Content |
- 2-way active studio monitors ideally suited for computer studios, audio and multimedia workstations and keyboard monitoring
- Built-in powerful 2 x 20-Watt amplifiers with immense headroom
- Powerful woofers and high-resolution tweeters provide an ultra-linear frequency response
- Ultra-high resolution 24-bit/192 kHz D/A converters for an incredible dynamic range
- Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
- Two stereo analog inputs featuring ⅛\' TRS and stereo RCA connectors can be used simultaneously or mixed with a digital stereo source
- Individual Volume controls for both Line inputs plus Bass and Treble EQ controls
- ¼\' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel
- Magnetically shielded for placement near computer monitors
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
|
The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.
Specifications Frequency response : | 40Hz - 40kHz | Maximum SPL : | 115dB SPL (peak @ 1m) |
Input :
|
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
| Bass/mid-range : | 2x150W rms, BASH® technology | Treble : | 100W rms, AB class |
Electric supply :
|
Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire
|
Visualization and control :
|
Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector
| warning light : | Power on LED |
Electric supply :
|
Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire
| Woofer : | 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker | Tweeter : | TB871, Focal inverted dome tweeter in Beryllium | transducer shielding : | Integral through cancellation magnets or by magnet design | Box : | 7-1/2" (19mm) MDF panels |
Finish :
|
Dark red natural veneering side panels, black body
| Dimensions (HxWxD) : | 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm) | Weight : | 30.8lb (14kg) |
|
Features
Professional 2-way active DJ monitors
Output: 2x 30 W RMS
Frequency response: 35 Hz - 20 kHz
S/N Ratio: > 75 dB
Impedance: 8 ohm
Magnetically shielded bass drivers
Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter
Technical Data
Dimensions: 232 x 320 x 180 mm
Weight: 5.0 kg (per piece)
|
The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.
Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type
Input Sampling rate
No de-emphasis 29 - 200 kHz
Input Sampling rate
Using de-emphasis
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches
Speaker weight 5.6 kg (12.3 lb)
| M-Audio BX8 D3 Features:
- 150W active studio monitor with 8" military-grade Kevlar low-frequency driver and 1.25" silk dome tweeter
- Bi-amplified design delivers a sound that's both powerful and precise
- Custom waveguide ensures accurate dispersion for an incredibly tight soundstage
- Optimized rear-mounted port produces defined low-end response with bass extension down to 37Hz
- Acoustic Space Control tailors your monitor to your mix space
- Volume control for dialing in the perfect playback level
- Balanced combo input allows for flexible installation
- Front-panel LED shines brightly when the speaker is positioned at an ideal angle
M Audio BX8 D3 8 Inch Powered Studio Monitor Specifications
- Frequency Range: 37Hz – 22kHz
- Crossover: 2.0kHz
- Maximum Peak Input Level: -2dBU
- Input Types: Balanced 20kO XLR, and TRS
- Unbalanced: 10kO TS
- Input Sensitivity: -12dBU
- HF Driver Size: 31.8 mm (1.25“)
- LF Driver Size: 203 mm (8“)
- Amplifier Power: 150W Class A/B
- HF Driver Power Amp: 70W
- LF Driver Power Amp: 80W
- Port: Rear internally flared
- Controls: Yes
- Magnetic Shielding: Yes
- AC Input Voltage: 100–120V, 50/60 Hz 220–240V, 50/60 Hz
- Enclosure Construction: MDF
- Enclosure Finish: Black PVC
- Baffle Construction: Injection-molded ABS
- Baffle Finish: Matte black with Soft-touch
- Dimensions (HxWxD): 384 mm x 250mm x 302mm (15.1” x 9.8” x 11.9”)
- Weight: 10.5 kgs (23.1 lbs)
- Display Carton (HxWxD): 398mm x 345mm x 482mm (15.6” x 13.5” x 18.9”)
- Shipping Carton (HxWxD): 412mm x 359mm x 502mm (16.2” x 14” x 19.68”)
- Shipping Weight: 12.8kgs (28.22lbs)
- Configuration: 2-Way bi-amp
- System Type: Active Monitor
- Fuse Rating: 220–240V~ T1AL, 250V 100–120V~ T2AL, 250V
- Power Consumption: 150W
- Shape: Bass-reflex
|
The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.
Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
|
Reviews
There are no reviews yet.