxTel GSM and
mixing console. It is possible to connect directly the Telco module of an Oxygen4, Oxygen5 and Oxygen7 console with BoxTel MKII/BoxTel GSM
by using a simlpe Pin-to-Pin cable. Internal universal power supply 90-264Vac/47-63Hz to operate worldwide.
Thanks to all of their features, BoxTel MKII and BoxTel GSM represent the telephone hybrids with the best quality/price ratio available on the
marketplace. BoxTel MKII and BoxTel GSM occupy ½ rack unit – LxHxD 22x5x13cm.
HIGHLIGHTS:
Compact telephone hybrid
1 POTS/PSTN or GSM DualBand telephone line
Send/Receive audio levels control and visualization
Backlit Hook/Ring button
Software configuration
Phone call auto-answer feature
International selection of the line impedance
Remote control
Potentiometer levels and front panel control
Analogue Send/Receive balanced over XLR
1 USB port
GPIO to remotely control Telco N-1 modules
Technical Facts:
Dimension LxHxD 22x5x13cm
AC Rate 230Vac / 110Vac 50 Hz / 60 Hz 30VA
Type of power supply Switching power supply, worldwide
Weight ≈ 2500 gr
Operating Temperature -5°C / +50°CANALOG INPUT MODULE (send)
Connectors: XLR, female – Electronically balanced
Operative Nominal Level: 0 dBu
Line Impedance 10 kΩ (Electronically balanced selectable) EMIsuppressed
Distortion: less than 0.01% TDH+NOISE (0.0dBu 1Khz)
Input Modes: MonoANALOG OUTPUT MODULE
(receive)
Connectors XLR, male – Electronically balanced
Output Level 0dBu +4dBu +6dBu Max +20dBu
Load Impendance 600 Ω
Distorsion Less than 0.01% TDH+NOISE (0.0dBu @ 1Khz)
Output Modes: MonoTELEPHONE MODULE PSTN / POTS
Connectors LINE RJ 11C 6/4 socket
Connectors SET RJ 11C 6/4 socket
Bandwidth telephone line 100Hz 5kHz, -3dB @ 1 kHz
Telephone line compliance ETSI TBR21, FCC Part68
Isolation 3 kVREMOTE INTERFACE
Digital Inputs GP In 2x GP In opto coupled. Only 1 is used as Hook
Digital Outputs GP Out 2x GP Out Open Collector opto isolated. Only GPOut 1 is used as RingTechnical Specification about BoxTel MKII GSM (Additional )
Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
New gate timing algorithms ensure the smoothest release characteristics
Program-adaptive expander/gates
Great sounding dynamics control for any type of program material
Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
Stereo or dual-mono operation
Balanced inputs and outputs on 1/4" TRS and XLR connectors
Side Chain insert
Classic dbx® "Auto" mode
Content
Manual
Axel Compact telephone hybrid BoxTel MKII
AXEL Compact telephone hybrid. Management of 1 wired PSTN / POTS line, electronically balanced input and output on XLR connector
Product Discription:
BoxTel MKII is an analogue telephone hybrid, designed to interface a telephone line with audio equipments. BoxTel MKII manages 1
POTS/PSTN line, whereas BoxTel GSM manages 1 GSM line to establish telephone connections where wired lines are not present.
A powerful internal microcontroller completely manages both BoxTel MKII and BoxTel GSM, allowing the configuration of the operating modes
via software. The internal microcontroller provides further functions such as adjustment of the line impedance according to the region,
visualization of the Send/Receive audio levels on the front leds, line detecting presence of a telephone line, buzzer with adjustable level,
AutoHook - automatic line hooking and answering after a certain number of rings. While BoxTel MKII is operative, its possible to exclude or
keep connected in parallel an external telephone set (Tel.Set).
The backlit Hook/Ring button on the front panel allows a quick management of the phone calls; each time a telephone call is incoming the
BoxTels Hook/Ring button starts to flash, by pressing it the operator answer the phone call. BoxTel MKII has the Line Detecting function,
which makes the Hook/Ring button switch on in presence of a telephone line.
