KRK RP-8 G2 Powered reference studio monitor

Discontinued

207.68 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
PRICE PER UNIT ROKIT Powered Monitors feature several of the key design elements found in KRK?s premium models, many of which have become the ?studio standard? for the world?s finest engineers, producers and musicians. Now, you can have that same KRK sound, attention to detail and commitment at a price that makes Rokit Powered a […]

 

Read more

PRICE PER UNIT

ROKIT Powered Monitors feature several of the key design elements found
in KRK?s premium models, many of which have become the ?studio standard?
for the world?s finest engineers, producers and musicians. Now, you can have
that same KRK sound, attention to detail and commitment at a price that
makes Rokit Powered a truly uncommon value.
All KRK Rokit Powered Series monitors feature a proprietary signature yellow
woofer made of a woven glass aramid composite that delivers a tight low-end
response and a soft dome tweeter for natural sounding highs. The drivers are
electronically crossed over and are bi-amped for increased efficiency. All of this
is housed in an attractive cabinet with radiused corners that reduce edge diffraction
resulting in better audio imaging. The rear input panel features phone plug and XLR
connectors to accommodate any application.
 
Drivers:   Woofer: 8 ” Glass Aramid Composite Woofer
Tweeter: 1″ Neodymium Soft Dome Tweeter with Ferro Fluid
Input:   XLR (3-pin), RCA & 1/4″ TRS – 10k Ohm
Balanced / Unbalanced
Amplification:   90 Watt Dynamic Power Bi-amp
24 dB Octave Filters
Frequency Response:   45Hz – 20kHz
Video Shielding:   Yes
Dimensions:(H x W x D)   15″ x 10 7/16″ x 12“
39.4cm x 27.5cm x 29.8cm
Shipping Weight:   30 lbs (12 Kg)

Weight 25.00 kg

Reviews

There are no reviews yet.

Be the first to review “KRK RP-8 G2 Powered reference studio monitor”

Your email address will not be published. Required fields are marked *

Quick Comparison

KRK RP-8 G2 Powered reference studio monitor removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeADAM A8X Active Studio Monitor 150W removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeSAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR) remove
NameKRK RP-8 G2 Powered reference studio monitor removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeADAM A8X Active Studio Monitor 150W removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeSAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR) remove
Image
SKUH00KR00017E005760A8XCMS 50Solo6 BeGT
Rating
Price 207.68 incl. GR VAT 221.00 incl. GR VAT 1,045.00 incl. GR VAT 565.00 incl. GR VAT 995.00 incl. GR VAT 204.80 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

In stock

Available on backorder

In stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderIn stockAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

PRICE PER UNIT

ROKIT Powered Monitors feature several of the key design elements found
in KRK?s premium models, many of which have become the ?studio standard?
for the world?s finest engineers, producers and musicians. Now, you can have
that same KRK sound, attention to detail and commitment at a price that
makes Rokit Powered a truly uncommon value.
All KRK Rokit Powered Series monitors feature a proprietary signature yellow
woofer made of a woven glass aramid composite that delivers a tight low-end
response and a soft dome tweeter for natural sounding highs. The drivers are
electronically crossed over and are bi-amped for increased efficiency. All of this
is housed in an attractive cabinet with radiused corners that reduce edge diffraction
resulting in better audio imaging. The rear input panel features phone plug and XLR
connectors to accommodate any application.
 
Drivers:   Woofer: 8 " Glass Aramid Composite Woofer
Tweeter: 1" Neodymium Soft Dome Tweeter with Ferro Fluid
Input:   XLR (3-pin), RCA & 1/4" TRS - 10k Ohm
Balanced / Unbalanced
Amplification:   90 Watt Dynamic Power Bi-amp
24 dB Octave Filters
Frequency Response:   45Hz - 20kHz
Video Shielding:   Yes
Dimensions:(H x W x D)   15" x 10 7/16" x 12“
39.4cm x 27.5cm x 29.8cm
Shipping Weight:   30 lbs (12 Kg)

Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.

 

Specifications
Frequency response (+/-3dB) : 55Hz - 28kHz
Maximum SPL : 107dB SPL (peak @ 1m)

Input :

Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA

HF amplifier stage : 50W RMS, class AB
LF amplifier stage : 80W RMS, class AB

Electric supply :

Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord

Adjustment :

- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch

Indicators :

Power ON / OFF LED
Standby / ON LED
Audio Clip LED

Woofer : 5" Focal drive unit, Polyglass cone
Tweeter : Aluminum/Magnesium inverted dome Focal tweeter
Shielding : Integral by cancellation magnet
Construction : Reinforced and damped Aluminum cabinet

Finish :

Black powder cabinet

Dimensions with spikes : 289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“)
Dimensions with table stand : 299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“)
Net weight : 7.7kg - (17lb)

 

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 113dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Woofer : 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker
Tweeter : Focal TB871 Beryllium inverted dome tweeter
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 13 x 9-7/16 x 11-7/16 " (330x240x290mm)
Weight : 24.2lb (11kg)

 

    * Active studio monitors with USB audio interface
    * 4.25-inch magnetically shielded, inverted cone, copolymer woofer
    * 1-inch silk dome high frequency driver
    * 2 x 20 watts of internal stereo power
    * Two combination mic and instrument/line inputs
    * Two 1/8-inch stereo headphone outputs with level controls
    * Includes Cakewalk® Sonar LE music production software
    * Mic and instrument/line gain control with clip LED
    * 16-bit 44.1kHz/48kHz
    * Stereo RCA and 1/8-inch aux inputs
    * 2-position switch for no-latency direct stereo and mono monitoring
    * Mix control to balance computer and audio sources
    * USB and speaker cable included


Weight25.00 kg7.50 kg13.00 kg7.70 kg11.00 kg4.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 25.00 kg
Weight 7.50 kg
Weight 13.00 kg
Weight 7.70 kg
Weight 11.00 kg
Weight 4.30 kg