BSS BLU10 Programmable Touchscreen Controller White

The original Soundweb 9010 Programmable Controller set new standards in control interfacing to DSP systems, and has yet to be bettered as a simple yet powerful interface.

The Soundweb London equivalent, the BLU-10, builds on that power and reputation by adding touch-screen control to make a more attractive and potentially cost-saving control solution. It is possible that a BLU-10 could replace a more expensive proprietary touch screen solution where simpler control interfacing is required.

As with the Soundweb 9010, up to 100 control ʽpagesʼ of virtually any Soundweb London DSP parameter can be constructed, with the ability to create ʽfoldersʼ for nested pages. Access to specific pages or folders can be restricted with the used of password protection, so that only engineers or key employees can adjust critical system parameters.

Each page can hold up to eight different functions and with navigation being carried out entirely by a page list, all of these functions can be assigned to real parameters rather than functioning as page transitions.

Programming the BLU-10

Soundweb users will be familiar with the simple drag-and-drop programming interface, and the BLU-10 interface is very similar. Once the menu pages have been created, operation of the pages can be tested using the special simulation mode, which emulates how the controller will work when in use. This allows menu structures to be checked before the system goes live.

The BLU-10 connects into a Soundweb London network via its Ethernet port, either directly into the rear of a rackmount device such as the BLU-16 with a Cat 5 crossover cable or with a standard Cat 5 cable into an Ethernet switch. The unit is powered either using the terminals on the rear, accepting a range of 12V - 48V DC or with IEEE802.3af Power Over Ethernet (POE).

Mechanical Installation

The BLU-10 mounts in a standard US 3-gang wallbox (available from BSS Audio) using the screws provided with the unit.

The Soundweb London BLU-101 offers a fixed configuration of 12 analog inputs and 8 analog outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.

The BLU-101 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.

The BLU-101 contains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.

Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.

This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

The BLU-101 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.

Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.

Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-101 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.

The BLU-101 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Key Features:
• 12 Analog Inputs (with 48v Phantom Power per Channel)
• 8 Analog Outputs
• Configurable Signal Processing
• 12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
• Rich Palette of Processing and Logic Objects
• 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• Clear Front Panel LED Indication
• Bi-Directional Locate Functionality
• 12 Control Inputs and 6 Logic Outputs for GPIO Integration
• Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet London Architect

Κάρτα τεσσάρων εξόδων line για τα BLU-80, BLU-32, BLU-16. 

Product Features:

16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality
8 analog, servo-balanced XLR outputs
AES50 network ports featuring KLARK TEKNIKʼs SuperMAC networking capability for ultra-low jitter and latency
Up to 100 m networking capability via CAT-5e cable (not included)
Dual AES50 ports for cascading S16 units—no merger or router required
Precise LED metering plus 7-segment displays for signal control on stage
Phones output assignable to any of the inputs/outputs for on-stage monitoring
Connectivity for BEHRINGER's P-16 Personal Monitoring System for In-Ear applications (not included)
Dual ADAT outputs for use in splitter mode and stand-alone digital multicore applications
MIDI In/Out for bi-directional communication between FOH console and on-stage MIDI devices
USB connector for system updates via PC
"Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
"Built like a tank" yet compact, all-steel 2U rack-mount chassis
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

KLARK TEKNIK AES50

KLARK TEKNIK SuperMAC (AES50-Compliant) technology gives the S16 its high-capacity digital interconnectivity with ultra-low latency operation, as well as superbly simple deployment and ease of use. KLARK TEKNIK engineers worked hand-in-hand with BEHRINGER product developers to ensure the S16 meets, or exceeds, the requirements of live performance entertainers and their professional audio engineers. Some of the outstanding features are:
48 bidirectional audio channels over CAT5 cable (48 kHz)
24 bidirectional audio channels over CAT5 cable (96 kHz)
Single cable duplex interconnection for audio and sample clocks
Ethernet physical layer audio data transmission
High channel count and ultra-low deterministic latency
Accurate phase-aligned clock distribution.
Comprehensive error detection
and management
Provision for redundant networking
Minimal configuration ñ total ease of deployment and use
Ethernet TCP/IP protocol-compatible auxiliary data channel
Royalty-free implementations available as Xilinx FPGA cores
OEM modules available from developer partners

User's Manual

For decades, dbx’s patented Subharmonic Synthesis has rattled foundations enhancing the bass in a variety of professional applications including nightclub and DJ mixing, theatre and film sound, music recording, live music performance and broadcasting. dbx’s Subharmonic Synthesis process actually produces a new, Waveform Modeled bass note, exactly an octave below the bass in the original audio.

The dbx 510 answers the call of audio professionals everywhere delivering Subharmonic Synthesis in the convenient design of a 500 Series module. The 510’s two separate bands of subharmonic synthesis provide the best combination of smoothness and control, while the independent Low Frequency Boost circuit is designed to get the most out of high-performance, low frequency speaker systems. Unlike other attempts at bass synthesis, the dbx process produces musical low frequencies that don’t interfere with mid and high-band information, even when the maximum synthesis and boost are applied. The result is a low-end punch that people really feel!

Put some boom in your room with the dbx 510!

Overview Dial in YOUR mix exactly as YOU want it, in Real Time.

The PMC16 is a 16 channel personal monitor controller which allows the user to create a custom mix from 16 channels of audio. Designed to be used with the dbx TR1616 or any other BLU link compatible device, the PMC16 allows for monitoring with headphones, in-ear monitors, powered monitors, or traditional wedge monitors. Multiple PMC16s can be daisy chained using CAT5e cable allowing each user to receive 16 channels of high-resolution digital audio and create their own personalized mix to suit their monitoring needs. The PMC16 comprises a 16 channel mixer section with full control of levels, panning, effect send levels, muting, and soloing. Onboard Lexicon© reverb provides the finishing touch. The PMC16ʼs output processing section includes: stereo width control, wedge monitor compensation EQ, high and low master EQ, master level control, and dbx limiting. With a Setup Wizard for ease of configuration, full 16 channel level metering, channel grouping, 16 preset locations for future recall of configurations and mixes, and an intuitive yet powerful user interface, PMC16 gives you the power to dial in YOUR mix exactly as YOU want it, in real time.

Recommended for: Portable, Tour.

• 16 Channel Monitor Mixer with Level, Pan, Mute, Solo, & Reverb Send Control
• 16 Preset Locations for Mix & Configuration Recall
• LCD Display with 16 Channel Metering
• Built-In Lexicon© Reverb
• dbx PeakStopPlus™ Limiting
• Global High & Low EQ
• Global Master Level Control
• Global Stereo Width Control
• BLU Link High Bandwidth, Fault Tolerant Digital Audio Bus
• XLR & 1/4” Stereo or Mono Outputs
• 1/8” & 1/4” Headphone Outputs
• Setup Wizard for Easy Configuration
• Supports 48 kHz & 96 kHz Sampling Rates
• Channel Linking, Grouping, & Multi-Select Capabilities
• Supports up to 60 PMC16s on a Single BLU Link Ring
• Built-In Sturdy Mic Stand Mount
• USB Port for Firmware Updates