BoxTel MKII and BoxTel GSM are devices equipped with an internal power supply enabling great audio performance: two separate
Send/Receive front potentiometers manage the audio level, with a total range of +/- 15dB. The input sensitivity is set at 0dBu while the
maximum output level is greater than +20 dBu.
The audio connections are separated for Send/Receive and are available over XLR electronically balanced connectors. A RJ11C connector
allows the telephone line connection (Tel.Line) and one more RJ11C connector performs the connection to an external telephone set (Tel.Set).
A GPIO port with optocouplers and open collector is provided to establish remote connections between BoxTel MKII and BoxTel GSM and
mixing console. It is possible to connect directly the Telco module of an Oxygen4, Oxygen5 and Oxygen7 console with BoxTel MKII/BoxTel GSM
by using a simlpe Pin-to-Pin cable. Internal universal power supply 90-264Vac/47-63Hz to operate worldwide.
Thanks to all of their features, BoxTel MKII and BoxTel GSM represent the telephone hybrids with the best quality/price ratio available on the
marketplace. BoxTel MKII and BoxTel GSM occupy ½ rack unit - LxHxD 22x5x13cm.
HIGHLIGHTS:
Compact telephone hybrid
1 POTS/PSTN or GSM DualBand telephone line
Send/Receive audio levels control and visualization
Backlit Hook/Ring button
Software configuration
Phone call auto-answer feature
International selection of the line impedance
Remote control
Potentiometer levels and front panel control
Analogue Send/Receive balanced over XLR
1 USB port
GPIO to remotely control Telco N-1 modules
Technical Facts:
Dimension LxHxD 22x5x13cm
AC Rate 230Vac / 110Vac 50 Hz / 60 Hz 30VA
Type of power supply Switching power supply, worldwide
Weight ≈ 2500 gr
Operating Temperature -5°C / +50°CANALOG INPUT MODULE (send)
Connectors: XLR, female - Electronically balanced
Operative Nominal Level: 0 dBu
Line Impedance 10 kΩ (Electronically balanced selectable) EMIsuppressed
Distortion: less than 0.01% TDH+NOISE (0.0dBu 1Khz)
Input Modes: MonoANALOG OUTPUT MODULE
(receive)
Connectors XLR, male - Electronically balanced
Output Level 0dBu +4dBu +6dBu Max +20dBu
Load Impendance 600 Ω
Distorsion Less than 0.01% TDH+NOISE (0.0dBu @ 1Khz)
Output Modes: MonoTELEPHONE MODULE PSTN / POTS
Connectors LINE RJ 11C 6/4 socket
Connectors SET RJ 11C 6/4 socket
Bandwidth telephone line 100Hz 5kHz, -3dB @ 1 kHz
Telephone line compliance ETSI TBR21, FCC Part68
Isolation 3 kVREMOTE INTERFACE
Digital Inputs GP In 2x GP In opto coupled. Only 1 is used as Hook
Digital Outputs GP Out 2x GP Out Open Collector opto isolated. Only GPOut 1 is used as RingTechnical Specification about BoxTel MKII GSM (Additional )
External Antenna 2.5 dBi omnidirectional with 1mt standard cable
External power supply unit Input: 100-240 Vac Output: 12 V 500 mA
External Antenna connector SMA
Total rechargeable battery time 6 h
PSTN / POTS connector RJ 11C 6/4 socket
Operating temperature 0°C ≈ +45°C
EN COMPLIANCY for GSM Modul EN 60950-1
EN 301 489-1/-7
EN 301 511
Compressos Expander Gate Kimiter DBX 166XS Stereo
Overview Bring a more professional sound to your mix
Adding a dbx® 166xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments. To protect your expensive amps and speakers the PeakStop® limiter provides an absolute ceiling for peak excursions or large transients that could damage your equipment.
dbx knows compressors...after all we invented them! The 166xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 166xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.
