KRK RP-8 G2 Powered reference studio monitor

Discontinued

207.68 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
PRICE PER UNIT ROKIT Powered Monitors feature several of the key design elements found in KRK?s premium models, many of which have become the ?studio standard? for the world?s finest engineers, producers and musicians. Now, you can have that same KRK sound, attention to detail and commitment at a price that makes Rokit Powered a […]

 

Read more

PRICE PER UNIT

ROKIT Powered Monitors feature several of the key design elements found
in KRK?s premium models, many of which have become the ?studio standard?
for the world?s finest engineers, producers and musicians. Now, you can have
that same KRK sound, attention to detail and commitment at a price that
makes Rokit Powered a truly uncommon value.
All KRK Rokit Powered Series monitors feature a proprietary signature yellow
woofer made of a woven glass aramid composite that delivers a tight low-end
response and a soft dome tweeter for natural sounding highs. The drivers are
electronically crossed over and are bi-amped for increased efficiency. All of this
is housed in an attractive cabinet with radiused corners that reduce edge diffraction
resulting in better audio imaging. The rear input panel features phone plug and XLR
connectors to accommodate any application.
 
Drivers:   Woofer: 8 ” Glass Aramid Composite Woofer
Tweeter: 1″ Neodymium Soft Dome Tweeter with Ferro Fluid
Input:   XLR (3-pin), RCA & 1/4″ TRS – 10k Ohm
Balanced / Unbalanced
Amplification:   90 Watt Dynamic Power Bi-amp
24 dB Octave Filters
Frequency Response:   45Hz – 20kHz
Video Shielding:   Yes
Dimensions:(H x W x D)   15″ x 10 7/16″ x 12“
39.4cm x 27.5cm x 29.8cm
Shipping Weight:   30 lbs (12 Kg)

Weight 25.00 kg

Reviews

There are no reviews yet.

Be the first to review “KRK RP-8 G2 Powered reference studio monitor”

Your email address will not be published. Required fields are marked *

Quick Comparison

KRK RP-8 G2 Powered reference studio monitor removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeBEHRINGER MS20 24-Bit-192 kHz Digital 20-Watt Stereo Near Field Monitors pair removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeBEHRINGER B1030A Active studio monito -Unit- remove
NameKRK RP-8 G2 Powered reference studio monitor removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeBEHRINGER MS20 24-Bit-192 kHz Digital 20-Watt Stereo Near Field Monitors pair removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeBEHRINGER B1030A Active studio monito -Unit- remove
Image
SKUH00KR00017Solo6 BeTwin6 BeE0053208130AE005223
Rating
Price 207.68 incl. GR VAT 995.00 incl. GR VAT1,675.00 incl. GR VAT 119.00 incl. GR VAT 725.51 incl. GR VAT 164.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

PRICE PER UNIT

ROKIT Powered Monitors feature several of the key design elements found
in KRK?s premium models, many of which have become the ?studio standard?
for the world?s finest engineers, producers and musicians. Now, you can have
that same KRK sound, attention to detail and commitment at a price that
makes Rokit Powered a truly uncommon value.
All KRK Rokit Powered Series monitors feature a proprietary signature yellow
woofer made of a woven glass aramid composite that delivers a tight low-end
response and a soft dome tweeter for natural sounding highs. The drivers are
electronically crossed over and are bi-amped for increased efficiency. All of this
is housed in an attractive cabinet with radiused corners that reduce edge diffraction
resulting in better audio imaging. The rear input panel features phone plug and XLR
connectors to accommodate any application.
 
Drivers:   Woofer: 8 " Glass Aramid Composite Woofer
Tweeter: 1" Neodymium Soft Dome Tweeter with Ferro Fluid
Input:   XLR (3-pin), RCA & 1/4" TRS - 10k Ohm
Balanced / Unbalanced
Amplification:   90 Watt Dynamic Power Bi-amp
24 dB Octave Filters
Frequency Response:   45Hz - 20kHz
Video Shielding:   Yes
Dimensions:(H x W x D)   15" x 10 7/16" x 12“
39.4cm x 27.5cm x 29.8cm
Shipping Weight:   30 lbs (12 Kg)

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 113dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Woofer : 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker
Tweeter : Focal TB871 Beryllium inverted dome tweeter
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 13 x 9-7/16 x 11-7/16 " (330x240x290mm)
Weight : 24.2lb (11kg)

 

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 115dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 2x150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Visualization and control :

Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Woofer : 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker
Tweeter : TB871, Focal inverted dome tweeter in Beryllium
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight : 30.8lb (14kg)

 

Behringer MS-20 24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors

OVERVIEW

The MS20 Studio Monitors from Behringer are a pair of extremely compact, 2 x 10-Watt nearfield monitors that feature high-resolution 24-bit/192 kHz D/A converters. With the MS20, you can connect directly to your digital signal sources and eliminate annoying analog line-loss and hum forever. Whether you connect to your computer sound card, keyboard, or MP3 player, you will enjoy exceptional sound quality with great dynamics. The built-in amplifiers provide lots of headroom, while the powerful woofers and tweeters provide ultra-linear frequency response.

