| Content | The MINIFBQ FBQ800 features Behringer's FBQ Feedback Detection System that instantly reveals critical frequencies and can also be used as an audio analyzer. An additional low cut filter removes unwanted frequencies such as floor rumble. Accurate 6-digit LED input/output meters and level control are provided for precise level indication. Long-term reliability is guaranteed with Behringer's high-quality illuminated faders, potentiometer and illuminated switches. The ultralow noise audio operational amplifiers offer outstanding sound performance. In addition, all Mini Series models can be stacked on top of each other to create an ultra-compact signal processing solution.
How Does it Work?
Imagine the frequency range of the sound you hear as a highway, a very wide one with nine lanes. Each of these "lanes” represents a single octave of the sonic spectrum. The first four lanes, labeled 63 - 500 (Hz) contain the really low frequency sound content, mainly bass, bass vocals, and the kick and tom drums. The three lanes labeled 1k, 2k and 4k (Hz), make up the fundamental zone of most musical instruments and the male and female vocals. 8k and 16k cover the frequency range of cymbals, snare drums and higher pitched percussion instruments. The FBQ800 allows you to control the flow of audio traffic in each of these nine lanes. When properly applied, EQ makes it possible to hear all of these frequency ranges equally, thus the term equalization.
Feedback Elimination
When a specific frequency, or range of frequencies, reaches too high a level, feedback occurs—that all-too-familiar squeal or howl you get when the mic is too close to the speaker. Basically, feedback happens when there is so much of a particular frequency that it is picked up by the mic and run through the system again. Thatʼs why feedback typically gets louder and louder the longer itʼs allowed to occur. Needless to say, this kind of feedback is very undesirable.
This is where the FBQ800ʼs Feedback Detection System really works its magic. In this ingenious circuitry, LEDs on the individual faders light up when that frequency band is approaching the danger zone. All you need do is lower the illuminated slider until the LED blinks out—voilà, feedback problem solved! What once required a highly trained ear is now an activity that even a child can master.
Sonic Toolkit…
That really is the best way to describe the FBQ800. With its nine frequency bands, you easily fine-tune your sound and instantly eliminate feedback. And each fader can be used to boost or cut the frequency range it controls by as much as 12 dB (and thatʼs a lot!).
Special attention is paid to the low frequency zone. In addition to low frequency faders, the FBQ800 features a Low Cut filter for removing unwanted low frequencies such as floor rumble, room resonance, electrical hum, etc. This is especially handy if your system is being used for speech rather than music.
To Boost or to Cut, That is the Question
Raising and lowering specific frequency bands can improve the frequency response of any roomʼs acoustics. For instance, if the room youʼre in is "bass-heavy,” lowering the 63 and 125Hz faders can help eliminate an overall "boomy” or "muddy” sound. Likewise, gently boosting the 8 and 16k sliders can add sparkle to a somewhat "dark” mix. Are the vocals getting lost in the mix? Raising the level of the 1k slider can help bring them out.
Itʼs important to note that raising a single fader level is not always the best solution; itʼs often better to lower the bands surrounding the frequency you want to bring out, and then boost the overall volume level to achieve better headroom.
Built for Accuracy and Reliability
Speaking of headroom, FBQ800ʼs 6-digit LED I/O meters and level control are provided for precise level maintenance. Long-term reliability is ensured, thanks to high-quality illuminated faders and switches, and our ultra low-noise audio operational amplifiers provide outstanding sonic performance. In addition, all Mini Series components can be stacked to create an ultra-compact signal processing solution.
Mini Series mixer with built-in feedback detection.
FEATURES
- Ultra-compact 9.5" graphic equalizer for studio and stage applications
- FBQ Feedback Detection system instantly reveals critical frequencies
- Additional Low-cut filter removes unwanted frequencies, like floor rumble
- 6-segment LED input/output meters and Level control for precise level indication
- High-quality illuminated faders, potentiometers and illuminated switches
- Low noise audio operational amplifiers offer excellent sound performance
SPECIFICATIONS
MINIFBQ FBQ800 9-Band Graphic Equalizer with FBQ
- INPUT
- Type 1/4" TRS connectors (balanced) or
- RCA connectors (unbalanced)
- Impedance approx. 20k ohms, balanced
- approx. 10k ohms, unbalanced
- CMRR 40 dB typ. @ 1 kHz
- Max. input level +15 dBu
- OUTPUT
- Type 1/4" TS connectors (unbalanced) or
- RCA connectors (unbalanced)
- Impedance approx. 120 ohms
- Max. output level +15 dBu
- SYSTEM SPECIFICATIONS
- Frequency response 10 Hz to 200 kHz, -3 dB
- Dynamic range 110 dB, 10 Hz to 22 kHz
- Distortion 0.003 % typ. @ 0 dBu
- Crosstalk
- Signal-to-noise ratio 10 Hz - 22 kHz
- GRAPHIC EQUALIZER
- Type 9 analog stereo bands
- Control range ±6 dB or ±12 dB, switchable
- Bandwidth 1 oct.
