AKG CBL 99 CONDENSER BOUNDARY MICROPHONE

Discontinued

124.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Polar pattern    omnidirectional (hemispherical) Frequency range    20 Hz to 20 kHz Sensitivity    20 mV/Pa (-34 dBV) Max. SPL    130 dB (for 1% THD) Equivalent noise level (IEC 60268-4)    16 dB Signal/noise ratio (A-weighted)    78 dB Bass filter    switchable flat or 150 Hz, 12 dB/octave Impedance    =2.000 ohms Supply voltage    9 to 52 V phantom power […]

 

Read more

Polar pattern    omnidirectional (hemispherical)
Frequency range    20 Hz to 20 kHz
Sensitivity    20 mV/Pa (-34 dBV)
Max. SPL    130 dB (for 1% THD)
Equivalent noise level (IEC 60268-4)    16 dB
Signal/noise ratio (A-weighted)    78 dB
Bass filter    switchable flat or 150 Hz, 12 dB/octave
Impedance    =2.000 ohms
Supply voltage    9 to 52 V phantom power to IEC 61938
Powering   

Weight 0.60 kg

Reviews

There are no reviews yet.

Be the first to review “AKG CBL 99 CONDENSER BOUNDARY MICROPHONE”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG CBL 99 CONDENSER BOUNDARY MICROPHONE removeAKG C 562CM OMNIDIRECTIONAL-HEMISPHERICAL CONDENSER BOUNDARY MIC removeAudio Technica U841A Omnidirectional condenser boundary microphone removeSHURE MX391/C Microphone BOUNDARY removeSHURE MX-393C - Cardioid Boundary Microphone removeAKG CBL 410 PCC WHITE Condenser microphone boundary remove
NameAKG CBL 99 CONDENSER BOUNDARY MICROPHONE removeAKG C 562CM OMNIDIRECTIONAL-HEMISPHERICAL CONDENSER BOUNDARY MIC removeAudio Technica U841A Omnidirectional condenser boundary microphone removeSHURE MX391/C Microphone BOUNDARY removeSHURE MX-393C - Cardioid Boundary Microphone removeAKG CBL 410 PCC WHITE Condenser microphone boundary remove
Image
SKUCBL 99C 562CMU841AMX391/CMX393CCBL 410 PCC WHITE
Rating
Price 124.00 incl. GR VAT 290.00 incl. GR VAT 325.00 incl. GR VAT 333.12 incl. GR VAT 281.00 incl. GR VAT 100.17 incl. GR VAT
Stock

Out of stock

In stock

In stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityOut of stockIn stockIn stockIn stockOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Polar pattern    omnidirectional (hemispherical)
Frequency range    20 Hz to 20 kHz
Sensitivity    20 mV/Pa (-34 dBV)
Max. SPL    130 dB (for 1% THD)
Equivalent noise level (IEC 60268-4)    16 dB
Signal/noise ratio (A-weighted)    78 dB
Bass filter    switchable flat or 150 Hz, 12 dB/octave
Impedance    =2.000 ohms
Supply voltage    9 to 52 V phantom power to IEC 61938
Powering   

C 562 CM 

Small, low-profile boundary layer microphone
Wide frequency range
High sensitivity
Ideal for inconspicuous installation in a room
Suited for surveillance or recording
 
The C 562 CM flush-mount boundary microphone uses the same transducer as the C 562 BL.
The C 562 CM has been designed specifically for permanent, "invisible" mounting in ceilings,
walls, tables, stage props, etc.
Owing to its high sensitivity, the C 562 CM is a perfect tool for surveillance or live recording
since a single microphone can cover an entire room. The supplied XLR phantom power adapter
connects to the microphone cable through a miniature connector so installation holes can be
smaller than the diameter of the phantom power adapter.
 
SPECIFICATIONS:
Polar pattern omnidirectional (hemispherical)
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 130 dB (k=1 %)
Equivalent noise level 16 dB-A
Signal/noise ratio (A-weighted) 78 dB
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power to DIN/IEC
Current consumption Connector 3-pin XLR
Cable 0.5 m (20 in.)
Finish matte nickel plated
Dimensions 20 dia. x 28 mm (0.8 dia. x 1.1 in.)
Net weight 30 g (1.1 oz.)
Shipping weight 195 g (76.9 oz.)
 

The U841A delivers exceptionally intelligible audio reproduction in a super-compact, low-profile design. Equipped with UniGuard® RFI-shielding technology, this omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording, television and conferencing in surface-mount applications. The U841A has a 360° pickup angle and operates on battery or phantom power.

