JBL CONTROL 14CT Ceiling Speaker 60W

153.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: CONTROL 14CT Category:
Control 14CT is a full-range ceiling speaker consisting of a 100 mm (4 inch) high tech cone driver and a 19 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blind-mount backcan for quick and easy installation. Components: – 100 mm (4.0 […]

 

Read more

Control 14CT is a full-range ceiling speaker consisting of a 100 mm (4 inch) high tech cone driver and a 19 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blind-mount backcan for quick and easy installation. Components: – 100 mm (4.0 in) high output driver with polypropylene cone and butyl rubber surround – 19 mm (0.75 in) soft-dome liquid-cooled tweeter – Blind-mount backcan for quick and easy install – Dual conduit/cable clamps Combined 70V/100V and low impedance direct operation – 30 Watts at 8Ω nominal setting – 25W multi-tap at 70V/100V – 74 Hz ? 20 kHz bandwidth with wide 120° coverage – White or black (-BK)

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “JBL CONTROL 14CT Ceiling Speaker 60W”

Your email address will not be published. Required fields are marked *

Quick Comparison

JBL CONTROL 14CT Ceiling Speaker 60W removeTOA F-2322C Ceiling Speaker 30W removeTOA F-2852C Ceiling Speaker 60W removeJBL CONTROL 24CT MICRO Ceiling 2 way speaker removeINTER-M MS-15 CEILING SPEAKER 15W 2WAY COAXIAL removeJBL CONTROL 226C/T-PL Ceiling Speaker, Coaxial 150W remove
NameJBL CONTROL 14CT Ceiling Speaker 60W removeTOA F-2322C Ceiling Speaker 30W removeTOA F-2852C Ceiling Speaker 60W removeJBL CONTROL 24CT MICRO Ceiling 2 way speaker removeINTER-M MS-15 CEILING SPEAKER 15W 2WAY COAXIAL removeJBL CONTROL 226C/T-PL Ceiling Speaker, Coaxial 150W remove
Image
SKUCONTROL 14CTF-2322CF-2852CCONTROL 24CT MICROMS-15CONTROL 226C/T-PL
Rating
Price 153.00 incl. GR VAT 145.00 incl. GR VAT 252.00 incl. GR VAT 122.00 incl. GR VAT 41.39 incl. GR VAT 424.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 2 left in stock

In stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 2 left in stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Control 14CT is a full-range ceiling speaker consisting of a 100 mm (4 inch) high tech cone driver and a 19 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blind-mount backcan for quick and easy installation. Components: - 100 mm (4.0 in) high output driver with polypropylene cone and butyl rubber surround - 19 mm (0.75 in) soft-dome liquid-cooled tweeter - Blind-mount backcan for quick and easy install - Dual conduit/cable clamps Combined 70V/100V and low impedance direct operation - 30 Watts at 8Ω nominal setting - 25W multi-tap at 70V/100V - 74 Hz ? 20 kHz bandwidth with wide 120° coverage - White or black (-BK)

  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications
Enclosure Bass reflex type
Rated Input 30W (high impedance)
Power Handling Capacity Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program: 120W(8Ω), 60W(16Ω)
Impedance (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W)
Impedance (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W)
Impedance (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W)
Low (Adjustable) 16Ω, 8Ω
Sound Pressure Level 90dB (1W, 1m)
Frequency Response 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: 12cm cone-type
Speaker Component Low frequency: 12cm cone-type
Mounting Hole ø200(maximum ceiling thickness: 37mm)
Input Terminal Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)
Usable Cable Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14)
Finish Enclosure: Steel plate, plating
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag n/a
Dimensions ø230 x 200 (D)mm
Weight 3.7kg (including mounting accessories)
Accessories Panel 1
Ceiling reinforcement ring 1
Safety wire 1
Paper pattern 1
Option Anchor hanging bracket HY- AH1
Back can HY- BC1
Tile bar bridge HY- TB1
Trim ring HY- TR1
  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.