- OTHER FEATURES
- Low-cut filter 75 Hz (12 dB/oct.)
- Input level control -12 dB to +12 dB
- POWER SUPPLY
- Mains connection external power supply
- 9 V ~ / 750 mA
- Mains voltage
- DIMENSIONS/WEIGHT
- Dimensions (H x W x D) approx. 1 8/9" (48 mm) x 9 5/9" (243 mm) x 4 5/7" (120 mm)
- Weight approx. 0.86 lbs. ( 0.39 kg)
|
Phonic's GEQ3102F is the authentic soundman's choice of EQ - a dual channel 31-band equalizer, offering 6 or 12 dB of cut or boost on standard ISO center frequencies between 20 Hz and 20 KHz. The GEQ3102F is 2-rack space units high and accepts both 1/4" TRS phone jacks and XLR connectors, making it ideal for any studio or live venue setup.
- Sweepable high and low cut filters on each channel to remove unwanted frequencies
- Ultra low-noise audio operational amplifiers offer outstanding sound performance
- Relay-controlled hard-bypass with an auto-bypass function during power failure
- Dedicated subwoofer output with user-adjustable low-pass filter
- Feedback detection circuitry for indicating critical frequencies
- Balanced inputs and outputs with 1/4" TRS and XLR connectors
|
iEQ-15 Dual 15-Band Graphic EQ with Type V? NR and AFS?
With an EQ heritage that has produced countless industry standard
patents and dates back more than 30 years, the dbx iEQ-31 easily
lives up to the dbx legacy of uncompromised sonic integrity. In
addition to unsurpassed equalization specs, the iEQ-15 also offers
the built-in necessities which include AFS? feedback Suppression,
Type V? noise reduction and PeakStopPlus? limiting. Besides
including two 15-band channels of 2/3-octave equalization, the iEQ-15
also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut
range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs,
nonconductive nylon sliders; and an intuitive user interface with comprehensive
output and gain reduction metering. As always, the inevitable result of our
meticulous attention to detail and top-quality componentry is exceptional
sound, performance, and reliability.
The iEQ series represents a major step forward in the performance of EQs.
The iEQ series is now able to offer state-of-the-art digital EQ performance
and specs with an analog look and feel. From its amazing 10Hz to 22kHz
frequency response, to its 113dB dynamic range and Advanced Feedback
Suppression (AFS?), dbx proprietary Type V? noise reduction
and PeakStopPlus? limiting, the iEQ-15 offers out of this world specifications
with a downto- earth price point. Sure to find a home in the studio, on tour and
with installed sound venues, the iEQ-15 is destined to take its rightful place in
the lineage of great dbx? signal processors that are the professional?s choice
in signal processing. With such pristine design and quality, the iEQ-15 offers
the maximum sonic flexibility in a straight forward interface and rock-solid construction.
? Advanced Feedback Suppression (AFS?)
? Type V? Noise Reduction
? PeakStopPlus? Limiting
? 2/3-octave Constant Q frequency bands
? Switchable boost/cut ranges of ±6 or ±15dB
? 18 dB per octave 40Hz low-cut filter
? ±12dB input gain range
? XLR, TRS and Euroblock Inputs and Outputs
? Internal Toroidal Transformer
? Frequency Response of 10Hz to 22kHz
? Dynamic range of greater than 113dB
? User Power Up Features
? Relay Bypass for Power Failure System Protection
|
- Audiophile 31-band stereo graphic equalizer for live and studio applications
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
- Ultra-low noise 4580 operational amplifiers for highest signal integrity
- Dedicated Limiters with gain reduction meters for each channel protect your sound system from overload and distortion
- Pink noise generator provides test signals to adapt your sound system to any room acoustics
- Mono subwoofer output with dedicated level control and adjustable crossover frequency
- Additional sweepable high and low-cut filters for each channel remove unwanted frequencies e.g. floor rumble, hiss etc.
