| Content | Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
Features
- For use with DN-202WR
- Sends audio up to 30m (100 ft) without wires
- XLR and 1/4” audio inputs
- Able to broadcast to multiple receivers (sold seperately)
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
Package Contents
- DN-202WT
- Power adapter (5VDC, 3A, center-positive)
- User Guide
- Safety and warranty manual
|
Amplifier power (watts): 20 watts (RMS)
Controls: Volume & power
W x H x D (mm): 387 x 155 x 130
Weight (kg): 2.25
Frequency response (Hz): 70 - 18,000
Connections: Additional stereo input via 3.5mm minijack for use with non-Bluetooth enabled devices
Finish: Black |
| Construction |
Mono speaker |
| Built-in Class-D Power Amplifiers |
2 |
| Drivers |
2 |
| Tweeter |
1 x 25 mm |
| Mid-Range |
No |
| Woofer |
1 x 89 mm |
| High Resolution Audio support |
Yes |
| USB input (mass storage) |
Yes |
| Analog input (3.5mm mini jack) |
Yes |
| Stereo Pairing |
Yes |
| Usage as Surround SPK for Soundbar DHT-S716H |
Yes |
| Supports Subwoofer with HEOS built-in |
Yes |
| Bass and Treble Control |
Yes |
| Proximity Sensor |
Yes |
| Quick Select Buttons |
3 |
| Volume +/- |
Yes |
| Play/Pause |
Yes |
| HEOS built-in |
Yes |
| WiFi 2.4 GHz |
IEEE 802.11b/g/n |
| WiFi 5 GHz |
IEEE 802.11a/n/ac |
| Airplay 2 |
Yes |
| Bluetooth |
Yes |
| USB port for direct connection of stored music |
Yes |
| Wired Network (RJ-45) |
Yes |
| 3.5mm AUX Input |
Yes |
| Available colors: White / Black |
Yes / Yes |
| Power Supply (built-in) |
AC 100 – 240 V, 50/60 Hz |
| Dimensions (W x H x D) |
120 x 187 x 120 mm |
| Weight in kg |
1.7 |
|
Turn your mobile, smartphone, tablet or computer into a wireless hi-fi component. By connecting our new BT100 to any supported Cambridge Audio product, you can now stream music wirelessly from your iPhone, smartphone, iPad, tablet, laptop or any device that supports Bluetooth to your hi-fi or entertainment system.
aptX audio enhancement on board
If your smartphone or tablet supports the aptX audio enhancement CODEC the BT100 can support it as well. AptX, which is featured on a growing number of mobile devices as well as MacBooks and Apple desktop computers, allows audio to be broadcast wirelessly in significantly higher quality than over standard Bluetooth. You'll instantly notice more extensive dynamic range, deeper bass and crystal-clear top end.
aptX explained
Standard Bluetooth codec (SBC) has variable performance and its weaknesses are very apparent to music lovers including a reduction in high end clarity, muddiness or dullness on stringed content. Conversely, the aptX codec has a fixed performance standard to guarantee a consistently excellent quality when music data is transferred wirelessly over Bluetooth. With almost CD-quality reproduction on offer, you'll instantly experience significantly greater dynamics and infinitely more detail from your favourite music.
|
Bluetooth Receiver
- Magnetic holder on the back
- 2 Symmetrical 6.3 mm jack outputs
- Dimensions (W x D x H): 100 x 64 x 34 mm
- Weight: 116 g
- Includes power supply
| Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
- For use with DN-202WT
- Receives audio up to 30m (100 ft) without wires
- Use multiple DN-202WR in a system for more coverage
- XLR and 1/4” audio outputs
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
|
Reviews
There are no reviews yet.