Denon Professional DN-500R SD and USB Recorder

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8

The Denon Professional DN-500R SD and USB Recorder is a 1U rack mountable recorder and audio playback device designed for installed sound applications such as houses of worship, education, and more. The unit can record to both SD/SDHC cards and USB media either one at a time for longer recording times or simultaneously to both mediums for backup.

The front panel of the recorder features an OLED display for showing information such as time, sample rate, and file name. A set of rubberized buttons control basic functions such as record, stop, pause, play, forward, back, as well as menu control and file management functions such as move, copy, combine, divide, and undo. A shift button changes these buttons to functions such as dimming the display, marking files, record monitoring, switching to frame mode, and adjusting pitch. A rotary knob button controls recording level, recording balance, and navigates the menu settings. The front of the unit has an SD/SDHC card slot for inserting recording media with ejection button, as well as a USB female type A port for plugging in USB media such as thumb drives and external USB hard drives. A second USB female type A port allows you to plug in a USB QWERTY keyboard for entering file information while recording. The unit also includes a 1/4" headphone out and headphone level control knob for monitoring while recording or listening to recorded tracks.

For I/O, the back of the unit features left and right balanced analog 3-pin XLR female inputs, left and right unbalanced analog RCA inputs, a balanced digital 3-pin XLR AES/EBU input, an unbalanced digital coaxial SPDIF input, left and right balanced analog 3-pin XLR male outputs, left and right unbalanced analog RCA outputs, a balanced digital 3-pin XLR AES/EBU output, and an unbalanced coaxial SPDIF output. For remote control, the unit features both an RS-232C and a 25-pin parallel port. The included rack ears are removable for tabletop operation.

• Record to SD/SDHC card (Up to 32GB)
• Simultaneously record up to 4 tracks
• Record Mode：MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
• Recording format：44.1/48/96kHz 16/24bit (WAV/BWF)
• TASCAM original HDDA microphone preamps
• Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
• Two XLR/TRS inputs support +4dBu line level input and phantom power (24 or 48VDC on XLRF)
• Plug-in power and high-output mic input supported on inputs 3-4
• CAMERA OUT connector for output from the DR-60D's mixer (adjustable gain)
• CAMERA IN connector for sound monitoring from the camera
• Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
• 50mW/ch headphone output
• Tripod mounting socket (bottom) and DSLR mounting screw attachment (top)
• Handles protect the screen and can be used to attach a shoulder strap
• Soft-Touch Rubber Keys for silent operation
• HOLD switch to prevent accidental operation
• QUICK button feature for easy access to various functions
• 128x64 pixel LCD with backlight
• USB 2.0 connection for high-speed transferring of files
• Mini USB cable included
• Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
• Can extend battery life with BP-6AA battery pack (sold separately)
• Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
• Internal mixer: PAN and LEVEL controls
• Low cut filter(40/80/120Hz)
• Limiter (1/L and 2/R can be selected for link-operation)
• Delay function for microphone distance adjustment (up to 150ms)
• M-S decode function
• Slate tone generator (AUTO/MANUAL)
• Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
• Selectable slate tone generation. 3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated
• File name format can be set to use a user-defined word or date
• Dual-recording function allows two files to be recorded simultaneously at different levels
• Auto-record function can automatically start and stop recording at set level
• Pre-recording function allows the unit to record a 2 second sound buffer before recording is activated
• Self-timer function for solo recording
• New file starts recording automatically without interruption when maximum file size is reached
• Track incrementing function allows a recording to be split by creating a new file when desired
• Jump back and play function
• Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
• Resume function to memorize the playback position before the unit is turned off
• MARK function up to 99 points per audio track
• DIVIDE function

• The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
• The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
• If recorded in mono in WAV files, the maximum recording time will be double the figures above.
• For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.