Specifications
Input Connectors
1/4" TRS, female XLR (pin 2 hot)
Input Impedance
>50kΩ balanced, >25kΩ unbalanced
Max Input
>+24dBu, Balanced or Unbalanced
Input Type
Electronically balanced/unbalanced, RF filtered
Sidechain
1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return)
Sidechain Impedance
Tip = >10kΩ (Input), Ring = 2kΩ (Output)
Sidechain Max Input Level
>+20dBu (tip/input); >+20dBu (ring/output)
Output Connectors
1/4" TRS, female XLR (pin 2 hot)
Output Impedance
120Ω balanced, >60Ω unbalanced
Max Output
+21dBu balanced/unbalanced into 2kΩ or greater; >+18 dBm balanced/unbalanced (into 600Ω)
Frequency Response
20Hz - 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain
Noise
Shure DP11EQE Dynamics Processor Specification:
GENERAL:
Frequency Response: 20 to 20k Hz +/- 1.0 dB re 1 kHz
Dynamic Range: 104 dB minimum, A-weighted, 20 Hz to 20 kHz
Sampling Rate: 48 kHz
Digital-to-Analog, Analog-to-Digital Conversion: 20 bit resolution
Voltage Gain:
1 dB +/- 1dB (power off)
12 dB +/- 2 dB (input 10 dBV, output +4 dBu)
12 dB +/- 2 dB (input +4 dBu, output 10 dBv)
0 dB +/- 2 dB (equal input and output sensitivities)
Impedance:
Input: 47 kilohms +/- 20% actual
Output: 120 ohms +/- 20% actual
Input Clipping Level
+18 dBu minimum (at +4 dBu setting)
+6 dBV minimum (at 10 dBV setting)
Output Clipping Level
+18 dBu minimum (at +4 dBu setting)
+6 dBV minimum (at 10 dBV setting)
Total Harmonic Distortion
LED Signal Indicators
Signal: 40 dB
Clip: 6 dB down from input clipping
Propagation Delay from Input to Ouput
0.8 ms (all filters flat, no dynamics processing, 0 ms delay), up to 2.1 ms (all processing enabled)
Polarity
Input to output: inverting optional (default: non-inverting)
XLR: pin 2 positive with respect to pin 3
1/4-inch TRS: tip positive with respect to ring
Operating Voltage
DP11EQ: 120 Vac, 50/60 Hz, 50 mA max
DP11EQE: 230 Vac, 50/60 Hz, 25 mA max
DP11EQJ: 100 Vac, 50/60 Hz, 50 mA max
Temperature Range
Operating: 0 degrees to 60 degrees C (32 degrees to 140 degrees F)
Fuse
DP11EQ: 120 Vac. Fuse: 100 mA, 250V time delay
DP11EQE: 230 Vac. Fuse: 50 mA, 250 V time delay
DP11EQJ: 100 Vac. Fuse: 100 mA, 250 V time delay
Dimensions
219 mm x 137 mm x 44 mm (8-5/8 in x 5-3/8 in x 1-3/4 in)
Weight: 930 g (2.05 lbs)
DYNAMICS PROCESSOR
Gate and Expander:
Threshold: 72 to 1 dB, 0.5 dB resolution
Attack: 1.0 to 200 ms
Decay: 0.05 to 1 second
Gate Hold Time: 0 to 0.5 seconds
AGC Leveler
Threshold: 72 to 1 dB, 0.5 dB resolution
Attack: 0.2 to 3 seconds
Decay: 0.5 to 5 seconds
Hinge: Threshold to 1 dB, 0.5 dB resolution
Compressor and Limiter
Threshold: 72 to 1 dB, 0.5 dB resolution
Attack: 1.0 to 200 ms
Decay: 0.05 to 1 second
Knee: Hard or Soft selectable
No Overshoot Peak Limiter
Propagation delay: 1 ms
Threshold: 72 to 1 dB, 0.5 dB resolution
Attack: 0 msDecay: 100 ms
PARAMETRIC EQUALIZER
Parametric Filter Frequency Bands
Up to 9 bands, variable frequency, variable Q
Boost/Cut Range
+6 dB to 18 dB per band
Q Range
1/40-octave to 2 octave
High and Low Shelf/Cut Filters
Shelf, +6 to 18 dB per filter
Cut, 12 dB per octave nominal
DELAY
Up to 1.3 seconds, 21 microsecond resolution
Product Features:
Ultra-high resolution 24-bit/96 kHz mastering processor featuring 32/40-bit floating-point DSP technology Audiophile 24-bit/96 kHz A/D- and D/A converters offering 113 dB dynamic range 4 concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer plus 3 Dynamic EQs per stereo channel) Ultra-high resolution 61-band real-time FFT analyzer with additional auto EQ function for room and loudspeaker equalization Unique VPQ (Virtual Paragraphic EQ) option allows parametric control of graphic EQs State-of-the-art compressor/expander with peak limiter per stereo channel, additional stereo imager and stereo delay for delay line applications Multi-functional level meters (peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA/Mic input) 64 user memories for complete setups and/or individual module configurations Separate mic/line input with phantom power for RTA and Auto-EQ applications Balanced inputs and servo-balanced outputs with gold-plated XLR connectors, stereo aux output, AES/EBU and S/PDIF inputs and outputs (XLR and optical) Professional Wordclock input and MIDI connections for full remote control, preset dumps and system updates Open architecture allowing future software updates via MIDI "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