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and silicon foam bottom pad minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance black finish for minimum visibility
  • Operates on battery or phantom power

 

  • Element: Fixed-charge back plate permanently polarized condenser
  • Polar Pattern: Omnidirectional in hemisphere above mounting surface
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: Phantom: -39 dB (11.2 mV) re 1V at 1 Pa Battery: -40 dB (10.0 mV) re 1V at 1 Pa
  • Impedance: Phantom: 200 ohms Battery: 270 ohms
  • Maximum Input Sound Level: Phantom: 132 dB, 1 kHz at 1% T.H.D. Battery: 122 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: Phantom: 111 dB, 1 kHz at Max SPL Battery: 101 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 73 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Battery Type: 1.5V AA/UM3
  • Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
  • Switch: Off, on-flat, on-roll-off
  • Cable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
  • Accessories: AT8531 power module; battery; soft protective pouch

 

 SHURE MX-391/C Microphone BOUNDARY

Microflex Boundary There's never been smarter boundary microphones than the Microflex models from Shure. With many models to choose from, equipped with features like programmable, silent membrane switches, logic inputs and outputs, and LED indicators, Microflex Boundary microphones are the high-quality solution for a range of applications, such as altars, boardrooms and distance learning centers. Every Microflex Boundary microphone features one of the new interchangeable condenser cartridges. Available in cardioid, supercardioid and omnidirectional polar patterns, the Microflex cartridges give you superior Shure quality sound options for every installation. In addition, their programmable switches offer the flexibility to be set for Push to Talk, Push to Mute or Push On/Push Off modes. Attractively designed with a low profile, professional appearance, the Microflex Boundary microphones come with an easy to use paint mask for your custom-color installations. Find out why we call the new Microflex Boundary microphones "the smart choice" for just about every application. Take a listen today.

 

Model Description
MX391/C - Cardioid Miniature Black Condenser Boundary Microphone, In-Line Preamp, 12 foot (4 meter) Attached Cable to 4-Pin Mini Connector
MX391/S - Supercardioid
MX391/O - Omnidirectional
MX391/C - Cardioid Miniature Black Condenser Boundary Microphone, 12 foot (4 meter) Attached Cable to 4-Pin Mini Connector, MX1BP Preamplifier
MX391/S - Supercardioid
MX391/O - Omnidirectional
MX391LP/C - Cardioid Miniature Black Condenser Boundary Microphone (Wireless Compatible), 12 foot (4 meter) Attached Cable to 4-Pin Mini Connector Less Preamplifier
MX391LP/S - Supercardioid
MX391LP/O - Omnidirectional
MX391WLP/C - Cardioid Miniature White Condenser (Wireless Compatible) Boundary Microphone, 12 foot Attached Cable to 4-Pin Mini Connector, Less Preamplifier
MX391WLP/S - Supercardioid
MX391WLP/O - Omnidirectional
MX391W/C - Cardioid Miniature White Condenser Boundary Microphone, 12 foot (4 meter) Attached Cable to 4-Pin Mini Connector, In-Line Preamplifier
MX391W/S - Supercardioid
MX391W/O - Omnidirectional
MX392/C - Cardioid Condenser Boundary Microphone, Built-in Preamp, Attached 12 foot (4 meter) Unterminated Cable, Logic Functions, Programmable Switch and LED Indicator
MX392/S - Supercardioid
MX392/O - Omnidirectional
MX393/C - Cardioid Condenser Boundary Microphone, Built-in Preamp, 12 foot (4 meter) 3-Pin Mini Connector (TA3F) to male XLR, Programmable Switch and LED Indicator

 

 MX393C - Condenser Boundary Microphone, Built-in Preamp, 12-ft Tini "QG" ? to XLR Cable, Programmable Switch and LED Indicator

About the AKG Acoustics CBL 410 PCC

The AKG CBL 410 PCC Conference Microphone Set (Black) is a simple to use, plug and play desktop microphone for use with any PC or laptop. It improves audio quality incredibly when making a conference via VOIP. The microphone reproduces the voice with a clear and natural sound.

With its 3.5 mm stereo jack, it is a 100% plug and play device. No drivers are needed. Its ability to be cascaded makes the CBL 410 PCC the perfect tool for modern communication for both single person use in the office and/or multi-person use in a modern meeting room.

This microphone provides optimum intelligibility and audio quality for your meetings. The CBL 410 PCC is also an excellent choice for recording applications.

AKG Acoustics CBL 410 PCC Includes
  • AKG 3x CBL 410 PCC PC Boundary Layer Microphones
  • GHAP1 USB Adapter
  • AKG Warranty
  AKG Acoustics CBL 410 PCC Features
  • Small and inconspicuous
  • Exceptionally rugged
  • Excellent sound quality
  • High sensitivity
  • Low self-noise
  AKG Acoustics CBL 410 PCC Specifications
Polar pattern Omnidirectional
Microphone Type Back electret condenser microphone
Frequency response 50 Hz to 20 kHz
Impedance 2000 ohms ±30% at 1000 Hz
Sensitivity -42 dB ±3 dB (7.9 mV/Pa)Sensitivity:
Maximum current consumption 0.5 mA
Supply voltage 1.5 to 5 V DC
Cable length 100cm (40“)
Connector TRS mini jack
   
Weight0.60 kg0.19 kg0.10 kg1.00 kg0.40 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.60 kg
Weight 0.19 kg
Weight 0.10 kg
Weight 1.00 kg
Weight 0.40 kg
Weight 1.00 kg