• Eight mono tracks
• CD-quality recording (16bit/44.1kHz)
• Two tracks simultaneous recording/ eight tracks simultaneous playback
• Dedicated stereo master track available
• Record to SD/SDHC card (Up to 32GB)
• 2 Built-in omni-directional condenser microphones
• Microphone sensitivity can be selected from 2-positions (Low/High)
• Two TS 1/4" or XLR mic/line inputs
• INPUT A can connect high-impedance instrument directly (Like an electric-guitar)
• Phantom power supply
• Independent LEVEL/PAN/Reverb SEND knobs for each track
• Two RCA unbalanced line inputs
• 20mW/ch headphone output
• Footswitch ready with polarity switching (Notice: can't use RC-3F)
• 128x64 dot-matrix LCD with backlight
• Four AA batteries operation up to 6.5 hours (When recording, using the eneloop battery)
• Insert effects for input channels (2-band shelving EQ, compressor, exciter, de-esser)
• Mastering effects (2-band shelving EQ, multi-band compressor, normalize)
• Auto analysis mastering function
• 2-band shelving EQ for each track
• Reverb effects (Hall1/2,Room,Studio,Plate1/2)
• Optional AC adapter ready (TASCAM PS-P520)
• Can connect an external battery pack (TASCAM BP-6AA)
• Direct locate function by jog-wheel
• Repeat playback between IN/OUT point
• Track edit functions（COPY PASTE, COPY INSERT, MOVE PASTE, MOVE INSERT, OPEN, CUT, SILENCE, CLONE TRACK, CLEAN OUT)
• Bounce function allows recording of more six tracks
• UNDO/REDO(UNDO HISTORY) function
• Chromatic tuner and metronome included
• High-speed data transfer by USB2.0 connection
• Backup and restore songs
• File import/export by Wav format (mono/stereo)
• Export stereo master file as stereo wav format
• 2GB SD card included

The TASCAM SS-200 Solid State Recorder - designed for the Broadcast and Contractor markets - record in WAV & MP3 to Compact Flash, SD/SHC, and USB memory. The SS-R200 features parallel and RS-232C serial control balanced & unbalanced I/O, and coaxial digital I/O.  It supports the RC-20 direct play remote for up to 20 tracks of flash start.

• Solid state recoding to any available Media (CF, SD/SDHC, USB Memory)
• One-rack-space compact design
• Up to 20 tracks of flash start with RC-20 and RC-SS20 remote control devices
• PS/2 or USB keyboard connection for file name edit, transport control, edit and flash start
• RS-232C and Parallel Control I/O
• Multiple playback modes for situations requiring continuous, single, programmed and random playback
• Playback speed control without pitch change
• XLR balanced I/O, RCA unbalanced I/O, coaxial S/PDIF, or AES/EBU digital I/O
• Dimensions (W x H x D): 19 x 1.8 x 11.9 (in)  482.6 x 44.5 x 301 (mm)
• Weight:  7.50 (lbs)  3.4(kg)

The Tascam iM2X turns an Apple iPhone 4, iPad or iPod Touch 4G into a powerful PCM audio recorder for CD-quality recordings. It consists of a pair of condenser microphones and a high-quality preamp and plugs into the dock connector of the iOS device. The microphone elements are XY oriented for clear stereo definition and minimal phase differences. Moreover, they are adjustable over 180 degrees for the best sound placement.

Unlike mics that use the iOS deviceʼs built-in preamp, the iM2X with its internal A/D converter ensures low noise and better linearity in frequency response. The microphone elements also used in Tascam DR series recorders can handle sound pressure levels up to 125 dB to capture the loudest concerts and instruments without distortion. Thanks to an input level control and a two-colour level meter, level adjustment is very simple. A switchable limiter also contributes to this by reducing sudden peaks and protecting against unforeseen overload.

The iM2X powered through the dock connector, so no battery is required. A USB input is provided to charge the iOS device for long recordings, either through a computer or a USB charger.

An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from AppStore at no charge.

Main Features

Turns your Apple iPhone 4, iPad or iPod Touch 4G into a high-grade PCM audio recorder
Stereo condenser microphone in XY orientation for clear stereo definition and minimal phase differences
Accepts sound pressure level up to 125 dB SPL
Microphone can be swivelled by 180 degrees to capture sound sources in front or behind the unit
Allows recordings in CD quality (44.1kHz/16-bit)
Input level rotary control
Input level indicator (green/red)
Switchable limiter to avoid distorted recordings
Power supply via dock connector, no battery required
USB connector available for recharging the iOS device
Easy setup (attaches to the deviceʼs dock connector)
Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge
Specifications

General
Microphone type        Cardioid condenser (stereo)
Maximum input level        125 dB SPL
Input level adjustment range        0–40 dB
Frequency range        10 Hz – 20 kHz
Sampling frequency        44.1 kHz
Bit rate        16 bit
iOS device recharging port        USB Mini-B connector
iOS device connector        30-pin dock connector
Device support        iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad or iPod touch (4th generation)
Power supply and other specifications
Power supply        Provided through the iOS device connector
Power consumption        90 mW
Dimensions (W x H x D)        56 mm x 57 mm x 22 mm (including connector)
Weight        30 g
Operating temperature range        5–35 °C
Design and specifications subject to change without notice.