- Highly accurate 8-segment LED input/output metering and input gain controls for easy level setting
- Relay-controlled hard bypass with an auto-bypass function during power failure (fail-safe relay)
- Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
- “Planet Earth" switching power supply for maximum flexibility (100
- 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
|
1215 Dual 15-Band Graphic Equalizer
The dbx 12 Series were designed to meet the needs of the most
demanding sound reinforcement environments, while offering the
simplicity of straightforward controls. The 1215 provides standard
features like dual channels, 15 2/3 octave bands, ISO frequency
centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per
octave low-cut filters, but also includes other thoughtful features.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut
range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS
connectors for installation ease; balanced inputs and outputs for quiet
operation; and chassis/signal ground lift capabilities for quick hum isolation.
The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years
of maintenance-free operation in any application. The magnetically isolated
transformer, electronically balanced/unbalanced inputs and servo balanced/
unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire
relay bypass with 2 second power up delay were steps our engineers took
to ensure compatibility for all installations. Only the best components were
utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR
(ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel
crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail
is contained in a 2U steel/aluminum chassis.
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced inputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
| PRICE WITHOUT V.A.T.
BSS Opal FCS-966 Constant Q Graphic Eq
Graphic equalisers are found in just about every sound application, from room contouring to feedback control and general audio sweetening.
Traditionally, much general eq'ing takes place on the faders alone, but this restricts the use of the faders at each end of the scale for further precision eq work. So we provided the Opal FCS-966 with separate LF and HF contour filters which can change an overall sound balance without disturbing a detailed room or loudspeaker response.
These filters are very musical gentle boost and cut shelving filters which can be used to add (or remove) room effects that change with temperature, audience numbers or humidity.
All these effects can be easily made without disturbing the critical fader settings already made.
Constant Q Filters
The modern generation of graphic eq's
uses the Constant Q topology, pioneered by BSS Audio, which means that the filter width is constant whatever the fader gain setting.
Compared to the earlier 'gyrator' style of filters, Constant Q filters provide a smoother and more predictable interaction between adjacent faders and the resulting eq curve more closely resembles the actual fader positions.
More Gain Control Per Filter
Each eq fader has +/-15dB of adjustable gain, more than many competitive graphic eq's. The faders are long-throw 45mm types for precision control.
High Pass Filter
Also provided on the FCS-966 is a sweepable high-pass filter which can be used very effectively to restrict the low-energy output for better amplifier and loudspeaker performance. Stage monitors also benefit from the application of a high-pass filter to remove bass signals e.g. from vocal-only wedges.
Metering
BSS Audio believes in providing engineers with information, and the FCS-966's 8-segment led meter shows output level and warns of signal clipping within the eq. When the unit is switched to bypass, the meter will read the input level, allowing accurate matching of the 'dry' and equalised signals using the gain control.
Centre Bypass
When any eq fader is in its centre detent position, the filter is automatically bypassed, for optimum performance.
Input/Outputs
All the inputs and outputs of the FCS-966 are electronically balanced, with optional transformer balancing. To make installation of the FCS-966 easier, we've provided three differerent interface connectors: XLR-type, 1/4" TRS jack and Phoenix/Combicon screw terminals.
Relay Bypass
The EQ IN buttons switch the EQ path
into circuit. When switched out, or power fails, a high-quality relay switches the input signal directly to the output connectors.
Control Descriptions
Faders
30 EQ filter faders on ISO centres, each with nominal +/-15dB of gain. Positive centre-detent on 45mm long-throw precision faders.
HP Filter
Sweepable high pass filter, frequency adjustable from OUT (flat) up to 250Hz.
LF Contour
Smooth shelving filter, +/-6dB of gain at 50Hz
HF Contour
Smooth shelving filter, +/-6dB of gain at 14kHz.
GAIN
Used for overall unity gain adjustment. Adjustable from - infinity to +10dB.
CLIP
Triple-point clip detector that indicates red when the internal signal is clipping at any one of three critical points.
LED Meter
Shows output signal level (input signal when eq is bypassed) from -24dBu to +18dBu in 8 steps. |
Reviews
There are no reviews yet.