AVALON VT-737SP FEATURES Vacuum tube triode signal path, transformer balanced microphone input, high-voltage circuits for maximum headroom to +30dB, low noise -92dB, internal discrete power supply with toroidal transformer, soft-start tube life extender, stereo link for compressors, all discrete Class A equalizer with musical passive filter design, sealed silver relays for signal routing, large control knobs with professional conductive plastic potentiometers, VU meter for output level monitoring and compressor gain reduction.
VT-737SP SPECIFICATIONS Circuit topology Four dual triode vacuum tubes (Sovtek 6922), high-voltage discrete Class A Gain Range Microphone: Transformer balanced 850/2500 ohm, 0dB to +58dB Instrument: Unbalanced 1 meg ohm, 0dB to+30dB Line: Balanced Class A 20k ohms, -27dB to 28dB Maximum input level and connector types Microphone26dB@25Hz, +30dB@1kHz balanced XLR Instrument+30dB unbalanced front panel jack socket Line +36dB balanced XLR Maximum output level +30dB balanced 600 ohms, DC coupled, discrete Class A Output type and gain XLR connector, output trim gain -45dB to20dB Noise 20kHz unweighted -92dB Noise microphone EIN -116dB, 22Hz to 22kHz unweighted Distortion THD, IMD 0.5% Frequency response -/2.5dB 10Hz to 120kHz input filter included Frequency response -3dB 1Hz to 200kHz line in-out VU meter and gain reduction High quality illuminated OVU =+4dB and gain reduction to -20dB High cut filter Variable 6dB per octave 30Hz to 140Hz Compressor type Optical passive attenuator incorporating twin vacuum tubes and stereo link Threshold - Ratio Threshold variable -30dB to +20dB, ratio-compression variable 1:1 to 20:1 Attack - Release Attack variable 2mS to 200mS, release variable 100mS to 5 seconds Equalizer type Discrete Class A, variable active and switched passive design Frequency bands (4) Treble - switched 10kHz, 15kHz, 20kHz, 32kHz, +/- 20dB range, shelf High mid - variable 200Hz to 2k8Hz and 2kHz to 28kHz, +/- 16dB range, hi-lo Q Low mid - variable 30Hz to 450Hz and 300Hz to 4k5Hz, +/- 16dB range, hi-lo Q Bass - switched 15Hz, 30Hz, 60Hz, 150Hz, +/- 24dB range, shelf AC power Internal toroidal 100v to 240v, 50-60Hz selectable, 75 watts maximum Dimensions 19 x 12 x 3.5 in (482 x 305 x 89mm) Weight 22lbs (10kg) Dimensions-shipping carton 21 x 18 x 8 in (533 x 457 x 203mm) Weight-packed 26lbs (11.8kg)
In today's recording and sound reinforcement environments, the need for multiple channels of high quality, easy to use compression is growing rapidly. The new dbx® 1046 is designed to provide the audio professional with just that: 4 channels of great sounding dbx compression for a variety of applications. Incorporating the industry standard dbx designs and the latest available manufacturing techniques, the dbx 1046 provides pristine sonic quality with that classic dbx sound.
The 1046 provides 4 channels of smooth classic dbx OverEasy® or Hard Knee compression that are perfectly suited for use on individual tracks of your multitrack recorder, and in virtually all applications the separate channels can be individually interfaced and used for entirely independent purposes. Additionally the newly developed PeakStopPlus™ is ideal for protecting your system from the oppressive peaks that can take out valuable drivers in your sound reinforcement rig or studio monitors.