Specifications
Enclosure Bass reflex type
Rated Input 60W (high impedance)
Power Handling Capacity Continuous pink noise: 90W(8Ω), 60W (16Ω)
Continuous program: 180W(8Ω), 120W(16Ω)
Impedance (100V Line) 170Ω (60W), 330Ω (30W) 670Ω (15W), 3.3kΩ (3W)
Impedance (70V Line) 83Ω (60W),170Ω (30W) 330Ω (15W), 670Ω (7.5W) 3.3kΩ (1.5W)
Impedance (25V Line) 83Ω (7.5W),170Ω (3.7W) 330Ω (1.9W), 670Ω (0.9W) 3.3kΩ (0.2W)
Low (Adjustable 16Ω, 8Ω
Sound Pressure Level 91dB(1W, 1m)
Frequency Response 60 - 20,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: Dome- type
Speaker Component Low frequency: 16cm cone-type
Mounting Hole ø250(maximum ceiling thickness: 37mm)
Input Terminal Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)
Usable Cable Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14)
Finish Enclosure Steel plate, plating
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag n/a
Dimensions ø280 x 227 (D)mm
Weight 5.1kg (including mounting accessories)
Accessories Panel 1
Ceiling reinforcement ring 1
Safety wire 1
Paper pattern 1
Option Anchor hanging bracket HY- AH1
Back can n/a
Tile bar bridge HY- TB1
Trim ring n/a
Electronic controller n/a

Full range compact ceiling speakers. Low distortion and a smooth, natural frequency response make the Control 24C Micro ideal for medium volume business music systems as well as for the medium to low SPL segments of larger or louder systems. The Control 24CT Micro includes a multitap transformer for 70V or 100V systems.

Specifications:

  • 85 Hz to 20 kHz frequency range
  • 30 watts continuous program power (15W pink noise) capacity
  • 86 dB sensitivity (1W/1m)
  • Shallow steel back-can (only 4 in deep)
  • 70V/100V Taps: 8W, 4W, 2W, 1W (and 0.5W for 70V only)

The JBL Professional Control 226C/T is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 226C/T incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.

The Control 226C/T features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for outstanding reliability and performance. The system is complete with a pre-attached back can and is designed for years of maintenance free use.

Easy to install, the Control 226C/T features JBL Professionalʼs proven C-Ring with Tile Rail suspension system. Installation can be accomplished from beneath the ceiling structure for instances when access above the ceiling tile is not possible. Additionally, the removable multi-pin locking connector, with secure screw-down terminals, allows for prewiring the input wires for easy clip-on convenience during installation.

A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 226C/T enabling the system to be used on 70V or 100V distributed speaker lines. The system can be used in either 8 ohm (low impedance) or transformer mode by selecting the desired function via the baffle mounted impedance switch.

The clean, contemporary look of the Control 226C/Tʼs grille is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.

Features

  • Consistent 120° broadband pattern control forexceptional coverage
  • Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
  • Extraordinary clarity for speech and vocals withextended frequency response for music
  • 150 Watts Power Handling
  • Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
  • Integrated back can with clean, contemporary grille

Specifications

  • Frequency Response (-10dB): 47Hz to 19kHz
  • Sensitivity: 90 dB; 95 dB computed for competitivecomparison
  • Coverage Angle: 120 degrees conical, broadband
  • Impedance: 8 ohms (in bypass model)
  • Tap Settings: A) Common; B) 7.5W @ 70V, 15W @ 100V;C) 15 W @ 70V, 30 W @ 100V; D) 30 W @ 70V, 60 W @ 100V; E) 60 W @ 70V, n/c @100V
  • Low Frequency: 6.5" woofer Kevlar reinforced cone
  • High Frequency: 1" exit compression driver
  • Dimensions (H x Dia): 13" round baffle x depth fromback of baffle of 9.7“
Weight1.00 kg3.70 kg5.10 kg2.00 kg3.00 kg7.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 3.70 kg
Weight 5.10 kg
Weight 2.00 kg
Weight 3.00 kg
Weight 7.00 kg