The MS20 connectivity includes stereo 1/8" and RCA jacks, which can be used simultaneously or mixed with a digital stereo source. Digital duties are handled by either RCA or TOSLINK sockets, providing for ultra-simple hookup. Individual volume controls for both Line inputs plus Bass and Treble EQ controls are provided on the front panel, along with a 1/4" headphone jack that automatically mutes the internal speakers.

Sound Quality
Sporting 3.625" woofers and 2.5" high-resolution tweeters, MS20 monitor speakers bring quality audio within the reach of anyone that operates a computer workstation. Whether you're a musician tracking your latest masterpieces, or just someone who listens to your favorite songs at work, MS20 loudspeakers will make them sound significantly better. They also make excellent add-on speakers for electronic keyboards. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.

Built-in Mixer
The MS20 takes audio to an even higher level with its multiple input options. The built-in mixer features 1/8" stereo inputs for connecting CD/MD/MP3 players, dual RCA jacks for tape decks and stereo keyboard modules, and even both RCA and TOSLINK connectors for digital signal sources. This adds up to a system that lets you play along with a variety of prerecorded tracks. And you can wail away to your heart's content in total privacy, thanks to MS20's powerful headphone jack.

 FEATURES

  • 2-Way active studio monitor pair
  • Ideally suited for computer studios, multimedia workstations and keyboards
  • Built-in 2 x 10-Watt powerful amplifiers with lots of headroom
  • Powerful woofers and high-resolution tweeters
  • High-resolution 24-bit/192 kHz D/A converters for extended dynamic range
  • Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
  • Two stereo analog inputs featuring 1/4'' TRS and stereo RCA connectors
  • Individual volume controls for both Line inputs plus Bass and Treble EQ controls
  • 1/4'' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel

SPECIFICATIONS

MS20 Digital Monitor Speakers (Pair)

  • Loudspeakers
    Tweeter: ˜ 65 mm (2 1/2“), 8 ?
    Woofer: ˜ 92 mm (3 5/8“), 4 ?
    Audio Inputs
    Line 1: 1/8" TRS stereo, impedance 20 k?
    Line 2: 2 RCA, impedance 20 k?
    Digital Inputs
    Optical: TOSLINK
    Coaxial: RCA
    Converter: 24-bit
    Sample rate: System Specs
    Output power: 2 x 20W
    Frequency response: 50Hz to 25kHz
    Power Supply
    Mains Voltages: USA/Canada 120 V, 60 Hz
    Power Consumption: 80W
   

The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.

Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type 
Input Sampling rate
No de-emphasis  29 - 200 kHz
Input Sampling rate
Using de-emphasis 
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches 
Speaker weight 5.6 kg (12.3 lb)

High-Resolution, Active 2-Way Reference Studio Monitor with 5.25" Kevlar Woofer

  • Ultra-linear studio monitor with true active design
  • Precision Class A/B amplifiers with active protection circuits: 50 W for LF / 25 W for HF
  • Ultra-high resolution, ferrofluid-cooled 1" dome tweeter for ultimate sound reproduction
  • Long-throw 5.25" woofer with deformation-resistant Kevlar cone for ultimate bass response
  • Ultimate dispersion characteristics and extremely large "sweet spot" owing to advanced wave guide technology
  • High-precision crossover network with 4th order Linkwitz-Riley filters
  • Adjustable to a wide range of acoustic conditions
  • Separately controlled limiter for low and high frequency overload protection
  • Magnetic shielding allows placement near computer monitors
  • “Planet Earth" power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
  • Servo-balanced inputs with XLR, 1/4" and unbalanced RCA connectors
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
Weight25.00 kg11.00 kg14.00 kg6.00 kg8.60 kg7.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 25.00 kg
Weight 11.00 kg
Weight 14.00 kg
Weight 6.00 kg
Weight 8.60 kg
Weight 7.00 kg