Content | |
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | Bass reflex type | Rated Input | 30W (high impedance) | Power Handling Capacity | Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program:120W(8Ω), 60W(16Ω) | Impedance | (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W) | Impedance | (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W) | Impedance | (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W) | Low | (Adjustable) 16Ω, 8Ω | Sound Pressure Leve | 90dB (1W, 1m) | Frequency Response | 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component: High frequency | 12cm cone-type | Speaker Component: Low frequency | 12cm cone-type | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | Finish | Enclosure: Steel plate, plating
Baffle: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net: Steel plate, white, paint | Dust-proof bag | n/a | Dimensions | ø230 x 229 (D)mm | Weight | 3.7kg (including mounting accessories) | Accessories Panel | 1 | Ceiling reinforcement ring | 1 | Safety wire | 1 | Paper pattern | 1 | Option Anchor hanging bracket | HY- AH1 | Back can | HY- BC1 | Tile bar bridge | HY- TB1 | Trim ring | HY- TR1 | Electronic controller | AC- 120C | Note | The F-122C must be used with an Electronic Controller AC-120. |
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | Bass reflex type | Rated Input | 30W (high impedance) | Power Handling Capacity | Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program:120W(8Ω), 60W(16Ω) | Impedance | (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W) | Impedance | (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W) | Impedance | (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W) | Low (Adjustable | 16Ω, 8Ω | Sound Pressure Level | 91dB (1W, 1m) | Frequency Response | 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component | High frequency: Balanced dome- type | Speaker Component | Low frequency: 12cm cone-type | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | Finish Enclosure | Steel plate, plating | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | Punched net | Steel plate, white, paint | Dust-proof bag | n/a | Dimensions | ø230 x 229 (D)mm | Weight | 3.7kg (including mounting accessories) | Accessories Panel | 1 | Ceiling reinforcement ring | 1 | Safety wire | 1 | Paper pattern | 1 | Option Anchor hanging bracket | HY- AH1 | Back can | HY- BC1 | Tile bar bridge | HY- TB1 | Trim ring | HY- TR1 |
|
The JBL Professional Control 226C/T is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 226C/T incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.
The Control 226C/T features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for outstanding reliability and performance. The system is complete with a pre-attached back can and is designed for years of maintenance free use.
Easy to install, the Control 226C/T features JBL Professionalʼs proven C-Ring with Tile Rail suspension system. Installation can be accomplished from beneath the ceiling structure for instances when access above the ceiling tile is not possible. Additionally, the removable multi-pin locking connector, with secure screw-down terminals, allows for prewiring the input wires for easy clip-on convenience during installation.
A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 226C/T enabling the system to be used on 70V or 100V distributed speaker lines. The system can be used in either 8 ohm (low impedance) or transformer mode by selecting the desired function via the baffle mounted impedance switch.
The clean, contemporary look of the Control 226C/Tʼs grille is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.
Features
- Consistent 120° broadband pattern control forexceptional coverage
- Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
- Extraordinary clarity for speech and vocals withextended frequency response for music
- 150 Watts Power Handling
- Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
- Integrated back can with clean, contemporary grille
Specifications
- Frequency Response (-10dB): 47Hz to 19kHz
- Sensitivity: 90 dB; 95 dB computed for competitivecomparison
- Coverage Angle: 120 degrees conical, broadband
- Impedance: 8 ohms (in bypass model)
- Tap Settings: A) Common; B) 7.5W @ 70V, 15W @ 100V;C) 15 W @ 70V, 30 W @ 100V; D) 30 W @ 70V, 60 W @ 100V; E) 60 W @ 70V, n/c @100V
- Low Frequency: 6.5" woofer Kevlar reinforced cone
- High Frequency: 1" exit compression driver
- Dimensions (H x Dia): 13" round baffle x depth fromback of baffle of 9.7“
|
The Control 26-DT is a compact ceiling speaker assembly configured to install
into standard ceiling backcans designed for 200 mm (8 inch) speakers. High
power handling, wide frequency response and low distortion make the Control
26-DT ideal for sound systems requiring a higher fidelity sound, that integrates with many backcan designs.
* Transducer, Network and transformer.
* Fits standard backcans for 8-inch speakers.
* Wide coverage.
* Advanced crossover network provides even coverage throughout listening area.
* 60 Watt transformer for 70V or 100V lines.
* Coaxial 165 mm (6.5 inch) woofer with butyl rubber surround and 19 mm (¾ inch) titanium coated tweeter.
|
Reviews
There are no reviews yet.