All four channels have the following controls:
Threshold - allows you to set the level at which the compressor starts affecting the gain
OverEasy - allows you to select between soft compression for overall gain control or Hard Knee compression based on the characteristics of the original dbx 160.
Ratio - allows you to set the slope of gain reduction affecting the signal over the threshold level.
Input/Output Meter - allows you to set the meter to check the input and output levels for maximum signal-to-noise ratio and best level matching.
Output Gain - allows you to add make-up gain or to adjust the output level for that channel to match the next device's input gain.
Bypass - hard wire bypass allows you to hear how the compressor is affecting your signal.
PeakStopPlus - allows you to set the maximum signal level you want to pass through this channel. While it's virtually impossible to eliminate distortion, the PeakStopPlus circuit does it gracefully and effectively with minimal distortion.
Stereo Link - allows you to link channels 1&2 and 3&4 for two channels of true stereo compression.
All four channels feature balanced gold plated XLR and 1/4" inputs and outputs, and switchable +4dBu or -10dBV operating level to interface each individual channel with any other device.
So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx 1046 is for you.
Four independent channels of operation, stereo linkable in two pairs
PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
Independent Threshold and ratio controls
Switchable OverEasy® or Hard Knee compression
Classic dbx® compression
Differentially balanced gold-plated XLR and 1/4" inputs and outputs
True RMS level detection
Precision metering of input level, output level, and gain reduction
Dual True stereo or quad mono operation
Switchable +4dBu or -10dBV operation per channel
Input Connectors
XLR and 1/4" TRS (Pin 2 and tip hot)
Input Type
Electronically balanced/unbalanced, RF filtered
Input Impedance
Balanced > 40 kOhm, unbalanced >20 kOhm
Max Input
> +22 dBu balanced or unbalanced
CMRR
Typically >50 dB at 1 kHz
Output Connectors
XLR and 1/4" TRS (Pin 2 and tip hot)
Output Type
Servo-balanced/unbalanced, RF filtered
Output Impedance
Balanced 30 Ohm, unbalanced 15 Ohm
Max Output
> +22 dBm balanced, > +20 dBm unbalanced
Bandwidth
20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response
0.35 Hz to 90kHz, +0/-3 dB
Noise
Dynamic Range
> 118 dB, unweighted
THD+Noise
>0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain),
IMD
Interchannel Crosstalk
Stereo Coupling
True RMS Power Summing
Compressor Threshold Range
-40 dBu to +20 dBu
Compressor Ratio
1:1 to infinity:1
Compressor Threshold Characteristic
Selectable OverEasy® or hard knee
Compressor Attack/Release Characteristic
AutoDynamic™
Compressor Attack Time
Program-dependent
Compressor Release Time
Program-dependent
Compressor Output Gain
-20 to +20 dB
Limiter Threshold Range
0 dBu to +24 dBu (off)
Limiter Ratio
infinity:1
Limiter Type
PeakStopPlus® two-stage limiter
Limiter Stage 1
PeakStop® brickwall limiter
Limiter Stage 1 Attack Time
Zero
Limiter Stage 1 Release Time
Zero
Limiter Stage 2
Predictive intelligent program limiter
Limiter Stage 2 Attack Time
Program-dependent
Limiter Stage 2 Release Time
Program-dependent
OverEasy® Switch
Activates the OverEasy compression function
I/O Meter Switch
Switches between monitoring input and output levels on the Input/Output Level meter
Bypass Switch
Activates the direct input-to-output hard-wire bypass
Operating Level Switch
(rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels
ST Link Switch
Links channels in stereo pairs. Channels One and Three become the master channels
Gain Reduction Meter
8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
I/O Meter
8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
PeakStop™ Indicator
1 LED to indicate PeakStop™ limiting
Function Switches
LED indicator for each front-panel switch
Output Transformer Options
Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx
Operating Voltage
Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption
20 Watts
Fuse
100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
signal path. The output amplifier utilizes another dual triode vacuum tube driving a 
Reviews
There are no reviews yet.