| Content |
One 1" pure aluminum dome tweeter.
One 6-1/2" BDSS cast basket driver pressure coupled
to one 6“x10" low bass radiator.
Freq. Response: 32 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 90 dB.
Rec. Ampl. Power: 20 - 225 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 32.9 x 20 x 31 cm.
Weight: 7 kg each.
|
ME 120
Enclosure Bass reflex type
Power Handling Capacity Continuous pinknoise: 50W
Rated Impedance 6 ohms
Sensitivity 88dB (1W, 1m)
Frequency Response 60 ? 18,000Hz
Crossover Frequency ?
Speaker Component 16cm cone-type (magnetically shielded)
Input Terminals Screw terminals (compatible with a dual-banana plug),
gold plated
Finish Enclosure: MDF, black, paint Front grill: Cloth, black
Dimensions 170 (W) ? 264 (H) ? 194 (D) mm
Weight 3.6kg (per unit)
Mounting Brackets (option) WCB-12, WCB-31, CMB-31 |
The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.
FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling
SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz) 106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)
|
The alphaton Direct Injection-Box SM-50 allows direct connection of electric guitars,
electric bass, and electronic music instruments with mixing desks of PA systems
and of recording studios.
The SM-50 reduces the amount of microphones used on stage, thus improving gain
before feedback.
Coloration of sound is avoided. Clean signal without interference from other instruments
eases the job of the recording engineer. The use of a strong aluminium die-cast box allows
trouble-free function for a number of years even under adverse conditions. Double grounding
(hum) can be eliminated by activating the built-in ground-lift switch. Isolation voltage between
input and output is 2500 volts, against ground 1500 volts (with ground-lift switch activated).
The box thus complies with toughest safety standards.
Technical Data
input impedance 20 kOhm
input impedance, instrument
input impedance, line-In
input impedance, speaker
output impedance 200 Ohm
frequency response 30 ... 20000 Hz, ± 1 dB
THD
isolation voltage tranformer pri/sec 2500 V
outpur to ground 1500 V
inputs 1/4" phone jacks, unbalanced
outputs XLR, balanced, microphone level.
pin 1 = ground, pin 2 = hot, pin 3 = cold
case aluminium die-cast
weight 230 g
dimensions113 x 71 x 37 mm
| Behringer DI-400P High-Performance Passive Direct Injection Box
Introducing the Ultra-Compact DI-Boxes from BEHRINGER
There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal.
The DI400P lets you connect instruments or amplifier outputs. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies.
This is the sort of medicine that?ll cure headaches in your studio or on stage. |
The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection. Connections are dual Neutrik Speakon and 1/4" jacks. With professional features, excellent sonic performance, and great value, Yamaha Club Concert Series loudspeakers deliver premium quality night after night.
The CW118V enclosure houses a powerful cast-frame 18" woofer with a frequency response of 30Hz - 2kHz. 600W program handling, 1,200W peak. Sensitivity: 96dB. 22“W x 32“H x 25“D. 71 lbs.
Yamaha CW118V 18" Club Concert Series Subwoofer Speaker Features:
- Tough, paintable exterior coating
- Cast-frame 18" woofer
- Frequency response of 30Hz-2kHz (-10dB)
- 600W program handling/1,200W peak
- Sensitivity: 96dB
- 22“W x 32“H x 25“D
|
Reviews
There are no reviews yet.